• Fitting Position: Exhaust Turbocharger
• Number of mounting bores: 2
• Manufacturer: ELRING

• Fitting Position: Upper
• Material: MVQ (silicone rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: engine sided
• Name: Tihend, karterituulutus
• Manufacturer: ELR

• Üldine informatsioon: seal for oil separator
• Manufacturer: VIKA

• Installatsiooni pool: Vändaraam
• Seerianumber: SEP-AU-001
• Manufacturer: NTY
• Name: NTY SEP-AU-001

• General Information: non-return valve
• Manufacturer: BORSEHUNG

• Name: Tihend, karterituulutus
• Manufacturer: DRM
• Additional information: DRM0909
• Lisainfo: DRM0909

Lühiinformatsioon: Always compare old and new part (in particular OE No.)

• Fitting Position: from cylinder head cover to oil separator
• Material: FPM (fluoride rubber)
• Name: Tihend, karterituulutus
• Manufacturer: ELR

• Pikkus (mm): 260
• Laius (mm): 100
• Kõrgus (mm): 35
• Kaal (kg): 0,041
• Siseläbimõõt [mm]: 19,3
• Manufacturer: METALCAUCHO

• Construction Year from: 06.2009
• Engine Code: CDHA
• Jahutustorustik: Karteri õhutusvoolik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 06J103221
• Weight [g]: 67
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

• Engine Code: CDHA
• Construction Year from: 06.2009
• Width [mm]: 100
• Height [mm]: 35
• Inner Diameter [mm]: 19.3
• Hose Length [mm]: 260
• Supplementary Article/Info 2: with quick couplers
• Fitting Position: Front
• Weight [kg]: 0.041
• for OE number: 06J 103 221
• Observe service information:
• Name: Voolik,Karterituulutus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.2009
• Engine Code: CDHA
• Weight [kg]: 0.06
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Crankcase
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Seal Material: FPM (fluoride rubber)
• Supplementary Article/Supplementary Info: with seal
• Name: Olieraldaja, karterituulutus
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic
• Supplementary Article/Info 2: without bolts
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• OE-numbri jaoks: 06H 103 495 AE
• Installatsiooni pool: Silindripea
• Pikkus (mm): 215
• Laius (mm): 205
• Kõrgus (mm): 90
• Rakendustüüp: juhitav survega
• Klapitüüp: Õhutusklapp, Membraanklapp
• Piirangutega toode/piirangu info: koos tihendiga
• Hooldusinfot jälgida:
• Korpuse materjal: Polyamid 6.6
• Materjal tihend: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Seerianumber: SEP-VW-007
• Manufacturer: NTY
• Name: NTY SEP-VW-007

• for OE number: 06H 103 464 L
• Name: Olieraldaja, karterituulutus
• Manufacturer: TRU

• Material: Plastic
• Supplementary Article/Info 2: without bolts/screws
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Production date to: 31.03.2012
• Fitting Position: Cylinder Head Cover, Upper
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Operating Mode: Pressure Controlled
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Production date to: 31.03.2012
• Installatsiooni pool: Plokikaas, üleval
• Korpusetüüp: Sünteetikakorpus
• Korpuse materjal: GFK (klaaskiuga tugevdatud plastmass), Polyamid 6
• Rakendustüüp: juhitav survega
• Piirangutega toode/piirangu info: koos tihendiga
• Manufacturer: ENERGY

• Supplementary Article/Supplementary Info: with hose
• Observe service information:
• Name: OLIERALDAJA, KARTERITUULUTUS
• Manufacturer: MAX

• Seerianumber: SEP-VW-015
• Piirangutega toode/piirangu info: koos voolikuga
• Manufacturer: NTY
• Name: NTY SEP-VW-015

• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Kaal (kg): 0,19
• Name: CE 31SKV089
• Manufacturer: ESEN SKV

• Production date from: 31.03.2012
• Fitting Position: Cylinder Head Cover, Upper
• Valve type: Breather Valve
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Housing Type: Synthetic Material Housing
• Operating Mode: Pressure Controlled
• Supplementary Article/Supplementary Info: with seal
• Name: OLIERALDAJA, KARTERITUULUTUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 03.2012
• Manufacturer: JP GROUP
• Lisainfo: Oil Trap, crankcase breather
• Additional information: Oil Trap, crankcase breather

• for OE number: 6H 103 495 E
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Production date to: 31.03.2012
• Fitting Position: Left Rear
• Weight [kg]: 0.072
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Üldine informatsioon: oil separator; STO
• Manufacturer: VIKA

• Production date to: 31.03.2012
• Piirangutega toode/piirangu info: koos tihendiga
• Rakendustüüp: juhitav survega
• Installatsiooni pool: Silindripea
• alternatiivne remondikomplekt: 2385072, 2385148
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Manufacturer: ENERGY

• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Kaal (kg): 0,52
• Name: CE 31SKV085
• Manufacturer: ESEN SKV

• Installatsiooni pool: Silindripea
• Piirangutega toode/piirangu info: koos tihendiga
• Klapitüüp: Õhutusklapp
• Rakendustüüp: juhitav survega
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Laius 1 (mm): 138
• Kõrgus 1 (mm): 214
• Pikkus 1 [mm]: 106
• Kaal (g): 246
• Garantii: 3 aastat garantii
• OE-numbri jaoks: 06H 103 464 L
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Garantii: 3 aastat garantii
• Kaal (kg): 0,15
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ESEN SKV

• Engine Code: CDHA
• Manufacturer: JP GROUP
• Lisainfo: Oil Trap, crankcase breather
• Additional information: Oil Trap, crankcase breather

• Production date to: 31.03.2012
• Name: Olieraldaja, karterituulutus
• Manufacturer: DRM

• Kütuseliik: Bensiin
• tootekoodile: 06H 103 495 AE
• Laius 1 (mm): 163
• Kõrgus 1 (mm): 183
• Pikkus 1 [mm]: 188
• Kaal (g): 561
• Garantii: 3 aastat garantii
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• for OE number: 6H103213G
• Weight [g]: 162
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 21
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

• Construction Year to: 03.2012
• Colour: black
• Material: Plastic
• Weight [kg]: 0.425
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Additional information: FEB170406
• Lisainfo: FEB170406

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 31.03.2012
• Filter type: for oil mist separator
• Manufacturer: HENGST FILTER

• for OE number: 06H 103 495 AE
• Manufacturer: MEAT&DORIA

• Construction Year to: 03.2012
• Installatsiooni pool: üleval, Silindripea
• Rakendustüüp: juhitav survega
• Piirangutega toode/piirangu info: koos tihendiga
• Klapitüüp: Membraanklapp
• Soovituslik vahetusintervall (km): 60 000
• Soovituslik vahetusintervall (aastad): 3
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 03.2012
• Colour: black
• Material: Plastic
• Weight [kg]: 0.42
• Supplementary Article/Supplementary Info: with seal
• Name: Olieraldaja, karterituulutus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 03.2012
• Colour: black
• Material: Plastic
• Weight [kg]: 0.425
• Supplementary Article/Supplementary Info: with seal
• Observe service information:
• Name: SW 33 10 0269
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 31.03.2012
• Piirangutega toode/piirangu info: koos tihendiga
• Manufacturer: METZGER

• Length [mm]: 178.9
• Width [mm]: 94.6
• Thickness [mm]: 63.8
• Weight [kg]: 0.118
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piirangutega toode/piirangu info: koos tihendiga
• Installatsiooni pool: Mootoriplokk
• Manufacturer: METZGER

• Fitting Position: Cylinder Head
• Operating Mode: Pressure Controlled
• Supplementary Article/Supplementary Info: with seal
• Housing material: Polyamid 6.6
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 3
• Seal Material: FPM (fluoride rubber)
• Valve type: Breather Valve, Diaphragm Valve
• Observe service information:
• Weight [kg]: 0.241
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Production date from: 31.03.2012
• for OE number: 06H 103 495 AE
• Length [mm]: 215
• Height [mm]: 90
• Observe technical data:
• Recommended change interval [km]: 60,000
• Width [mm]: 205
• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Cylinder Head
• Recommended change interval [years]: 3
• Observe service information:
• Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Operating Mode: Pressure Controlled
• Valve type: Breather Valve, Diaphragm Valve
• Observe the vehicle manufacturer specifications:
• Housing material: Polyamid 6.6
• Weight [kg]: 0.554
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: oil and gas separator
• Manufacturer: BORSEHUNG