Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Colour Coding: grey
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Material: Rubber
- for OE number: 7198663
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Weight [kg]: 0.001
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for PR number: TW6,
TQ6 - Block Separation:
-
Siseläbimõõt [mm]: 5,
6 -
Välisläbimõõt [mm]: 9,
7 - Jämedus/Tugevus (mm): 2
- Värv: must
- Manufacturer: METZGER
- Colour Coding: grey
-
Fabrication Number: ECT-
VW- 000 - Manufacturer: NTY
-
Name: NTY ECT-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 95510612500
- Manufacturer: KAMOKA
-
Connector Shape: oval,
D Shape - Colour Coding: grey
- Sensor Type: NTC Sensor
- Number of pins: 2
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Ühenduste arv: 2
- Manufacturer: 3RG
- Quantity per packing unit: 3
- Ühenduste arv: 2
- Manufacturer: 3RG
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 2
- for OE number: 06A919501
- Supplementary Article/Info 2: with mounting parts
- Manufacturer: NRF
- Thread Size: 20 mm
- Number of pins: 2
- Manufacturer: VERNET
- Additional information: WS2607
- Lisainfo: WS2607
- Engine Code: CFKA
- Colour: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- Engine Code: CFKA
- Colour: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 - Name: EP 1.830.278
- Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Keermemõõt: M20
- Pistikkontaktide arv: 2
- Korpusevärv: hall
- Pistikukatte kuju: ovaalne
- Manufacturer: ERA
- Housing Colour: grey
- Number of pins: 2
- Spanner Size: 0
- Manufacturer: DELPHI
- Name: DE TS10278
- Version: 2
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: not have
- Thread Size: not have
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Pistikkontaktide arv: 2
- Värvimarkeering: hall
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Mounting Type: Plugged
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: with seal
- Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: black,
grey - Fitting Depth [mm]: 20
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PT009309331
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE ELEKTRYKA
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Weight [kg]: 0.02
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- tootekoodile: 06H 905 379
- Garantii: 3 aastat garantii
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks