• Transmission Type: Manual Transmission, Automatic Transmission
• Fitting Position: Front Axle, Wheel Side
• Internal Toothing wheel side: 30
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Manual Transmission
• Length [mm]: 113.5
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 50
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52
• Outer Diameter [mm]: 90
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Wheel Side
• Length [mm]: 114
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 50.5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Internal Toothing differential side, conn. to transmission: 33
• Length [mm]: 32
• Diameter 1 [mm]: 100
• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fabrication Number: NPZ-SK-005
• Internal Toothing wheel side: 30
• External Toothing wheel side: 36
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: 5-Speed Manual Transmission, Automatic Transmission, 4-Speed Automatic Transmission, Manual Transmission, 6-Speed Manual Transmission

• Fabrication Number: NPW-VW-005
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: NTY
• Name: NTY NPW-VW-005

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, 4-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Outer Diameter 1 [mm]: 97.9
• Sealing Ring Diameter [mm]: 52
• Adjustment Range [s]: 123
• Manufacturer: BGA

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Length [mm]: 104.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 72
• External Thread [mm]: M16 x 1,5
• Outer Diameter [mm]: 90
• Manufacturer: JPN

• Fabrication Number: NPW-VW-002
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: NTY
• Name: NTY NPW-VW-002

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Transmission Type: 5-Speed Manual Transmission
• Block Separation:
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• for OE number: 377498103E
• Supplementary Article/Info 2: with bolts/screws, with lock tab
• Technical Information Number: Original design
• Manufacturer: GSP

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Fitting Position: Rear Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 82
• Joint Type: CV Joint
• Fabrication Number: NPZ-VW-043
• Manufacturer: NTY

• Transmission Type: 5-Speed Manual Transmission
• Length [mm]: 34
• Bore Diameter [mm]: 8.2
• Internal Toothing differential side, conn. to conn. shaft: 33
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Joint Diameter [mm]: 100
• Manufacturer: JPN

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle Left, transmission sided
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• for OE number: 1K0407331
• Technical Information Number: Non-Original design
• Manufacturer: GSP POLOSIE I PRZEGUBY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-VW-036
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• Manufacturer: NTY

Transmission Type: 7-Speed Dual-Clutch Transmission, not for 7-speed manual transmission

• Fitting Position: transmission sided
• Inner Diameter [mm]: 33
• General Information: Inner joint; Inner tooth33mm
• Manufacturer: VIKA

• Fabrication Number: NPW-VW-013
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: NTY
• Name: NTY NPW-VW-013

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission, Automatic Transmission, 5-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission

• Fitting Position: Front Axle
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• General Information: Outer joint; Inner tooth30mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Number of Teeth: 33
• Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Manufacturer: VIKA

General Information: Inner joint; inner; 33teeth; MT; 100mm; Inner tooth33mm

• Transmission Type: Manual Transmission
• Length [mm]: 105
• Outer Diameter [mm]: 90
• External Thread Size: M16 x 1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Sealing Ring Diameter [mm]: 72
• Weight [kg]: 2.03
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter 2 [mm]: 100
• External Toothing differential side: 33
• Length 2 [mm]: 34
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.003

Vehicle Identification Number (VIN): [6K-X-081153;], [6K-X-524 122;], [;8L-X-001445], [8L-X-001446;] Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Fitting Position: Front Axle Left, transmission sided
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: JPN

• Thread Size: M16x1,5
• Sealing Ring Diameter [mm]: 50.75
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Version: 6 balls
• Length 2 [mm]: 113.5
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Manufacturer: SNR /NTN-SNR/
• Name: SN OJK54.008

• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52
• Outer Diameter [mm]: 90
• Bellows Material: Rubber
• Manufacturer: METELLI PRZEGUBY POLOSIE

• Fitting Position: transmission sided, Front Axle Left
• External Toothing differential side: 40
• Internal Toothing differential side, conn. to transmission: 28
• Sealing Ring Diameter [mm]: 46
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Fabrication Number: NPW-VW-031
• Manufacturer: NTY
• Name: NTY NPW-VW-031

• Fitting Position: Wheel Side, Front Axle
• Transmission Type: Dual-Clutch Transmission
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 52
• Outer Diameter [mm]: 97.9
• Bellows Material: Rubber
• Manufacturer: METELLI PRZEGUBY POLOSIE

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Sealing Ring Diameter [mm]: 52
• Thread Size: M16x1,5
• External Toothing wheel side: 36
• Length 2 [mm]: 114.5
• Internal Toothing wheel side: 30
• Name: SN OJK54.028
• Manufacturer: SNR

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 5-Speed Manual Transmission
• Length [mm]: 114.5
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52
• Technical Information Number: Original design, Groove Type Inner
• Manufacturer: GSP

• Fitting Position: Front Axle Left, transmission sided
• for PR number: T0H
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Bellows Material: Thermoplast
• Length [mm]: 32
• SVHC: No SVHC present!
• Name: LU 771072030
• Manufacturer: FAG

• Fitting Position: transmission sided, Front Axle
• Length [mm]: 34
• Outer Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Weight [kg]: 1.7
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CUSB
• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Front Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Number of Holes: 6
• Joint Type: Flexible Joint Disc
• Manufacturer: SKF
• Name: SK VKJA8001

• Vehicle Identification Number (VIN): [1M-3-109 001;]
• External Toothing differential side: 28
• Inner Diameter 2 [mm]: 108
• Length 2 [mm]: 32
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.006

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Engine Code: CUSB
• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Thread Size: M16x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Dust Cover: with dust cover
• Manufacturer: SKF
• Name: SK VKJA5265

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: Front Axle Right, transmission sided
• Length [mm]: 104
• External Toothing differential side: 40
• Internal Toothing differential side, conn. to transmission: 28
• Sealing Ring Diameter [mm]: 46.9
• for OE number: 5N0498103
• Manufacturer: GSP

• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Model Year from: 2015
• Fitting Position: transmission sided, Front Axle
• Weight [kg]: 1.932
• Internal Toothing differential side, conn. to transmission: 33
• Sealing Ring Diameter [mm]: 100
• Outer Diameter [mm]: 99
• Joint Type: Flexible Joint Disc
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Engine Code: CUSB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: transmission sided, Front Axle Right
• Length [mm]: 104.5
• Internal Toothing differential side, conn. to conn. shaft: 28
• Internal Toothing differential side, conn. to transmission: 40
• Sealing Ring Diameter [mm]: 56
• Outer Diameter [mm]: 98
• Machined: with groove in inner part (inside)
• Manufacturer: SKF PRZEGUBY POLOSIE OSLONY

• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Model Year from: 2015
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.102
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Packaging length [cm]: 18
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Engine Code: CUSB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: transmission sided, Front Axle Left
• Length [mm]: 64.1
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Joint Type: Flexible Joint Disc
• Machined: with groove in inner part (inside)
• Manufacturer: SKF
• Name: SK VKJA8015

• Transmission Type: Automatic Transmission
• Model Year from: 2015
• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.49
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Engine Code: CUSB
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fitting Position: Wheel Side, Front Axle
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 52
• Technical Information: Pre-greased joint
• Manufacturer: SKF

• Transmission Type: 5-Speed Manual Transmission
• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 33
• Machined: without groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 34
• Supplementary Article/Info 2: with cap
• Bore Diameter [mm]: 8
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: Manual Transmission, Automatic Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 54
• Machined: with groove in internal component
• Joint Diameter [mm]: 90
• Length [mm]: 114
• Thread Size: M16x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with nut
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Transmission Type: Automatic Transmission
• for PR number: G1C
• Model Year from: 2015
• Fitting Position: Front Axle, transmission sided
• Weight [kg]: 2.46
• Internal Toothing differential side, conn. to transmission: 28
• Sealing Ring Diameter [mm]: 108
• Outer Diameter [mm]: 107
• Joint Type: Flexible Joint Disc
• Packaging length [cm]: 18
• Packaging width [cm]: 11
• Packaging height [cm]: 11
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 52
• Machined: with groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 140
• Thread Size: M16x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with nut
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required! General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.