Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Transmission Type: 5-
Speed Manual Transmission - Vehicle Equipment: for vehicles with manual transmission
- Outer Diameter [mm]: 24
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Transmission Type: 5-
Speed Manual Transmission - Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Height [mm]: 6
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 3
- Inner Diameter [mm]: 11.5
- Outer Diameter [mm]: 17.5
-
Material: FKM
(fluorocarbon rubber) - Shape: O Shape
- Weight [kg]: 0.001
-
Name: Tihend,
kigukast - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 10
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 65
- General Information: Oil seal for differential shaft; 50x65x10mm
- Manufacturer: VIKA
- Fitting Position: transmission sided
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: Oil seal for transmission; for first shaft; NBR
- Manufacturer: VIKA
- Fitting Position: Front
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: FPM
(fluoride rubber) - for OE number: 026103085D
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
-
Transmission Code: BAA,
CPC - Height 1 [mm]: 6
- Outer Diameter 1 [mm]: 24
- Inner Diameter 1 [mm]: 16
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Code: BAA,
CLF - Block Separation:
- Fitting Position: Drive Axle
- Height 1 [mm]: 8
- Outer Diameter 1 [mm]: 60
- Inner Diameter 1 [mm]: 45
-
Material: ACM
(Polyacrylate) - Swirl Type: Alternating Twist
- Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
JAOTUSKAST - Manufacturer: COT
- Fitting Position: Inlet
-
Transmission Code: BAA,
CPC - Height 1 [mm]: 8
- Outer Diameter 1 [mm]: 40
- Inner Diameter 1 [mm]: 25
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
-
Transmission Type: 5-
Speed Manual Transmission - Height 1 [mm]: 6.5
- Outer Diameter 1 [mm]: 24
- Inner Diameter 1 [mm]: 16
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: CORTECO USZCZELNIACZE
- Inner Diameter [mm]: 24.9
- Outer Diameter [mm]: 40
- Height [mm]: 8
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
-
Name: Volli rongastihend,
manuaalk.kasti peavoll - Manufacturer: ELR
-
Fitting Position: Outlet,
Rear Axle, Front Axle - Shape: O Shape
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 45
- Thickness [mm]: 6
- Sealing Ring Diameter [mm]: 60
- Outer Diameter [mm]: 40
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front
- Thickness [mm]: 6
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Name: SIMER. WYBIERAKA SKRZYNI VW 16X24X6
- Manufacturer: VAI
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Housing material: Sheet Steel
-
Supplementary Article/Info 2: with shaft seal,
with seal ring -
Name: Juhthlss,
sidur - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 2
- Quantity: 2
- Quantity Unit: Kit
- General Information: Oil seal for differential shaft; 2 pcs
- Manufacturer: BORSEHUNG
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks