Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Manufacturer: TOPRAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 235
- Core Width [mm]: 188
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 4 /
S 4 (B8) (07- ) S4 - 3.0 TFSI -
Additional information: AUDI A 4 /
S 4 (B8) (07- ) S4 - 3.0 TFSI
- Name: Radiator
- Quality class: P
Lisainfo: A4 (kvaliteediklass PJ)
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Equipment: for vehicles with/
without air conditioning - Construction Year from: 04.2015
- Core Depth [mm]: 26
- Core Length [mm]: 235
- Core Width [mm]: 189
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Technical Information: left
- Quality class: PJ
- Name: Radiator
Lisainfo: A4 (kvaliteediklass PJ) Additional information: A4 (kvaliteediklass PJ)
- Heating/Cooling: Auxiliary Radiator
- Core Depth [mm]: 26
- Core Length [mm]: 235
- Core Width [mm]: 188
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Heating/Cooling: Auxiliary Radiator
- for PR number: TG1
- Material: Aluminium
- Core Length [mm]: 235
- Core Width [mm]: 189
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 235*189*26
- Additional information: 235*189*26
- Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 32
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Brazed cooling fins
- Manufacturer: KAMOKA
- for PR number: TG1
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 720
- Core Width [mm]: 470
- Core Depth [mm]: 36
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 720*474*36
- Additional information: 720*474*36
- for PR number: TG1
- Radiator type: Brazed cooling fins
- Core Length [mm]: 235
- Core Width [mm]: 189
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Packaging width [cm]: 16
- Packaging height [cm]: 26
- Packaging length [cm]: 38.5
- Net Weight [g]: 782
- Manufacturer: MAHLE BEHR HELLA TERMIKA
Heating/Cooling: Auxiliary Radiator, for vehicles with auxiliary cooler General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- for PR number: TG1
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 470
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: with cap,
without expansion tank -
Supplementary Article/Supplementary Info: without gasket/
seal - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 60317
-
Lisainfo: AUDI A 4 /
S 4 (B8) (07- ) 3.2 FSI -
Additional information: AUDI A 4 /
S 4 (B8) (07- ) 3.2 FSI
- for PR number: TG1
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 468
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
- for OE number: 8K0121251H
-
Weight [g]: 4,
620 - Core Length [mm]: 720
- Core Width [mm]: 469
- Core Depth [mm]: 38
-
Gross Weight [g]: 6,
300 -
alternative item: -
- Manufacturer: DENSO
- for PR number: TG1
- Radiator type: Brazed cooling fins
- Core Length [mm]: 720
- Core Width [mm]: 474
- Core Depth [mm]: 36
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Packaging width [cm]: 19
-
Net Weight [g]: 4,
840 - Packaging height [cm]: 62.5
- Packaging length [cm]: 99
- Manufacturer: MAHLE BEHR HELLA TERMIKA
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Name: Radiator
- Quality class: Q
Lisainfo: "Tootja: OEM/OES
A4
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks