• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-012
• Manufacturer: NTY

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Manual Transmission, Dual-Clutch Transmission

• Transmission Code: 7G-DKG
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 99
• Outer Diameter [mm]: 34
• SVHC: No SVHC present!
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAN

• Filter type: Spin-on Filter
• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 0AW
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with gasket/seal
• Fabrication Number: FSF-AU-004
• Transmission Code: DL501 / 0B5
• Filter type: Filter Insert
• Observe system fill quantity:
• Manufacturer: NTY
• Name: NTY FSF-AU-004

Transmission Type: 7-Speed Dual-Clutch Transmission, Automatic Transmission

• Alternatively:
• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.034
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 4-Speed Automatic Transmission
• Filter type: Screen Filter, Suction Filter
• Housing Type: Synthetic Material Housing
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: CVT automatic transmission (stepless)
• Transmission number from: 26058
• Filter type: Screen Filter, Suction Filter
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Clutch: for vehicles with double clutch
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Weight [kg]: 0.024
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Filter Insert
• Length [mm]: 207
• Outer Diameter [mm]: 61
• Weight [kg]: 0.305
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Width [mm]: 30
• Height [mm]: 30
• Guarantee: 3 years guarantee
• for OE number: 0B5 325 330 A
• Length [mm]: 100
• Weight [g]: 26
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Filter type: Filter Insert
• Diameter [mm]: 34
• Height [mm]: 99.3
• Inner Diameter 2 [mm]: 19
• Height 1 [mm]: 93
• Packaging height [cm]: 10.9
• Net Weight [g]: 25
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5.5
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN HX186D

Transmission Type: Automatic Transmission, 7-Speed Automatic Transmission

• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Filter Insert
• Length [mm]: 207
• Outer Diameter [mm]: 61
• Weight [kg]: 0.305
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Outer Diameter [mm]: 61
• Height [mm]: 207
• Manufacturer: HENGST FILTER

• Filter type: Filter Insert
• Diameter [mm]: 34
• Height [mm]: 99.3
• Inner Diameter 2 [mm]: 19
• Inner Diameter 3 [mm]: 18.75
• Height 1 [mm]: 93
• Packaging height [cm]: 10.9
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5.5
• Manufacturer: MAHLE KNECHT

Transmission Type: Automatic Transmission, 7-Speed Automatic Transmission

• Transmission Code: 0AW
• Supplementary Article/Supplementary Info: with gasket/seal
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Transmission Type: CVT automatic transmission (stepless)
• Weight [kg]: 0.471
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: CVT automatic transmission (stepless)
• Transmission number from: 26058
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with gasket/seal
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission ID: NDT/NDU
• Transmission Code: 021
• Width [mm]: 158
• Height [mm]: 215
• for OE number: 0AW 301 519 C S1
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Filter type: Filter Insert
• Diameter [mm]: 61
• Height [mm]: 207
• Inner Diameter 2 [mm]: 7
• Inner Diameter 3 [mm]: 13.7
• Transmission Type: CVT automatic transmission (stepless)
• Packaging height [cm]: 21.5
• Net Weight [g]: 304
• Packaging length [cm]: 9.5
• Packaging width [cm]: 9.5
• Manufacturer: MAHLE KNECHT

• Filter type: Filter Insert
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 214.5
• Inner Diameter 2 [mm]: 7
• Transmission Code: 0AW
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Soft Material Gasket
• Packaging width [cm]: 17.5
• Packaging length [cm]: 22.5
• Packaging height [cm]: 30
• Manufacturer: MAHLE KNECHT

Transmission Type: Automatic Transmission, CVT automatic transmission (stepless)

• Filter type: Filter Insert
• Diameter [mm]: 61
• Height [mm]: 207
• Inner Diameter 2 [mm]: 7
• Inner Diameter 3 [mm]: 13.7
• Transmission Type: CVT automatic transmission (stepless)
• Packaging height [cm]: 21.5
• Net Weight [g]: 304
• Packaging length [cm]: 9.5
• Packaging width [cm]: 9.5
• Name: KN HX155
• Manufacturer: KNECHT

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Filter type: Filter Insert
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 214.5
• Inner Diameter 2 [mm]: 7
• Transmission Code: 0AW
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Fibre Composite
• Packaging width [cm]: 17.5
• Packaging length [cm]: 22.5
• Packaging height [cm]: 30
• Net Weight [g]: 440
• Name: KN HX192D
• Manufacturer: KNECHT

Transmission Type: Automatic Transmission, CVT automatic transmission (stepless)

• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 0AW
• Filter type: Filter Insert
• Height [mm]: 210
• Length [mm]: 90
• Width [mm]: 13
• Manufacturer: PURFLUX

• Transmission ID: NDT/NDU
• Transmission Type: CVT automatic transmission (stepless)
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 215
• Weight [kg]: 0.376
• Supplementary Article/Info 2: with oil sump gasket
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: NDT/NDU
• Filter type: Screen Filter
• Transmission Type: CVT automatic transmission (stepless)
• Length [mm]: 285
• Width [mm]: 160
• Thickness [mm]: 220
• Weight [kg]: 0.405
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: DL501
• Width [mm]: 161
• Height [mm]: 92
• Supplementary Article/Supplementary Info: with gasket/seal
• Filter type: Filter Insert
• Manufacturer: KAMOKA

Transmission Type: Automatic Transmission, 7-Speed Dual-Clutch Transmission

• Transmission ID: NDS, NDT, NDU, NDV, PLP
• Model Year from: 2013
• Filter type: Filter Insert
• Transmission Code: 0AW
• Transmission Type: CVT automatic transmission (stepless)
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Transmission ID: NDT/NDU
• Filter type: Filter Insert
• Length [mm]: 281
• Width [mm]: 215
• Height [mm]: 158
• Manufacturer: HENGST FILTER

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CCL-AU-041
• Manufacturer: NTY

Lisainfo: /AUTOMATYCZNEJ SKRZYNI BIEG£W/AUDI A4 B8 2011-,A5 2007-,A6 C7 2010-,A7 2011-,Q5 2011-,PORSCHE MACAN 2014-/SKRZYNIA BIEG£W Z PODW£JNYM SPRZGœEM 7-BIEGOWA/ Additional information: /AUTOMATYCZNEJ SKRZYNI BIEG£W/AUDI A4 B8 2011-,A5 2007-,A6 C7 2010-,A7 2011-,Q5 2011-,PORSCHE MACAN 2014-/SKRZYNIA BIEG£W Z PODW£JNYM SPRZGœEM 7-BIEGOWA/

• Filter type: Screen Filter
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: JPA

• Filter type: Filter Insert, Spin-on Filter
• Supplementary Article/Supplementary Info: with oil filter housing
• Transmission Type: CVT automatic transmission (stepless)
• Housing Type: Synthetic Material Housing
• Transmission Code: 0AW
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Filter Insert
• Width [mm]: 161
• Height [mm]: 94.5
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Metal Elastomer Gasket
• Recommended change interval [km]: 60,000
• Packaging height [cm]: 5
• Packaging length [cm]: 38
• Packaging width [cm]: 45
• Manufacturer: MAHLE KNECHT

Transmission Type: Automatic Transmission, 7-Speed Dual-Clutch Transmission

• Transmission ID: NDT/NDU
• Transmission Type: CVT automatic transmission (stepless)
• Length [mm]: 281
• Width [mm]: 158
• Height [mm]: 215
• Weight [kg]: 0.376
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 4-Speed Automatic Transmission
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with gasket/seal
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Filter Insert
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Supplementary Info: with gasket/seal
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: for 7-speed automatic transmission, Dual-Clutch Transmission

• Filter type: Filter Insert
• Length [mm]: 197.5
• Width [mm]: 161
• Height [mm]: 94.5
• Inner Diameter 2 [mm]: 29
• Transmission Code: S-Tronic (DL501)
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Metal Elastomer Gasket
• Number of Holes: 15
• Recommended change interval [km]: 60,000
• Net Weight [g]: 372
• Packaging length [cm]: 38
• Packaging width [cm]: 45
• Packaging height [cm]: 5
• Name: KN HX185D
• Manufacturer: KNECHT

Transmission Type: Automatic Transmission, 7-Speed Dual-Clutch Transmission

• Transmission Type: for 7-speed dual-clutch transmission
• Transmission Code: 0B5
• Filter type: Filter Insert
• Height [mm]: 93
• Length [mm]: 198
• Width [mm]: 92
• Manufacturer: PURFLUX

• for OE number: 0AW 301 516 H
• Filter type: Spin-on Filter
• Manufacturer: TRUCKTEC

• Transmission Type: CVT automatic transmission (stepless)
• Transmission Code: 0AW, Boite 26058-->
• Filter type: Filter Insert
• Height [mm]: 216
• Length [mm]: 294
• Width [mm]: 162
• Manufacturer: PURFLUX

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Spin-on Filter
• Guarantee: 3 years guarantee
• Weight [kg]: 0.36
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 31SKV056

• Transmission Type: CVT automatic transmission (stepless)
• Supplementary Article/Supplementary Info: with gaskets/seals
• Transmission Code: 0AW
• Supplementary Article/Info 2: with bolts/screws
• Number of mounting bores: 3
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Model Year to: 2013
• Transmission ID: LHL;LZL;KSF, NUJ;NHL;NRW, PJW;PWZ;SKL
• Block Separation:
• Model Year from: 2013
• Transmission Code: 0B5, DL501
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Supplementary Article/Info 2: with seal ring
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MAX

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: DL501 / 0B5, PDK
• Supplementary Article/Supplementary Info: with gasket/seal
• Material: Rubber/Metal
• Manufacturer: METZGER

• General Information: oil pressure line
• Manufacturer: VIKA

• Transmission Code: 0AW
• Transmission Type: CVT automatic transmission (stepless)
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Supplementary Article/Supplementary Info: with gasket/seal
• Clutch: for vehicles with double clutch
• Transmission Code: S-Tronic (DL501)
• See accessories list for additionally required parts:
• Weight [kg]: 0.516
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• General Information: transmission filter repair kit
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 8K-CA200 000
• Block Separation:
• Vehicle Identification Number (VIN) from: 8K-D-000 001
• for PR number: 0AW, 0B5
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Fitting Position: Upper
• Forward- /Backflow: Supply Line
• Manufacturer: METZGER

Transmission Type: CVT automatic transmission (stepless), 7-Speed Dual-Clutch Transmission Transmission ID: NDS, NDT, NDU, NDV, PLP, NHL, NRW, NUJ, PJW, PWZ, SKL Cooling Hose: Oil Cooler Hoseline, from transmission oil cooler to transmission

• Vehicle Identification Number (VIN) to: 8K-CA200 000
• Block Separation:
• Vehicle Identification Number (VIN) from: 8K-D-000 001
• for PR number: 0AW, 0B5
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Cooling Hose: from transmission oil cooler to transmission
• Fitting Position: Lower
• Forward- /Backflow: Return Line
• Manufacturer: METZGER

Transmission Type: CVT automatic transmission (stepless), 7-Speed Dual-Clutch Transmission Transmission ID: NDS, NDT, NDU, NDV, PLP, NHL, NRW, NUJ, PJW, PWZ, SKL

• Fabrication Number: EAT-AU-003
• Supplementary Article/Supplementary Info: with accessories
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Quantity Unit: Set
• Transmission Code: DL501, 0B5
• Fitting Position: in transmission housing
• Manufacturer: NTY
• Name: NTY EAT-AU-003