Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Lower, Front, Rear - Control/Trailing Arm Type: Control Arm
- Required quantity: 4
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: AUDI,
VOLKSWAGEN -
Additional information: AUDI,
VOLKSWAGEN
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, Rear - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount -
Material: Rubber/
Metal - Thickness [mm]: 46
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 39
- Manufacturer: MERTZ
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 80
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 80
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right, Rear - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Vehicle Equipment: for vehicles with power steering
Lisainfo: Rubber mount for wishbone, front, models with power steering Additional information: Rubber mount for wishbone, front, models with power steering
- Length [mm]: 44
- Fitting Position: Lower Front Axle
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 38
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Quantity per packing unit: 4
- Fitting Position: Lower Front Axle
- Height [mm]: 44
- Weight [kg]: 0.15
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37.5
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 150
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle Left,
Front Axle Right, Front Axle -
Vehicle Identification Number (VIN) to: 8A-
L- 045 001 - Quantity per packing unit: 4
- Axle alignment required after fitting:
- Diameter [mm]: 54
- Control/Trailing Arm Type: Control Arm
- reinforced version:
- Weight [kg]: 0.145
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - SVHC: No SVHC present!
- Manufacturer: FAG
- Quantity per packing unit: 2
- Fitting Position: Lower Front Axle
- Height [mm]: 44
- Weight [kg]: 0.12
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 38
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Vehicle Equipment: for vehicles without power steering
- Weight [g]: 120
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear,
Rear Axle, Front, both sides - Control/Trailing Arm Type: for control arm
-
Name: Puks -
Kndmik VW P. A80/ PASS - Manufacturer: MAX
-
Fitting Position: Front Axle,
inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37.4
- Width [mm]: 44
- SVHC: No SVHC present!
- Name: Puks
- Manufacturer: FAG
- Vehicle Equipment: for vehicles with power steering
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right -
Material: Rubber/
Metal - Thickness [mm]: 44
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 47,
37 - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.15
-
Name: DY 37-
06032- 5 - Manufacturer: DYS
- Vehicle Equipment: for vehicles with power steering
- old version:
- Thickness [mm]: 44
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 37,
47 -
Material: Rubber/
Metal - Fitting Position: Lower Front Axle
- Weight [kg]: 0.143
-
Name: Puks -
Kndmik VW P. A80/ PASSAT (ZE WSPOM.) - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
inner, in front of axle, Lower - Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 38
- Thickness 1 [mm]: 44
- Manufacturer: DELPHI
- Name: DE TD463W
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 22
- Height [mm]: 38
- Name: ALT 81398AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Rear Axle,
Lower, Front Axle -
Vehicle Identification Number (VIN) from: 8A-
N- 200 000 - Required quantity: 4
-
Material: Rubber/
Metal - Weight [g]: 161
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 38
- Length [mm]: 44
- Name: IM 2090
- Manufacturer: ORIGINAL IMPERIUM
- new version:
- Length [mm]: 44
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.12
-
Name: Puks -
Kndmik VW P. A80/ PASSAT (ZE WSPOM.) - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with power steering
- old version:
- Thickness [mm]: 44
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 37.5,
47 -
Material: Rubber/
Metal - Fitting Position: Lower Front Axle
- Weight [kg]: 0.155
- Name: SW 32 69 0008
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: Rubber/
Metal - Length from [mm]: 44
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37
- Name: Control arm bush left=right
- Quality class: PJ
Fitting Position: Front Axle, Lower, Front Axle Left, Front Axle Right
Lisainfo: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle both sides,
Front, Lower, Rear - Required quantity: 4
- paired article number: VKDS 331010
- Manufacturer: SKF
- Name: SK VKDS331010
- new version:
- Length [mm]: 44
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.12
- Name: SW 30 60 0036
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI 80/ VW PASSAT
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right -
Vehicle Identification Number (VIN) to: 8A-
L- 045 001 - Height [mm]: 44
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37.5
- Supplementary Article/Supplementary Info: without holder
- Vehicle Equipment: for vehicles with power steering
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
- Manufacturer: MEY
General Information: Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution. Name: Puks - Kndmik VW P. A80/PASSAT HD (ZE WSPOM.) KONIERZ 55MM
- Vehicle Equipment: for vehicles with power steering
-
Fitting Position: Front Axle Right,
Lower, inner, Front Axle Left - Height [mm]: 44
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: MEY
General Information: Reinforced rubber bushing with guaranteed longer lifetime Name: Puks - Kndmik VW P. A80/PASSAT HD (ZE WSPOM.) KONIERZ 48MM
-
Fitting Position: Rear Axle,
Front, Rear - Weight [kg]: 0.14
- Required quantity: 4
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Fitting Position: Front Axle,
Lower - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 37
- Height [mm]: 44
- Name: ALT 80988AL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Lower Front Axle
- for OE number: 8A0 407 181
- Manufacturer: GSP
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
-
Fitting Position: Rear,
Rear Axle, Front, both sides - Control/Trailing Arm Type: for control arm
-
Name: Puks -
Kndmik VW P. A80/ PASSAT (ZE WSPOM.) - Manufacturer: LMI
-
Required quantity: 8,
2 - Supplementary Article/Info 2: with grease cap
- Shore-A hardness value, base body: 80
-
Material: PU
(Polyurethane) - Colour: red
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 38
- Weight [kg]: 0.162
- Name: PUKS
- Manufacturer: TED
Fitting Position: Rear, Lower, Front, both sides, Rear Axle, Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Length [mm]: 44
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 54
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks