Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Mounting Type: Rubber Mount
- Fitting Position: Front
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Lower,
Rear -
Material: Rubber/
Metal - Length [mm]: 42
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 38
- Manufacturer: MERTZ
- Vehicle Identification Number (VIN) to: 8CP053245
-
Fitting Position: Left Front,
Right Front -
Mounting Type: Rubber-
Metal Mount - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount,
engine support, front -
Additional information: Rubber mount,
engine support, front
- Construction Year to: 12.1993
-
Vehicle Identification Number (VIN) from: 8C-
N- 000001 -
Vehicle Identification Number (VIN) to: 8C-
P- 053245 - Inner Diameter [mm]: 10
-
Material: Rubber/
Metal - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount -
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
- for OE number: 211261325B
- Fitting Position: Front
- Weight [g]: 18
- Name: IM 30723
- Manufacturer: ORIGINAL IMPERIUM
- Diameter [mm]: 63
- Fitting Position: Front
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front
- Length [mm]: 46
- Required quantity: 2
- Material: Rubber
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 68
- Weight [g]: 88
- Name: IM 2084
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.11
-
Name: DY 71-
24070 - Manufacturer: DYS
- Construction Year from: 01.1993
- Vehicle Identification Number (VIN) from: 8CP053246
- Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12
-
Lisainfo: Rubber mount,
engine support, front -
Additional information: Rubber mount,
engine support, front
- Construction Year to: 12.1993
-
Vehicle Identification Number (VIN) to: 8C-
P- 053 245, 8C- P- 020 000 -
Number of Cylinders: 4,
5 - Block Separation:
- Construction Year from: 01.1993
-
Vehicle Identification Number (VIN) from: 81-
G- 060 581 - Quantity per packing unit: 5
- Diameter [mm]: 46
- Height [mm]: 42
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 01.1993
-
Vehicle Identification Number (VIN) from: 8C-
P- 053246 - Transmission Type: Automatic Transmission
- Length [mm]: 42
-
Material: Rubber/
Metal - Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 38
- Inner Diameter [mm]: 12
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
- Transmission Type: Automatic Transmission
-
Vehicle Identification Number (VIN) from: 8C-
N- 000 001, 8C- P- 053 246, 8C- N- 190 001 - Fitting Position: Front
-
Vehicle Identification Number (VIN) to: 8C-
N- 300 000 -
Mounting Type: Rubber-
Metal Mount - Thread Size: M12
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 39
- Width [mm]: 46
- Manufacturer: DELLO AUTOMEGA
- for OE number: 811199415A
- Fitting Position: Front
- Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 159
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 39
- Length [mm]: 46
- Name: IM 30719
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Left Front,
Right Front -
Mounting Type: Rubber-
Metal Mount - Manufacturer: BGA
- Construction Year to: 12.1993
-
Vehicle Identification Number (VIN) to: ******8C*P*053245,
******8C*P*020000 -
Number of Cylinders: 4,
5 - Block Separation:
- Construction Year from: 01.1993
- Vehicle Identification Number (VIN) from: ******81*G*060581
- Length [mm]: 42
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 38
-
Material: Rubber/
Metal - Fitting Position: Rear
- Mounting Type: Hydro Mount
- Weight [kg]: 0.142
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- for OE number: 8A0 199 415 B
- Manufacturer: GSP
- Construction Year to: 12.1993
-
Vehicle Identification Number (VIN) to: ******8C*P*053245,
******8C*P*020000 -
Number of Cylinders: 4,
5 - Block Separation:
- Construction Year from: 01.1993
- Vehicle Identification Number (VIN) from: ******81*G*060581
- Length [mm]: 42
- Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 38.3
-
Material: Rubber/
Metal - Fitting Position: Rear
- Mounting Type: Hydro Mount
- Weight [kg]: 0.142
- Name: SW 30 75 0004
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.1993
- Vehicle Identification Number (VIN) from: ******8C*N*000001
- Vehicle Identification Number (VIN) to: ******8C*P*053245
- Inner Diameter [mm]: 10
-
Material: Rubber/
Metal - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.152
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 01.1993
- Vehicle Identification Number (VIN) from: ******8C*P*053246
- Transmission Type: Automatic Transmission
- Length [mm]: 42
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 38
-
Material: Rubber/
Metal - Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.125
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
- Additional information: F10115
- Lisainfo: F10115
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.1993
- Vehicle Identification Number (VIN) from: ******8C*N*000001
- Vehicle Identification Number (VIN) to: ******8C*P*053245
- Inner Diameter [mm]: 10
-
Material: Rubber/
Metal - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.152
- Name: SW 30 75 0005
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) from: ******8C*P*053246
- Transmission Type: Manual Transmission
- Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.05
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear
- Required quantity: 2
- Weight [g]: 156
- Name: IM 30759
- Manufacturer: ORIGINAL IMPERIUM
- Vehicle Identification Number (VIN) from: ******8C*P*053246
- Transmission Type: Manual Transmission
- Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.05
- Name: SW 32 13 0001
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 01.1993
- Vehicle Identification Number (VIN) from: ******8C*P*050246
- Thickness [mm]: 46
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 39
-
Material: Rubber/
Metal - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.14
- Observe service information:
-
Name: KINNITUS,
SILLATALA - Manufacturer: FEB
- Additional information: FE07179
- Lisainfo: FE07179
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front,
both sides - Thread Size: M12
- for OE number: 8A0 199 415 B
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Right Front
- Manufacturer: MERTZ
- Transmission Type: Automatic Transmission
- Fitting Position: Right
- Mounting Type: Hydro Mount
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
- Transmission Type: Manual Transmission
- Fitting Position: Left
- Mounting Type: Hydro Mount
-
Thread Size: M10x1,
5 -
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
-
External Thread [mm]: M10x1,
5 - Fitting Position: Left Front
- for OE number: 8A0 199 379 E
- Manufacturer: MERTZ
- Transmission Type: Manual Transmission
- Fitting Position: Right
- Mounting Type: Hydro Mount
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
- Mounting Type: Hydro Mount
- Fitting Position: Right
- Manufacturer: KAMOKA
- Transmission Type: Automatic Transmission
- Mounting Type: Hydro Mount
- Fitting Position: Left
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission Type: Manual Transmission
- Fitting Position: Left Front
- Mounting Type: Hydro Mount
-
Lisainfo: Rubber mount,
engine support, left -
Additional information: Rubber mount,
engine support, left
- Fitting Position: Right Front
- Transmission Type: Manual Transmission
-
Mounting Type: Rubber-
Metal Mount - Colour Coding: yellow
- Manufacturer: DELLO AUTOMEGA
- Transmission Type: Manual Transmission
- Fitting Position: Left Front
- Mounting Type: Hydro Mount
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Right Front
- Mounting Type: Hydro Mount
- Transmission Type: Manual Transmission
-
Lisainfo: Rubber mount,
engine support, right -
Additional information: Rubber mount,
engine support, right
- Transmission Type: Manual Transmission
- Fitting Position: Left
- Width [mm]: 108
- Height [mm]: 143
-
Material: Aluminium,
Rubber/ Metal - Mounting Type: Hydro Mount
- Guarantee: 3 years guarantee
- Weight [kg]: 1.05
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV
- Mounting Type: Hydro Mount
- Fitting Position: Left
- Manufacturer: KAMOKA
- Transmission Type: Manual Transmission
- Mounting Type: Hydro Mount
- Fitting Position: Left
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission Type: Manual Transmission
- Mounting Type: Hydro Mount
- Fitting Position: Right
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission Type: Manual Transmission
- Fitting Position: Left Front
- Mounting Type: Hydro Mount
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MEY
- Lisainfo: 1001990046
- Additional information: 1001990046
- Transmission Type: Manual Transmission
-
External Thread Size: M10 x 1,
5 - Fitting Position: Left
- Mounting Type: Hydro Mount
- Weight [kg]: 1.034
- for OE number: 8A0 199 379 E
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Automatic Transmission
- Fitting Position: Left
- Mounting Type: Hydro Mount
- Weight [kg]: 0.88
- for OE number: 8A0 199 381 A
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Automatic Transmission
- Fitting Position: Right
- Mounting Type: Hydro Mount
- Weight [kg]: 1.02
- for OE number: 8A0 199 382 B
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Automatic Transmission
- Fitting Position: Right
- Weight [kg]: 1.11
- Mounting Type: Hydro Mount
- Manufacturer: CORTECO
-
Fitting Position: both sides,
Left Front, Right Front, Front - Required quantity: 1
- Mounting Type: Hydro Mount
-
Weight [g]: 1,
038 - Colour Coding: green
- Name: IM 30731
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: engine sided
-
Mounting Type: Rubber-
Metal Mount, Hydro Mount - Weight [kg]: 0.95
-
Name: DY 71-
22073 - Manufacturer: DYS
- Fitting Position: Left Rear
- Transmission Type: Manual Transmission
- Mounting Type: Hydro Mount
- Manufacturer: OPTIMAL ZAWIESZENIE
- Transmission Type: Manual Transmission
- Fitting Position: Right Front
- Mounting Type: Hydro Mount
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MEY
- Lisainfo: 1001990092
- Additional information: 1001990092
- Transmission Type: Manual Transmission
- Fitting Position: Right
- Mounting Type: Hydro Mount
- Weight [kg]: 1.06
- for OE number: 8A0 199 382 A
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Manual Transmission
- Fitting Position: Right
- Weight [kg]: 1.1
- Mounting Type: Hydro Mount
- Manufacturer: CORTECO
- Name: COC 80000216
- Fitting Position: Right Front
- Required quantity: 1
- Mounting Type: Hydro Mount
-
Weight [g]: 1,
212 - Colour Coding: yellow
- Name: IM 30728
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Right Front
-
Mounting Type: Rubber-
Metal Mount, Hydro Mount - Weight [kg]: 1
-
Name: DY 71-
22071 - Manufacturer: DYS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks