• Operating Mode: Electric
• Vehicle Equipment: for vehicles without xenon light
• Version: AL/BOSCH/MAGNETI MA.
• Lisainfo: Motor for headlamp levelling
• Additional information: Motor for headlamp levelling

• Styling: for dual headlight
• for PR number: 8BD
• Fitting Position: both sides
• Operating Mode: Electric
• Number of pins: 3
• Housing material: Plastic
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles with headlight levelling, for vehicles without xenon light General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Light Design: Halogen
• for PR number: 8BD
• Operating Mode: Electric
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV936

• for PR number: 8BD
• Light Design: Halogen
• Number of circuits: 3
• Plug Type: Butt Joint
• Cable Length [mm]: 250
• Wire cross-section [mm²]: 0,5
• Manufacturer: METZGER

• Light Design: Halogen
• Operating Mode: Electric
• Manufacturer Restriction: System BOSCH
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for PR number: 8BD
• Light Design: Halogen
• Operating Mode: Electric
• Alternative Repair Kit: 2324178
• Manufacturer: METZGER

• not for PR number: 1BL
• Spring Type: for vehicles without air suspension
• Fitting Position: Rear Axle Left
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• Fitting Position: Rear Axle Left
• for OE number: 8K0 941 309 F
• Manufacturer: KAMOKA

• Fitting Position: Front, Left
• Number of pins: 4
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Fabrication Number: ECX-AU-035
• paired article number: ECX-AU-039
• Manufacturer: NTY
• Name: NTY ECX-AU-035

• Fitting Position: Rear Axle Left
• Required quantity: 1
• Fabrication Number: ECX-AU-009
• Manufacturer: NTY
• Name: NTY ECX-AU-009

• Fitting Position: Front, Left
• Required quantity: 1
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Number of pins: 4
• Fabrication Number: ECX-AU-019
• Manufacturer: NTY
• Name: NTY ECX-AU-019

Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Manufacturer: KAMOKA

• for PR number: 1BL
• Supplementary Article/Info 2: with coupling rod, with holding frame
• Fitting Position: Front Axle Right
• Required quantity: 1
• paired article number: 27-1996
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Fitting Position: Right Rear
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• for PR number: 1BL
• Supplementary Article/Info 2: with coupling rod, with holding frame
• Fitting Position: Rear Axle Left
• Required quantity: 1
• paired article number: 27-1997
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• for PR number: 1BL
• Fitting Position: Rear Axle Right
• Spring Type: for vehicles with air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Number of pins: 4
• Housing Colour: black
• Connector Shape: D Shape
• Housing material: Polyamid 6, GRP (Glass fibre Reinforced Plastic)
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Gold-plated
• Socket Width [mm]: 1.6
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• for PR number: 8Q5, 8Q3
• not for PR number: 1BL
• Fitting Position: Front Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Manufacturer: MAX

Name: Andur, ksenoonvalgusti (tulede ulatuse reguleerimine)

• for PR number: 1BL
• Fitting Position: Front Axle, Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Number of pins: 4
• Supplementary Article/Supplementary Info: with holder
• Supplementary Article/Info 2: with coupling rod
• Name: Andur, seadeelement- tulede ulatuse reguleerimine
• Manufacturer: MAX

• Fitting Position: Rear Axle Right
• Fabrication Number: ECX-AU-040
• paired article number: ECX-AU-038
• Manufacturer: NTY
• Name: NTY ECX-AU-040

• Fitting Position: Front Axle Right
• Fabrication Number: ECX-AU-039
• paired article number: ECX-AU-035
• Manufacturer: NTY
• Name: NTY ECX-AU-039

• Supplementary Article/Info 2: with coupling rod
• Fitting Position: Rear Axle Left
• Fabrication Number: ECX-AU-038
• paired article number: ECX-AU-040
• Manufacturer: NTY
• Name: NTY ECX-AU-038

• Fitting Position: Rear Axle, Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• Weight [kg]: 0.22
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV433

• for PR number: 1BL
• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle Left
• Housing Colour: black
• Number of pins: 4
• Housing material: GRP (Glass fibre Reinforced Plastic), Plastic
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Left
• for OE number: 8K0 941 309 D
• Manufacturer: KAMOKA

• Spring Type: for vehicles without air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

Housing material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic), Plastic General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Left
• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• Weight [kg]: 0.21
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV718
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Right
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.21
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV722

• for PR number: 1BL
• Suspension: for vehicles with electronic suspension control
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle, Left
• Housing Colour: black
• Number of pins: 4
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 1BL
• Fitting Position: Front Axle, Right
• Number of pins: 4
• Guarantee: 3 years guarantee
• paired article number: 17SKV601
• Weight [kg]: 0.19
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV713

Supplementary Article/Info 2: with coupling rod, with holder, alternator regulator

• for PR number: 1BA, 1BD, 1BE, 1BR, 1BV
• Spring Type: for vehicles without air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Housing material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left
• Number of pins: 4
• Vehicle Equipment: for vehicles with Xenon light
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with holder
• Number of pins: 4
• Supplementary Article/Info 2: with coupling rod
• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV370

• Fitting Position: Left Rear
• General Information: level sensor with poles; rear left
• Manufacturer: VIKA

• for PR number: 1BL
• Suspension: for vehicles with electronic suspension control
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle, Right
• Housing Colour: black
• Number of pins: 4
• Sensor Type: Lever Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with holder
• Supplementary Article/Info 2: with coupling rod
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Spring Type: for vehicles without air suspension
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Front Axle
• Housing Colour: black
• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: Lever Sensor
• Supplementary Article/Supplementary Info: with holder, with rod assembly
• Supplementary Article/Info 2: with coupling rod
• Mounting Type: Pre-assembled
• Manufacturer: ENERGY

Housing material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic), Plastic

• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV369
• Manufacturer: ESEN SKV

• Fitting Position: Left Front
• General Information: level sensor with poles; front left
• Manufacturer: VIKA

• Fitting Position: Right Front
• General Information: level sensor with poles; front right
• Manufacturer: VIKA

• Fitting Position: Left Front
• General Information: level sensor with poles; front left
• Manufacturer: VIKA

• Fitting Position: Front Axle, Left
• Number of pins: 4
• Guarantee: 3 years guarantee
• paired article number: 17SKV713
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV601

Supplementary Article/Info 2: with coupling rod, with holder, alternator regulator

• Fitting Position: Right Rear
• General Information: level sensor with poles; rear right
• Manufacturer: VIKA

• Fitting Position: Left Front
• Number of connectors: 4
• Connector Shape: D Shape
• Manufacturer: ERA

• Fitting Position: Front Axle Left
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for PR number: 1BA, 1BD, 1BR, 1BV, 1BE, 8Q3, 8Q5
• Fitting Position: Rear Axle Left
• Sensor Type: Lever Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with holding frame, with coupling rod
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Spring Type: for vehicles without air suspension
• Fitting Position: Rear Axle Left
• Supplementary Article/Supplementary Info: with rod assembly
• Supplementary Article/Info 2: with holding frame
• Sensor Type: Lever Sensor
• Required quantity: 1
• Manufacturer: METZGER

• for PR number: 1BL
• Fitting Position: Front Axle Right
• Supplementary Article/Supplementary Info: with rod assembly
• Supplementary Article/Info 2: with holding frame
• Sensor Type: Lever Sensor
• Required quantity: 1
• paired article number: 0901425
• Manufacturer: METZGER

• for PR number: 1BL
• Fitting Position: Rear Axle Right
• Supplementary Article/Supplementary Info: with rod assembly
• Supplementary Article/Info 2: with holding frame
• Sensor Type: Lever Sensor
• Required quantity: 1
• Number of pins: 4
• paired article number: 0901423
• Manufacturer: METZGER