Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 2
- Colour: blue
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins
- for OE number: 049919563B
- Thread Size: M10x1 mm
- Spanner Size: 13 mm
- Number of pins: 1
- Manufacturer: KAMOKA
- Additional information: 4080049 KAMOKA
- Lisainfo: 4080049 KAMOKA
- for OE number: 26906161
- Spanner Size: 19
- Housing Colour: white
- Manufacturer: KAMOKA
- for OE number: 025906041A
- Housing Colour: blue
- Manufacturer: KAMOKA
- Number of pins: 2
- Colour: white
- External Thread [mm]: M10x1
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins
- Length [mm]: 25
- Temperature range to [°C]: 125
- External Thread Size: M10 x 1
- Thread Length [mm]: 10.9
- Spanner Size: 14
- Number of connectors: 1
- Colour Coding: black
- Weight [kg]: 0.012
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Temperature range to [°C]: 125
- Length [mm]: 25
- External Thread Size: M10 x 1
- Thread Length [mm]: 10.9
- Spanner Size: 14
- Number of connectors: 1
- Colour Coding: black
- Weight [kg]: 0.012
- Supplementary Article/Info 2: with seal ring
- Name: SW 99 90 1939
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Switch Point [°C]: 120
- Colour: grey
- Manufacturer: JP GROUP
- Lisainfo: Sender for water temperature gauge 3 pins
- Additional information: Sender for water temperature gauge 3 pins
- Engine Code: DZ
- Thread Size: M10x1
- Spanner Size: 13
- Name: EP 1.830.073
- Manufacturer: EPS
- Engine Code: DZ
- Thread Size: M10x1
- Spanner Size: 13
- Manufacturer: FACET
- Thread Size: M10 x 1
- Spanner Size: 14
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 1
- Colour Coding: blue
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: DZ
- Thread Size: M10x1
- Spanner Size: 13
- Corresponds to the original part in colour: blue
- Name: EP 1.830.093
- Manufacturer: EPS
- Number of connectors: 2
- Colour: blue
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: DZ
- Manufacturer: FACET
- Number of connectors: 2
- Colour: blue
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal - Name: SW 30 93 4762
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: DZ
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 - Name: EP 1.830.278
- Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Engine Code: DZ
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- Length [mm]: 37
- Supplementary Article/Info 2: with seal ring
- for OE number: 025 906 041 A
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour Coding: blue
- Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: DZ
- Thread Size: M10x1
- Spanner Size: 19
- Name: EP 1.830.171
- Manufacturer: EPS
- Engine Code: DZ
- Thread Size: M10x1
- Spanner Size: 19
- Manufacturer: FACET
-
Thread Size: M10x1,
0 - Colour: white
- Spanner Size: 19
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- External Thread Size: M10 x 1
- Number of connectors: 1
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 3825
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- External Thread Size: M10 x 1
- Number of connectors: 2
- Colour: white
- Weight [kg]: 0.025
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 3
- Colour: grey
- Switch Point [°C]: 120
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: DZ
- Warn Temperature [°C]: 125
- Name: EP 1.830.533
- Manufacturer: EPS
- Number of connectors: 3
- Colour: grey
- Switch Point [°C]: 120
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 7608
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: white
-
Catalytic Converter Type: with three-
way catalytic converter - Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks