• Braking/Drive Dynamics: for vehicles with ABS
• Vehicle Identification Number (VIN) to: 8CP050000
• Block Separation:
• Vehicle Identification Number (VIN) from: 8CP050001
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Transmission Type: Manual Transmission
• Block Separation:
• Vehicle Identification Number (VIN) from: 8CP000001
• Construction Year to: 07.1993
• Construction Year from: 07.1993
• Fitting Position: Front Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 13
• Number of Holes: 4
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Construction Year from: 07.1993
• Transmission Type: Automatic Transmission
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Fitting Position: Rear Axle
• Centering Diameter [mm]: 68
• Height [mm]: 59
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Minimum thickness [mm]: 8
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 8C-P-050001
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Bore Diameter [mm]: 15.4
• Brake Disc Thickness [mm]: 10
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 4
• Inner Diameter [mm]: 135.8
• Height [mm]: 59.5
• Centering Diameter [mm]: 68
• Outer Diameter [mm]: 245
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Height [mm]: 59.3
• Rim Hole Number: 4
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Hub Diameter [mm]: 145
• Weight [kg]: 3.52
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Centering Diameter [mm]: 68
• Brake Disc Thickness [mm]: 10
• Height [mm]: 59.5
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES
• Quantity per packing unit: 2

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 8CN300000
• Brake Disc Type: solid
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 13
• Fitting Position: Front Axle
• Centering Diameter [mm]: 68
• Height [mm]: 56
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Minimum thickness [mm]: 11
• Name: PIDURIKETAS
• Manufacturer: MAX
• Lisainfo: 19-0985
• Additional information: 19-0985

• Vehicle Identification Number (VIN) from: 8C-P-050001
• Block Separation:
• Vehicle Identification Number (VIN) to: 8C-P-050 000
• Braking/Drive Dynamics: for vehicles with ABS
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 245
• Height [mm]: 59
• Centering Diameter [mm]: 68
• Surface: Coated
• Minimum thickness [mm]: 8
• Hole Arrangement/Number: 4/4
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Surface: Painted
• Centering Diameter [mm]: 68
• Height [mm]: 59
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Minimum thickness [mm]: 8
• Name: PIDURIKETAS
• Manufacturer: MAX

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Thickness [mm]: 59.2
• Outer Diameter [mm]: 245
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Weight [kg]: 3.5
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Thickness [mm]: 59
• Outer Diameter [mm]: 245
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Weight [kg]: 3.5
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8C-P-050001
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Brake Disc Type: solid
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 59.5
• Centering Diameter [mm]: 68
• Test Mark: ECE R90
• Article number of recommended accessories: 131-07-653, 131-07-654
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 59
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 245
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 68
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0100/1592
• Surface: Oiled
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Height [mm]: 59.1
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG2343

• Vehicle Identification Number (VIN) from: 8CP000001
• Brake Disc Type: solid
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 12.9
• Fitting Position: Front Axle
• Centering Diameter [mm]: 68
• Height [mm]: 56.3
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Minimum thickness [mm]: 11
• Name: PIDURIKETAS
• Manufacturer: MAX

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 245
• Height [mm]: 59.5
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Bolt Hole Circle Ø [mm]: 108
• Wheel Bolt Bore Diameter [mm]: 15.4
• Number of Holes: 4
• Brake Disc Type: solid
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Vehicle Identification Number (VIN) to: 8CN300000
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 56.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 13
• Outer Diameter [mm]: 256
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 68
• Manufacturer: CIFAM

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Rim Hole Number: 4
• Height [mm]: 56.5
• Brake Disc Thickness [mm]: 13
• Outer Diameter [mm]: 280
• Hub Diameter [mm]: 68
• Wheel Bolt Bore Diameter [mm]: 108
• Manufacturer: JPN

• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 8C-P-000001
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 280
• Hub Diameter [mm]: 146.5
• Centering Diameter [mm]: 68
• Brake Disc Thickness [mm]: 13
• Height [mm]: 56.5
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Brake Disc Type: Vented
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 22
• Fitting Position: Front Axle
• Centering Diameter [mm]: 68
• Height [mm]: 56
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Minimum thickness [mm]: 20
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 8C-P-000001
• Minimum thickness [mm]: 11
• Brake Disc Type: solid
• Bore Diameter [mm]: 15.4
• Brake Disc Thickness [mm]: 13
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 4
• Inner Diameter [mm]: 159
• Height [mm]: 56.5
• Centering Diameter [mm]: 68
• Outer Diameter [mm]: 280
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Quantity per packing unit: 2

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 8CP050000
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Height [mm]: 60
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 68
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 8
• Weight [kg]: 3.5
• Hole Arrangement/Number: 4/4
• Manufacturer: ZIMMERMANN

• Vehicle Identification Number (VIN) to: 8C-N-300000
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Number of Holes: 4
• Minimum thickness [mm]: 11
• Height [mm]: 56
• Brake Disc Type: solid
• Centering Diameter [mm]: 68
• Brake Disc Thickness [mm]: 13
• Outer Diameter [mm]: 256
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Height [mm]: 59.2
• Bolt Hole Circle Ø [mm]: 107.95
• Brake Disc Type: solid
• Centering Diameter [mm]: 68
• Number of Holes: 4
• Surface: Oiled
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.3
• Manufacturer: BOSCH
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Height [mm]: 59
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Thread Size: 16
• Minimum thickness [mm]: 8
• Number of bores: 4
• Outer Diameter [mm]: 245
• Centering Diameter [mm]: 68
• Bolt Hole Circle Ø [mm]: 108
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Vehicle Identification Number (VIN) to: 8C-P-050000
• Block Separation:
• Vehicle Identification Number (VIN) from: 8C-P-050001
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Brake Disc Type: solid
• Minimum thickness [mm]: 8
• Height [mm]: 59.2
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 68
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Number of Holes: 4
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Height [mm]: 59
• Number of Holes: 4
• Thread Size: 16
• Bolt Hole Circle Ø [mm]: 108
• Colour: black
• Surface: Painted
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 8CN300000
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 56.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 13
• Outer Diameter [mm]: 256
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 68
• Manufacturer: METELLI UKL.HAMULCOWY

• Vehicle Identification Number (VIN) from: 8C-P-000001
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 280
• Number of Holes: 4
• Minimum thickness [mm]: 11
• Brake Disc Type: solid
• Centering Diameter [mm]: 68
• Height [mm]: 56
• Brake Disc Thickness [mm]: 13
• Manufacturer: LPR

• Vehicle Identification Number (VIN) from: 8C-P-000001
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 13
• Brake Disc Type: solid
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 56.5
• Centering Diameter [mm]: 68
• Test Mark: ECE R90
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Identification Number (VIN) to: ******8C*N*300000
• Brake Disc Thickness [mm]: 13
• Rim Hole Number: 4
• Outer Diameter [mm]: 256
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Front Axle
• Weight [kg]: 4.57
• Observe service information:
• Manufacturer: FEBI HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: ******8C*P*000001
• Brake Disc Thickness [mm]: 13
• Rim Hole Number: 4
• Outer Diameter [mm]: 280
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Front Axle
• Weight [kg]: 5.039
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 8C-P-000001
• Fitting Position: Front Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 13
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 4
• Height [mm]: 57
• Centering Diameter [mm]: 68
• Surface: Coated
• Outer Diameter [mm]: 280
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) to: 8C-N-300 000
• Fitting Position: Front Axle
• Outer Diameter [mm]: 256
• Height [mm]: 56.5
• Brake Disc Thickness [mm]: 13
• Minimum thickness [mm]: 11
• Centering Diameter [mm]: 68
• Bolt Hole Circle Ø [mm]: 108
• Wheel Bolt Bore Diameter [mm]: 15.4
• Number of Holes: 4
• Brake Disc Type: solid
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 8CP000001
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 56.2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12.9
• Outer Diameter [mm]: 280
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 68
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0100/1555
• Surface: Oiled
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 13
• Minimum thickness [mm]: 11
• Centering Diameter [mm]: 68
• Height [mm]: 56.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG2783

• Vehicle Identification Number (VIN) from: 8C-P-000001
• Transmission Type: Automatic Transmission
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Height [mm]: 56
• Centering Diameter [mm]: 68
• Outer Diameter [mm]: 280
• Minimum thickness [mm]: 20
• Brake Disc Thickness [mm]: 22
• Brake Disc Type: internally vented
• Number of Holes: 4
• Manufacturer: LPR

• Vehicle Identification Number (VIN) from: 8C-P-050001
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 59.5
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 135.8
• Bore Diameter [mm]: 15.4
• Test Mark: E1 90R-02C0165/1152
• MAPP code available:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Thickness [mm]: 56
• Outer Diameter [mm]: 280
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 68
• Weight [kg]: 5.765
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 8C-P-000 001
• Fitting Position: Front Axle
• Outer Diameter [mm]: 280
• Height [mm]: 56
• Brake Disc Thickness [mm]: 13
• Minimum thickness [mm]: 11
• Centering Diameter [mm]: 68
• Bolt Hole Circle Ø [mm]: 108
• Wheel Bolt Bore Diameter [mm]: 15.4
• Number of Holes: 4
• Brake Disc Type: solid
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Vehicle Identification Number (VIN) to: 8C-P-050000
• Block Separation:
• Vehicle Identification Number (VIN) from: 8C-P-050001
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Height [mm]: 59.2
• Minimum thickness [mm]: 8
• Inner Diameter [mm]: 135.5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 68
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Diameter [mm]: 15.3
• Packaging length [cm]: 26.3
• Packaging width [cm]: 26.3
• Packaging height [cm]: 13.5
• Weight [kg]: 3.6
• Manufacturer: TEXTAR TARCZE HAMULCOWE

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 8CN300000
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 13
• Minimum thickness [mm]: 11
• Centering Diameter [mm]: 68
• Height [mm]: 56
• Number of Holes: 4
• Thread Size: 15,5
• Bolt Hole Circle Ø [mm]: 108
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0190/0142
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) to: 8C-N-300000
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 13
• Number of Holes: 4
• Height [mm]: 56
• Centering Diameter [mm]: 68
• Outer Diameter [mm]: 256
• Minimum thickness [mm]: 11
• Tightening Torque [Nm]: 120
• Name: BR 08.5714.10
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 8C-N-300000
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 13
• Height [mm]: 56.3
• Minimum thickness [mm]: 11
• Inner Diameter [mm]: 134.6
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 68
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Diameter [mm]: 15.5
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 15.5
• Weight [kg]: 4.7
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Special Purpose Vehicle: for taxis
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 22
• Height [mm]: 56.5
• Rim Hole Number: 4
• Brake Disc Type: Vented
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Hub Diameter [mm]: 146
• Weight [kg]: 6.24
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Brake Disc Thickness [mm]: 22
• Rim Hole Number: 4
• Thickness [mm]: 56.3
• Outer Diameter [mm]: 280
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 68
• Weight [kg]: 5.765
• Observe service information:
• Manufacturer: FEBI-UKLAD HAMULCOWY
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 8C-P-000001
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 13
• Number of Holes: 4
• Height [mm]: 56
• Centering Diameter [mm]: 68
• Outer Diameter [mm]: 280
• Minimum thickness [mm]: 11
• Tightening Torque [Nm]: 120
• Manufacturer: BREMBO
• Name: BR 08.5709.10

• Transmission Type: Automatic Transmission
• Vehicle Identification Number (VIN) from: 8C-P-000001
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 56.2
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 22
• Outer Diameter [mm]: 280
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 68
• Manufacturer: METELLI UKL.HAMULCOWY

• Vehicle Identification Number (VIN) from: 8CP000001
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Height [mm]: 56.2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 13
• Minimum thickness [mm]: 11
• Number of bores: 4
• Outer Diameter [mm]: 280
• Centering Diameter [mm]: 68
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 13
• Height [mm]: 57
• Rim Hole Number: 4
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 68
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 11
• Weight [kg]: 5.1
• Hole Arrangement/Number: 4/4
• Manufacturer: ZIMMERMANN

• Vehicle Identification Number (VIN) from: 8C-P-000 001
• Vehicle Equipment: for vehicles with automatic transmission
• Fitting Position: Front Axle
• Outer Diameter [mm]: 280
• Height [mm]: 56.5
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 68
• Bolt Hole Circle Ø [mm]: 108
• Wheel Bolt Bore Diameter [mm]: 15.4
• Number of Holes: 4
• Brake Disc Type: Vented
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 13
• Minimum thickness [mm]: 11
• Height [mm]: 56
• Bolt Hole Circle Ø [mm]: 107.95
• Brake Disc Type: solid
• Centering Diameter [mm]: 68
• Number of Holes: 4
• Surface: Oiled
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.3
• Manufacturer: BOSCH
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 8CP000001
• Quantity per packing unit: 2
• Surface: Painted
• Brake Disc Type: solid
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 12.9
• Minimum thickness [mm]: 11
• Centering Diameter [mm]: 68
• Height [mm]: 56.3
• Number of Holes: 4
• Thread Size: 15,6
• Bolt Hole Circle Ø [mm]: 108
• Machining: High-carbon
• Colour: black
• Test Mark: E1 90R-02 C0190/0527
• Name: PIDURIKETAS
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Rim Hole Number: 4
• Height [mm]: 59.3
• Brake Disc Thickness [mm]: 9.9
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 245
• Centering Diameter [mm]: 68
• Manufacturer: PROFIPOWER

• Vehicle Identification Number (VIN) to: 8C-P-000001
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 13
• Minimum thickness [mm]: 11
• Brake Disc Type: solid
• Number of Holes: 4
• Surface: Coated
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 56.5
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 134.5
• Bore Diameter [mm]: 15.4
• Test Mark: E1 90R-02C0165/0630
• Name: PIDURIKETAS
• Manufacturer: ATE

• Fitting Position: Front Axle
• Transmission Type: Automatic Transmission
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Height [mm]: 56.3
• Bolt Hole Circle Ø [mm]: 108
• Brake Disc Type: Vented
• Centering Diameter [mm]: 68
• Number of Holes: 4
• Surface: Coated
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.5
• Manufacturer: BOSCH
• Quantity per packing unit: 2

• Vehicle Identification Number (VIN) from: 8C-P-000001
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 13
• Minimum thickness [mm]: 11
• Brake Disc Type: solid
• Machining: High-carbon
• Number of Holes: 4
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 56.5
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 159
• Bore Diameter [mm]: 15.4
• MAPP code available:
• Test Mark: E1 90R-02C0165/0502
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Block Separation:
• Vehicle Identification Number (VIN) from: 8C-P-000001
• Construction Year to: 07.1993
• Construction Year from: 07.1993
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 13
• Height [mm]: 56.2
• Minimum thickness [mm]: 11
• Inner Diameter [mm]: 159
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 68
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Diameter [mm]: 15.5
• Packaging length [cm]: 31.3
• Packaging width [cm]: 31.3
• Packaging height [cm]: 14
• Weight [kg]: 5.2
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Transmission Type: Automatic Transmission
• Vehicle Identification Number (VIN) from: 8C-P-000001
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 22
• Number of Holes: 4
• Height [mm]: 56
• Centering Diameter [mm]: 68
• Outer Diameter [mm]: 280
• Minimum thickness [mm]: 20
• Tightening Torque [Nm]: 120
• Manufacturer: BREMBO
• Name: BR 09.7821.10

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Fitting Position: Front Axle
• Construction Year from: 07.1993
• Transmission Type: Automatic Transmission
• Quantity per packing unit: 2
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 22
• Height [mm]: 56.2
• Minimum thickness [mm]: 20
• Inner Diameter [mm]: 146
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 68
• Hole Arrangement/Number: 04/04
• Wheel Bolt Bore Diameter [mm]: 15.5
• Packaging length [cm]: 31.3
• Packaging width [cm]: 31.3
• Packaging height [cm]: 14
• Weight [kg]: 6.2
• Name: PIDURIKETAS
• Manufacturer: TEX
• Quality class: Q

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Vehicle Identification Number (VIN) from: 8C-P-000001
• Transmission Type: Automatic Transmission
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 4
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 56.5
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 146
• Bore Diameter [mm]: 15.4
• Test Mark: E1 90R-02C0118/0179
• Name: PIDURIKETAS
• Manufacturer: ATE

• Fitting Position: Front Axle
• Transmission Type: Automatic Transmission
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 4
• Machining: High-carbon
• Outer Diameter [mm]: 280
• Brake Disc Thickness [mm]: 22
• Minimum thickness [mm]: 20
• Centering Diameter [mm]: 68
• Height [mm]: 56
• Bolt Hole Circle Ø [mm]: 108
• Bore Diameter up to [mm]: 15.5
• Quality class: PJ
• Name: Brake discs

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"