Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Manufacturer: KAMOKA
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Overall Length [mm]: 1,
290 - Number of circuits: 4
- Fitting Position: after catalytic converter
-
Fabrication Number: ESL-
AU- 022 - Manufacturer: NTY
Lisainfo: ENG.1.8/2.0,3.0,3.6 AUDI A3,A4 B6-B7,A6 C6,, VW GOLF V-VI, JETTA III-IV, PASSAT B6, PORSCHE CAYENNE, SEAT ALHAMBRA, ALTEA, EXEO, LEON, SKODA OCTAVIA II, SUPERB II / DIAGNOSTYCZNA, ZA KATALIZATOREM ,D. CAK. 1290MM Additional information: ENG.1.8/2.0,3.0,3.6 AUDI A3,A4 B6-B7,A6 C6,, VW GOLF V-VI, JETTA III-IV, PASSAT B6, PORSCHE CAYENNE, SEAT ALHAMBRA, ALTEA, EXEO, LEON, SKODA OCTAVIA II, SUPERB II / DIAGNOSTYCZNA, ZA KATALIZATOREM ,D. CAK. 1290MM
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Diagnostic Probe,
Finger probe - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Oxygen Sensor: Oxygen Sensor
- Fitting Position: Rear
- General Information: lambda probe; rear
- Manufacturer: VIKA
-
Oxygen Sensor: Diagnostic Probe,
Finger probe, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 730
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Additional information: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)"
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
-
Cable Length [mm]: 1,
015 - Name: LAMBDA ANDUR
- Manufacturer: DLP
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
-
Cable Length [mm]: 1,
285 -
Name: DE ES20524-
12B1 - Manufacturer: DELPHI
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Alternatively:
- Number of circuits: 4
- Alternative Repair Kit: 570112
- Manufacturer: ERA
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Guarantee: 3 years guarantee
- Weight [kg]: 0.16
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Cable Length [mm]: 750
- Number of circuits: 5
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CTPA
- Fitting Position: after catalytic converter
- Required quantity: 2
- Colour: brown
-
Cable Length [mm]: 1,
300 - Conductor Number: 4
- Supplementary Article/Info 2: with fastening material
- Available as universal article as well, see article no.: 1.998.235
- Number of circuits: 4
- Name: EP 1.998.245
- Manufacturer: EPS
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Overall Length [mm]: 1,
290 - Available as universal article as well, see article no.: 0258986602
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Oxygen Sensor: Regulating Probe,
Heated - Length [mm]: 800
- Conductor Number: 5
- Number of circuits: 5
- Resistor [Ohm]: 4.9
- Cable Length [mm]: 800
- Manufacturer: MAGNETI MARELLI
-
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor, Heated - Cable Length [mm]: 331
- Manufacturer: DELPHI ELEKTRONIKA
Fitting Position: for cylinder 1, for cylinder 2, for cylinder 3, for cylinder 4, for cylinder 5, before catalytic converter
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
-
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor, Heated - Cable Length [mm]: 615
-
Name: DE ES21368-
12B1 - Manufacturer: DELPHI
Fitting Position: for cylinder 1, for cylinder 2, for cylinder 3, for cylinder 4, for cylinder 5, before catalytic converter
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor -
Fitting Position: before catalytic converter,
for cylinder 6- 10 - Number of circuits: 5
- Overall Length [mm]: 750
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 800
- Number of pins: 6
- Socket colour: black
- Manufacturer: FAE
- Engine Code: CTPA
-
Fitting Position: for cylinder 1-
5, before catalytic converter - Required quantity: 1
- Colour: grey
- Length [mm]: 750
- Cable Length [mm]: 735
- Conductor Number: 5
- Supplementary Article/Info 2: with fastening material
- Number of circuits: 5
- Name: EP 1.998.374
- Manufacturer: EPS
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased
-
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor, Heated - Cable Length [mm]: 720
- Manufacturer: DELPHI
-
Name: DE ES20541-
12B1
Fitting Position: for cylinder 6, for cylinder 7, for cylinder 8, for cylinder 9, for cylinder 10, before catalytic converter
- Oxygen Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 6- 10 - Number of circuits: 5
- Overall Length [mm]: 750
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor -
Fitting Position: for cylinder 1-
5, before catalytic converter - Required quantity: 1
- Cable Length [mm]: 800
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Oxygen Sensor: Finger probe
- Fitting Position: Front
- General Information: lambda probe; front
- Manufacturer: VIKA
- Oxygen Sensor: Oxygen Sensor
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Manufacturer: SKV GERMANY
- Name: CE 09SKV915
- Oxygen Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
for cylinder 1- 5 - Number of circuits: 5
- Overall Length [mm]: 750
-
Recommended change interval [km]: 250,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 05.2014
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 735
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
- Name: VA 368403
Oxygen Sensor: Planar probe, Broadband oxygen sensor, Thread pre-greased, Heated
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks