Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Lisainfo: Oilc. Tiguan 2.0 TDi * 11/07-
-
Name: Tihend,
oliradiaator - Manufacturer: MAX
- Number of Gaskets/Seals/Seal Rings: 2
- Manufacturer: FAST
- Weight [kg]: 0.008
- Manufacturer: METALCAUCHO
-
Name: Tihend,
oliradiaator - Manufacturer: DRM
- Quantity per packing unit: 4
- Quantity: 4
-
Name: Tihendikomplekt,
oliradiaator - Manufacturer: DRM
- Number of Gaskets/Seals/Seal Rings: 3
- Manufacturer: FAST
Manufacturer: ELRING
- Material: Rubber
-
for article number: V15-
60- 6087 - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Rubber
-
for article number: V15-
60- 6061 - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.008
-
Name: TIHENDIKOMPLEKT,
OLIRADIAATOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Model Year from: 2012
-
for combined PR number: TD1+G0Z,
TM4+G0Z - Weight [kg]: 0.01
- Quantity: 10
- Packaging length [cm]: 10
- Packaging width [cm]: 10
- Packaging height [cm]: 2
- Manufacturer: FEBEST
- Engine Code: CGLC
-
Alternative Repair Kit: 77000200,
77000300 -
Name: Tihendikomplekt,
oliradiaator - Manufacturer: AJU
- Core Depth [mm]: 50
- Core Length [mm]: 120
- Core Width [mm]: 100
- Material: Aluminium
- Material: Aluminium
- Core Width [mm]: 101
- Core Length [mm]: 121
- Core Depth [mm]: 51
-
Fabrication Number: CCL-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Cooling Type: Water-
cooled - Material: Aluminium
- Core Depth [mm]: 51
- Core Width [mm]: 70
- Core Length [mm]: 110
- Manufacturer: KAMOKA
- Core Length [mm]: 110
- Core Width [mm]: 70
- Core Depth [mm]: 51
- Weight [kg]: 0.52
- Packaging length [cm]: 14
- Packaging width [cm]: 12
- Packaging height [cm]: 10
- Manufacturer: AKSDASIS
- Manufacturer: DR MOTOR
- Name: DRM 211015
- Length [mm]: 110
- Width [mm]: 70
- Manufacturer: DELLO AUTOMEGA
- Quantity: 1
- Weight [kg]: 0.384
- Thickness [mm]: 51
- Width [mm]: 101
- Required quantity: 1
- Material: Aluminium
- Number of connectors: 4
- Length [mm]: 121
- General Information: oil cooler
- Manufacturer: VIKA
- Name: Oil cooler
- Quality class: PJ
Lisainfo: A1 (kvaliteediklass PJ)
- Material: Aluminium
- Housing Type: without housing
-
Cooling Type: Water-
cooled - Core Length [mm]: 110
- Core Width [mm]: 70
- Core Depth [mm]: 51
- Manufacturer: BGA
- Core Depth [mm]: 49
- Core Length [mm]: 110
- Core Width [mm]: 70
- Material: Aluminium
-
Name: Oliradiaator,
mootorioli - Manufacturer: MAG
- Length [mm]: 121
- Width [mm]: 101
- Height [mm]: 51
- Number of connectors: 4
- Material: Aluminium
- Weight [kg]: 0.392
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Name: OLIRADIAATOR,
MOOTORIOLI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Cooling Type: Water-
cooled - Core Depth [mm]: 51
- Core Length [mm]: 121
- Core Width [mm]: 100
- Material: Aluminium
- Supplementary Article/Supplementary Info: without oil filter housing
- Material: Aluminium
- Supplementary Article/Info 2: with filter
- Cooling Type: Air cooled
- Packaging length [cm]: 15
- Packaging width [cm]: 11.5
- Packaging height [cm]: 6
- Weight [kg]: 0.5
- Manufacturer: AKSDASIS
- for OE number: 03L117021C
-
Name: Oliradiaator,
mootorioli - Manufacturer: MD
-
Cooling Type: Water-
cooled - Supplementary Article/Supplementary Info: with oil filter housing
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Material: Aluminium
- Housing Type: with housing
-
Cooling Type: Water-
cooled - Supplementary Article/Info 2: with filter
- Manufacturer: BGA
-
Vehicle Identification Number (VIN) from: 4G-
B- 000 001 -
Transmission Type: 6-
Speed Manual Transmission - Engine Code: CGLC
- Length [mm]: 110
- Width [mm]: 70
- Height [mm]: 51
- Number of ribs: 15
-
Name: Oliradiaator,
mootorioli - Manufacturer: PIE
-
Cooling Type: Water-
cooled - Core Length [mm]: 110
- Core Width [mm]: 70
- Core Depth [mm]: 53
-
Fabrication Number: CCL-
AU- 010 - Manufacturer: NTY
-
Name: NTY CCL-
AU- 010
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Cooling Type: Water-
cooled - Material: Aluminium
- Core Depth [mm]: 51
- Core Width [mm]: 70
- Core Length [mm]: 110
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Name: OLIRADIAATOR,
MOOTORIOLI - Manufacturer: NRF
-
Cooling Type: Water-
cooled - Supplementary Article/Supplementary Info: with oil filter housing
- Material: Aluminium
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Length [mm]: 121
- Width [mm]: 101
- Height [mm]: 51
- Number of connectors: 4
- Material: Aluminium
- Weight [kg]: 0.384
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Core Depth [mm]: 51
- Core Length [mm]: 111
- Core Width [mm]: 70
- Material: Aluminium
-
Name: Oliradiaator,
mootorioli - Manufacturer: MAG
-
Cooling Type: Water-
cooled - Core Depth [mm]: 54
- Core Length [mm]: 121
- Core Width [mm]: 101
- Material: Aluminium
- Outlet Ø [mm]: 16
-
Supplementary Article/Supplementary Info: without oil filter housing,
with gaskets/ seals - Supplementary Article/Info 2: without filter
-
Technical Information: FIRST FIT -
Includes gaskets and bolts when needed - Manufacturer: NISSENS
- Name: NI 90681
-
Lisainfo: VOLKSWAGEN SCIROCCO
(137, 138) (08- ) 2.0 TDi -
Additional information: VOLKSWAGEN SCIROCCO
(137, 138) (08- ) 2.0 TDi
- General Information: oil cooler complete
- Manufacturer: VIKA
Quality class: PJ
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Cooling Type: Water-
cooled - Length [mm]: 189
- Width [mm]: 211
- Height [mm]: 226
- Manufacturer: JPN
-
Cooling Type: Water-
cooled - Core Depth [mm]: 155
- Core Length [mm]: 216
- Core Width [mm]: 126
- Housing material: Plastic
- Material: Aluminium
- Number of ribs: 14
- Outlet Ø [mm]: 16
-
Supplementary Article/Supplementary Info: with oil filter housing,
with gaskets/ seals - Supplementary Article/Info 2: with filter
- Name: NI 91158
- Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN SCIROCCO
(137, 138) (08- ) 2.0 TDi -
Additional information: VOLKSWAGEN SCIROCCO
(137, 138) (08- ) 2.0 TDi
-
Fabrication Number: CCL-
AU- 071 - Supplementary Article/Supplementary Info: with oil filter housing
- Housing material: Aluminium
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: METALCAUCHO
Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Material: Aluminium
-
Cooling Type: Water-
cooled - Manufacturer: FAST
- General Information: oil cooler complete; aluminum shell
- Manufacturer: VIKA
- Core Length [mm]: 110
- Core Width [mm]: 70
- Core Depth [mm]: 50
- Radiator type: Brazed cooling fins
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Packaging width [cm]: 11.7
- Packaging length [cm]: 14.4
- Net Weight [g]: 395
- Packaging height [cm]: 6.2
- Manufacturer: MAHLE BEHR HELLA TERMIKA
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks