Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 2
- Colour: blue
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins
- Number of pins: 2
- Housing Colour: black
- Connector Shape: angular
-
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins
-
Thread Size: M 22x1,
5 - Spanner Size: 29
- Number of connectors: 2
- Plug Type: Blade Terminal
-
Lisainfo: Thermo switch for fan 95-
90 C -
Additional information: Thermo switch for fan 95-
90 C
- Construction Year to: 08.1994
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 90
-
Lisainfo: Thermo switch for fan 85-
80 C -
Additional information: Thermo switch for fan 85-
80 C
- Model Year to: 1993
-
Vehicle Identification Number (VIN) from: 8C-
N- 000 001 -
Vehicle Identification Number (VIN) to: 8C-
N- 300 000 - Block Separation:
- Vehicle Equipment: for vehicles with air conditioning
- Number of pins: 3
- Switch Point [°C]: 118
- Colour: brown
-
Lisainfo: Thermo switch for cooling system 118 C,
M14x1.5 -
Additional information: Thermo switch for cooling system 118 C,
M14x1.5
- for OE number: 049919563B
- Thread Size: M10x1 mm
- Spanner Size: 13 mm
- Number of pins: 1
- Manufacturer: KAMOKA
- Additional information: 4080049 KAMOKA
- Lisainfo: 4080049 KAMOKA
- Vehicle Equipment: for vehicles with air conditioning
- Connector Shape: rectangular
- Sensor Type: NTC Sensor
- Number of pins: 2
-
Colour Coding: black/
green - Manufacturer: TOPRAN HANS PRIES
- Lisainfo: 103 327 HP
- Additional information: 103 327 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with automatic climate control
- Connector Shape: rectangular
- Sensor Type: NTC Sensor
- Number of pins: 2
- Colour Coding: blue
- Manufacturer: HANS PRIES
- Lisainfo: 100 191 HP
- Additional information: 100 191 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 12.1994
- Vehicle Equipment: for vehicles with air conditioning
-
Colour Coding: black/
green - Connector Shape: rectangular
- Number of pins: 2
- Outer Diameter [mm]: 20
- for OE number: 1669949
- Manufacturer: DELLO AUTOMEGA
- for OE number: 025906041A
- Housing Colour: blue
- Manufacturer: KAMOKA
- Manufacturer: AIC
- Lisainfo: 51913 AIC
- Additional information: 51913 AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 251919501A
- Manufacturer: KAMOKA
- Colour Coding: green
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Connector Shape: angular
- Number of pins: 3
-
Switch-on point [°C]: 95,
102 -
Shut-off Point [°C]: 85,
92 - Number of switch stages: 2
-
Thread Size: M22 x 1,
5 - Spanner Size: 29
- Supplementary Article/Info 2: with seal ring
- Housing Colour: black
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: MAX
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 90
-
Thread Size: M22x1,
5 - Colour: blue
- Number of pins: 2
- Connector Shape: angular
- Manufacturer: DELLO AUTOMEGA
- Number of pins: 3
- Switch Point [°C]: 120
- Colour: grey
- Manufacturer: JP GROUP
- Lisainfo: Sender for water temperature gauge 3 pins
- Additional information: Sender for water temperature gauge 3 pins
-
Thread Size: M 22 x 1,
5 - Number of pins: 2
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 90
- Connector Shape: angular
- Spanner Size: 29
- Supplementary Article/Info 2: with seal ring
- Housing Colour: blue
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 3
- Number of connectors: 2
- Manufacturer: 3RG
- Colour Coding: blue
-
Switch Point [°C]: 95,
90 - for OE number: 893 959 481
- Number of pins: 2
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: MAX
- Colour: blue
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Construction Year to: 08.1994
-
Thread Size: M 22 x 1,
5 - Spanner Size: 29
- Number of pins: 2
- Plug Type: Blade Terminal
- Shut-off Point [°C]: 70
- Switch-on point [°C]: 75
- Supplementary Article/Info 2: with seal ring
- Name: W¤CZNIK WENTYLATORA VAG
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Sensor Type: NTC Sensor
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Number of connectors: 2
- Colour Coding: green
- Weight [kg]: 0.02
- Name: SW 30 91 8666
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: rectangular
- Number of pins: 2
- for OE number: 025906041A
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- for OE number: 811959481
- Spanner Size: 29
- Manufacturer: KAMOKA
- Thread Size: M10 x 1
- Spanner Size: 14
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 1
- Colour Coding: blue
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connecting thread: M10 x 1
- Manufacturer: ERA
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year to: 08.1994
-
Thread Size: M 22 x 1,
5 - Spanner Size: 29
- Plug Type: Blade Terminal
- Number of pins: 2
- Switch-on point [°C]: 85
- Shut-off Point [°C]: 80
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 08.1994
-
Thread Size: M 22 x 1,
5 - Number of pins: 2
- Switch-on point [°C]: 80
- Shut-off Point [°C]: 75
- Plug Type: Blade Terminal
- Supplementary Article/Info 2: with seal ring
- Name: W¤CZNIK WENTYLATORA VAG
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: 1Z
- Number of pins: 1
- Housing Colour: blue
- Thread Size: M10x1
- Spanner Size: 13
- Corresponds to the original part in colour: blue
-
Name: ANDUR,
OLITEMPERATUUR - Manufacturer: EPS
- Construction Year to: 08.1994
-
Thread Size: M 22 x 1,
5 - Number of pins: 2
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 90
- Plug Type: Blade Terminal
- Spanner Size: 29
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 2
- Colour: black
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thread Size: M10x1.0
- Manufacturer: VERNET
- Diameter [mm]: 26
- Length [mm]: 35
- Supplementary Article/Info 2: with seal ring
- for OE number: 251 919 501 D
- Housing Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of connectors: 2
- Colour: blue
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: rectangular
- Number of pins: 2
- Socket colour: black
- for OE number: 251919501A
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- for OE number: A0015403045
- Colour: grey
- Spanner Size: 29
- Manufacturer: KAMOKA
- Connector Shape: angular
-
Thread Size: M 22 x 1,
5 - Number of pins: 3
- Number of switch stages: 2
-
Switch-on point [°C]: 95,
102 -
Shut-off Point [°C]: 85,
92 - Spanner Size: 29
- Supplementary Article/Info 2: with seal ring
- Housing Colour: black
- Name: W¤CZNIK WENTYLATORA VAG
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Diameter [mm]: 20
- Number of pins: 2
- Manufacturer: ERA
- Number of connectors: 2
- Colour Coding: green
- Weight [kg]: 0.02
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: 1Z
- Number of pins: 2
- Colour: blue
- Manufacturer: FACET
- Number of pins: 3
-
Switch-on point [°C]: 95,
102 -
Shut-off Point [°C]: 84,
91 - Manufacturer: JP GROUP
-
Lisainfo: Thermo switch for fan 95-
84 C/ 102- 91 C, 3 pins -
Additional information: Thermo switch for fan 95-
84 C/ 102- 91 C, 3 pins
- Connector Shape: round
- Colour Coding: grey
- Number of pins: 3
- Sensor Type: NTC Sensor
- Switch Point [°C]: 120
- Fitted Diameter [mm]: 20
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Connector Shape: angular
-
Thread Size: M 22 x 1,
5 - Number of pins: 3
- Spanner Size: 29
-
Switch-on point [°C]: 85,
93 -
Shut-off Point [°C]: 80,
88 - Number of switch stages: 2
- Supplementary Article/Info 2: with seal ring
- Housing Colour: black
- Name: W¤CZNIK WENTYLATORA VAG
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M 22 x 1,
5 - Number of pins: 3
- Connector Shape: angular
-
Switch-on point [°C]: 95,
102 -
Shut-off Point [°C]: 84,
91 - Spanner Size: 29
- Number of switch stages: 2
- Supplementary Article/Info 2: with seal ring
- Housing Colour: black
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Connector Shape: rectangular
- Material: Brass
- Number of pins: 2
- Plug Type: Male
- Sensor Type: NTC Sensor
- Spanner Size: 20 mm
- Thread Size: 0
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Spanner Size: 29
- Colour Coding: grey
- Supplementary Article/Info 2: with seal ring
- for OE number: 191 959 481 C
- Number of pins: 3
-
Thread Size: M22x1,
5 -
Switch Point [°C]: 95,
102 -
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: MAX
-
Lisainfo: 21-
0155 -
Additional information: 21-
0155
- Length [mm]: 37
- Supplementary Article/Info 2: with seal ring
- for OE number: 025 906 041 A
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour Coding: blue
- Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: 1Z
- Number of pins: 2
- Colour: black
- Name: EP 1.830.086
- Manufacturer: EPS
- Engine Code: 1Z
- Number of pins: 2
- Colour: black
- Manufacturer: FACET
- Length [mm]: 29
-
Thread Size: M22x1,
5 -
Switch Point [°C]: 70,
75 -
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Switch point from [°C]: 75
- Switch point to [°C]: 70
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: grey
- Number of pins: 3
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 3825
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: 1Z
- Number of pins: 2
- Colour: blue
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Mounting Type: Plugged
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 322 -
Supplementary Article/Supplementary Info: with gasket/
seal - Temperature range from [°C]: 25
- Temperature range to [°C]: +80
- Colour: blue
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
- Corresponds to the original part in colour: blue
- Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 3
- Temperature range to [°C]: 125
- Manufacturer: ERA
- Operating temperature from [°C]: 95
- Operating temperature to [°C]: 90
- Thread Size: M22x1.5
-
Sensor Type: Open-
style sensor -
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: VER
- Number of pins: 2
- Switch point from [°C]: 95
- Switch point to [°C]: 90
- Socket colour: blue
- Manufacturer: FAE
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: 1Z
- Number of pins: 2
- Temperature range from [°C]: 95
- Temperature range to [°C]: 90
-
Thread Size: M22x1,
5 - Spanner Size: 29
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: EPS
- Number of connectors: 2
- Colour Coding: blue
-
Switch Point [°C]: 95,
90 - Weight [kg]: 0.035
- Supplementary Article/Info 2: with seal ring
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Connector Shape: oval
- Socket colour: black
-
Shut-off Point [°C]: 95,
92 -
Switch Point [°C]: 85,
102 -
Thread Size: M22x1,
5 mm - Spanner Size: 29 mm
- for OE number: 6U0959481A
- Manufacturer: MEAT & DORIA
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: round
- Number of pins: 3
- Temperature range [°C]: 120
- for OE number: 053919501A
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
-
Operating temperature from [°C]: 95,
102 -
Operating temperature to [°C]: 84,
91 - Thread Size: M22x1.5
-
Sensor Type: Open-
style sensor -
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: VER
-
External Thread Size: M22 x 1,
5 - Spanner Size: 29
- Number of connectors: 3
- Colour Coding: grey
-
Temperature range from [°C]: 95,
102 -
Temperature range to [°C]: 84,
92 - Weight [kg]: 0.061
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with Temperature Switch
- Colour: grey
- Number of pins: 3
- Manufacturer: MEYLE
- Lisainfo: 1009190010
- Additional information: 1009190010
- Switch Point [°C]: 84
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity: 1
- General Information: Coolant temperature sensor
- Manufacturer: VIKA
-
Thread Size: 22x1,
5 - Number of pins: 3
- Manufacturer: FAE
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Model Year to: 1993
-
Vehicle Identification Number (VIN) from: 8C-
N- 000 001 -
Vehicle Identification Number (VIN) to: 8C-
N- 300 000 - Operating voltage [V]: 12
-
Switch point from [°C]: 91,
84 -
Switch point to [°C]: 102,
95 - Spanner Size: 29
- Supplementary Article/Info 2: with seal ring
- Colour: black
-
Thread Size: M22 x 1,
5 - Number of pins: 3
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: MEY
-
Thread Size: M22x1,
5 - Switch: for double thermal switch
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 3
- Climate Zones: for hot climate zones
- Switch point from [°C]: 102
- Switch point to [°C]: 85
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M22 x 1,
5 - Spanner Size: 29
- Number of pins: 2
- Switch point from [°C]: 95
- Switch point to [°C]: 90
- Manufacturer: ERA
- Number of pins: 3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 893959481
- Thread Size: M22x1.5
- Number of pins: 2
- Tightening Torque [Nm]: 35
-
Supplementary Article/Supplementary Info: with gasket/
seal - Switch-on point [°C]: 95
- Shut-off Point [°C]: 90
- Packaging width [cm]: 3.3
- Packaging length [cm]: 3.5
- Net Weight [g]: 55
- Packaging height [cm]: 7.2
- Manufacturer: MAHLE TERMOSTATY
General Information: SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
- Engine Code: 1Z
- Vehicle Equipment: for vehicles with air conditioning
- Warn Temperature [°C]: 110
- Thread Size: M10x1
- Spanner Size: 22
- Name: EP 1.840.085
- Manufacturer: EPS
- Engine Code: 1Z
- Number of pins: 3
-
Thread Size: M22x1,
5 - Spanner Size: 29
- Name: EP 1.850.635
- Manufacturer: EPS
-
Thread Size: M22x1,
5 -
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Switch point from [°C]: 98
- Switch point to [°C]: 93
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thread Size: M10 x 1
- Temperature range to [°C]: 110
- Manufacturer: ERA
- Opening Temperature [°C]: 120
- Number of pins: 3
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 191959481A
- Thread Size: M22x1.5
- Number of pins: 3
- Tightening Torque [Nm]: 50
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Switch-on point [°C]: 102,
95 -
Shut-off Point [°C]: 84,
91 - Packaging width [cm]: 3.5
- Packaging length [cm]: 3.7
- Net Weight [g]: 62
- Packaging height [cm]: 7.2
- Name: MH TSW31
- Manufacturer: MAHLE
- Observe technical data:
- Plug housing design: Plug sleeve housing
-
Manufacturer Restriction: Alfa Romeo,
Fiat, VAG - Number of pins: 2
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur
- Construction Year from: 08.1992
- Construction Year to: 07.1995
- Switch point to [°C]: 84
- Shut-off Point [°C]: 91
- Switch point from [°C]: 95
- Switch Point [°C]: 102
- Spanner Size: 29
- Manufacturer: VALEO
- Engine Code: 1Z
- Number of pins: 3
- Colour: grey
- Warn Temperature [°C]: 125
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Number of connectors: 3
- Colour: grey
- Switch Point [°C]: 120
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 3
- Colour: grey
- Switch Point [°C]: 120
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 7608
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with air conditioning
- Construction Year from: 01.1994
- Colour: brown
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
for OE number: 053919501A
- Construction Year from: 01.1994
- Switch Point [°C]: 118
- Colour: brown
- Number of pins: 3
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: METZGER
- Construction Year from: 01.1994
- Height [mm]: 65.4
- Switch Point [°C]: 118
- Colour: brown
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 3
- Switch point from [°C]: 118
- Switch point to [°C]: 113
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks