• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber, Plastic
• Thickness [mm]: 52
• Width [mm]: 170
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 63
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Fitting Position: inner, in front of axle, Front Axle, Lower
• Roolimisliik: Õõtshoob
• vajaminev tükihulk: 2
• Laagritüüp: Kummi-metalllaager
• Lisainfo: AUDI, SEAT, SKODA, VW
• Additional information: AUDI, SEAT, SKODA, VW

• Fitting Position: outer, Rear Axle, Lower, Rear
• Trim Level: AT WHEEL CARRIER
• soovitava lisavarustuse artiklinumber: 8500 298001
• Roolimisliik: Õõtshoob
• Laius (mm): 50
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 37
• Laagritüüp: Kummi-metalllaager
• Lisainfo: AUDI, SEAT, SKODA, VW
• Additional information: AUDI, SEAT, SKODA, VW

Tehniline informatsioon: "Schraubensatz ist nicht enthalten. Siehe Zubehörliste für separaten Schraubensatz"

• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Hulk telje kohta: 2
• Välisläbimõõt [mm]: 37
• Siseläbimõõt [mm]: 12
• Laius (mm): 29
• ainult paarina välja vahetada:
• Manufacturer: TOPRAN

Installatsiooni pool: Tagasild vasakul, Tagasild paremal, all, taga, väljas Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, üleval
• Laagritüüp: Kummi-metalllaager
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, rear, inner, upper
• Additional information: Rubber mount for wishbone, rear, inner, upper

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, üleval, sees
• Laagritüüp: Kummi-metalllaager
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, rear, inner
• Additional information: Rubber mount for wishbone, rear, inner

• Fitting Position: Front Axle, Front
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Manufacturer: DELLO AUTOMEGA

• Fabrication Number: ZTP-VW-001A
• Manufacturer: NTY

Fitting Position: Front Axle, inner, in front of axle, Left, Right, Lower

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Quantity: 2
• Fitting Position: Front Axle
• General Information: bonded rubber bush; front; round
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Manufacturer: MERTZ

• Fitting Position: Rear Axle, Upper
• Manufacturer: GSP

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Laagritüüp: Kummi-metalllaager
• Lisainfo: Rubber mount for wheel bearing housing
• Additional information: Rubber mount for wheel bearing housing

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 22
• Height [mm]: 38
• Name: ALT 81398AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower, Lower Front Axle
• OE-numbri jaoks: 1K0 407 182
• Manufacturer: GSP

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Fitting Position: Rear Axle, Upper
• Manufacturer: GSP

• Fitting Position: Right, Left
• Installatsiooni pool: Esisild, ees
• Kogupikkus [mm]: 54
• Välisläbimõõt [mm]: 48
• Siseläbimõõt [mm]: 12
• Name: COC 80005079
• Manufacturer: CORTECO

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, väljas
• Manufacturer: JP-GROUP
• Lisainfo: Rubber mount for wishbone, rear, outer
• Additional information: Rubber mount for wishbone, rear, outer

• vajaminev tükihulk: 2
• Installatsiooni pool: taga, all, kahepoolne, Tagasild, väljas
• Kaal (kg): 0,161
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 37,1
• Manufacturer: TEDGUM
• Name: TG 00720911

• Construction Year to: 10.2018
• Fitting Position: Front Axle
• Kvaliteet: OE Performance
• Värv: hõbedane
• Kaal (g): 180
• Manufacturer: GATES

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• OE-numbri jaoks: 1K0 505 541 B
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• OE-numbri jaoks: 1K0 505 553
• Manufacturer: GSP

• Thickness [mm]: 45
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZTT-VW-006A
• Manufacturer: NTY

Fitting Position: Rear Axle, Upper, inner, Rear Axle Left, Rear Axle Right

• Quantity per packing unit: 2
• Sillamõõtmine pärast paigaldust vajalik:
• OE-numbri jaoks: 1K0 505 553 A
• Installatsiooni pool: Tagasild
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,133
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: all, ees, esisild vasakul, esisild paremal
• Jämedus/Tugevus (mm): 54
• Välisläbimõõt 1 [mm]: 28
• Välisläbimõõt 2 [mm]: 40
• Siseläbimõõt 1 [mm]: 12
• Manufacturer: BGA

• Quantity per packing unit: 2
• Sillamõõtmine pärast paigaldust vajalik:
• Installatsiooni pool: Tagasild üleval, sees
• Laagritüüp: Kummi-metalllaager
• Siseläbimõõt [mm]: 12,05
• Välisläbimõõt [mm]: 38,05
• Roolimisliik: õõtshoova jaoks
• OE-numbri jaoks: 1K0 505 279 A
• Kaal (kg): 0,081
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right, Front
• Material: Rubber/Metal
• Thickness [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 62, 59
• Manufacturer: MERTZ

• Fitting Position: outer, Rear Axle Lower, inner, Lower
• Manufacturer: GSP

• Installatsiooni pool: vasakul, paremal, Esisild
• vajaminev tükihulk: 2
• Materjal: Kumm/metall
• Roolimisliik: õõtshoova jaoks
• Kaal (g): 239
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 39
• pikkus üle kõige (mm): 54
• Name: IM 1620
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Siseläbimõõt 1 [mm]: 12
• Välisläbimõõt 1 [mm]: 40
• Jämedus/Tugevus 1 (mm): 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, rear
• Additional information: Rubber mount for wishbone, front, rear

• Roolimisliik: Õõtshoob
• Installatsiooni pool: Esisild
• Sillamõõtmine pärast paigaldust vajalik:
• Kaal (kg): 0,182
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Lower
• OE-numbri jaoks: 1K0 505 171 C
• Manufacturer: GSP

• Fitting Position: outer, Right, Left
• Installatsiooni pool: Tagasild
• Kogupikkus [mm]: 49,8
• Välisläbimõõt [mm]: 37,6
• Siseläbimõõt [mm]: 12,1
• Name: COC 80005462
• Manufacturer: CORTECO

• Fitting Position: Front, Lower Front Axle
• Fabrication Number: ZTP-HD-025D
• Mounting Type: Rubber-Metal Mount
• Manufacturer: NTY

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 54
• Name: ALT 81191AL
• Manufacturer: ALTE AUTOMOTIVE

• Quantity per packing unit: 2
• Installatsiooni pool: Tagasild
• OE-numbri jaoks: 1K0 505 543 A
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,213
• Manufacturer: VAICO
• Additional information: V10-1456
• Lisainfo: V10-1456

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper, outer
• Material: Rubber/Metal
• Width [mm]: 45
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Manufacturer: MERTZ

• Production date to: 10/18
• Installatsiooni pool: Esisild, ees, all
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 40
• OE-numbri jaoks: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Rear Axle both sides, Front
• Weight [kg]: 0.16
• Shape: oval
• Thickness [mm]: 64
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 61.5, 59
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle, outer, Lower, Rear
• Siseläbimõõt 1 [mm]: 49
• Välisläbimõõt 1 [mm]: 12
• Jämedus/Tugevus 1 (mm): 38
• Manufacturer: DELPHI
• Name: DE TD1058W

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.18
• Name: DY 37-06068-6
• Manufacturer: DYS

• Jämedus/Tugevus (mm): 64
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 61,5, 59
• Materjal: Kumm/metall
• Installatsiooni pool: Tagasild vasakul, ees, Tagasild paremal
• Kuju: ovaalne
• Kaal (kg): 0,16
• Hooldusinfot jälgida:
• Name: Puks - K„„ndmik VW T. A3/GOLF5/TOU
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Välisläbimõõt [mm]: 38,8
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12
• vajaminev tükihulk: 2
• Installatsiooni pool: Tagasild üleval, sees
• Kaal (kg): 0,14
• Manufacturer: TED

Name: Puks - K„„ndmik VW T. GOLF 04-/ A3 03-/ LEON/TOLEDO 05-

• Jämedus/Tugevus (mm): 54
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 48, 28
• Materjal: Kumm/metall
• Installatsiooni pool: esisild vasakul, all, ees, esisild paremal
• Kaal (kg): 0,183
• Hooldusinfot jälgida:
• Name: Puks - K„„ndmik VW P. GOLF5/JETT3/
• Manufacturer: FEB

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• SVHC: SVHS aineid ei esine
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Rear Axle, Lower, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 50
• Name: ALT 94739AL
• Manufacturer: ALTE AUTOMOTIVE

• Quantity per packing unit: 2
• Installatsiooni pool: Tagasild, kahepoolne, Tagasild üleval, sees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 38
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,231
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle both sides, Upper, outer
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.125
• Material: Rubber/Metal
• Thickness [mm]: 45
• Required quantity: 2
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 39, 24
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Quantity: 2
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.124
• Material: Rubber/Metal
• Thickness [mm]: 50
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Fitting Position: Rear Axle both sides
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Installatsiooni pool: Tagasild, üleval, kahepoolne, väljas
• Roolimisliik: õõtshoova jaoks
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: MAX

• Laius (mm): 45
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 40
• Materjal: Kumm/metall
• Installatsiooni pool: Tagasild vasakul, väljas, Tagasild paremal
• Kaal (kg): 0,19
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: FEB

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper, inner
• Length [mm]: 60
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Manufacturer: MERTZ

• Jämedus/Tugevus (mm): 64
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 61,5, 59
• Materjal: Kumm/metall
• Installatsiooni pool: Tagasild vasakul, ees, Tagasild paremal
• Kuju: ovaalne
• Kaal (kg): 0,16
• Hooldusinfot jälgida:
• Name: SW 30 92 9568
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 3C0505223F, 3C0505224F
• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Kõrgus (mm): 64
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 60
• Roolimisliik: für Längslenker
• Name: Puks - K„„ndmik VW T. A3 04-/GOLF5
• Manufacturer: MAX

• Material: Rubber/Metal
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 42, 25
• Manufacturer: MERTZ

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner

• Siseläbimõõt [mm]: 12
• Installatsiooni pool: Tagasild all, ees, sees
• Roolimisliik: õõtshoova jaoks
• vajaminev tükihulk: 2
• Kaal (kg): 0,207
• Välisläbimõõt [mm]: 40,4
• Name: Puks
• Manufacturer: TED

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper, outer
• Material: Rubber/Metal
• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38, 24
• Manufacturer: MERTZ

• Jämedus/Tugevus (mm): 60
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 42, 25
• Materjal: Kumm/metall
• Installatsiooni pool: Tagasild vasakul, all, Tagasild paremal
• Kaal (kg): 0,098
• Hooldusinfot jälgida:
• Name: Puks - K„„ndmik VW T. A3/GOLF5/TOU
• Manufacturer: FEB

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Weight [kg]: 0.07
• Height 1 [mm]: 26.3
• Height 2 [mm]: 44.8
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38.4
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 70
• Manufacturer: METALCAUCHO

• Quantity per packing unit: 2
• Fitting Position: Front, Front Axle both sides
• Thickness [mm]: 54
• Weight [kg]: 0.187
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 28, 48
• Mounting Type: Rubber-Metal Mount
• Manufacturer: METALCAUCHO

• for OE number: 1K0407182F
• Installatsiooni pool: esisild vasakul, esisild paremal, all
• Name: DA DSS1079
• Manufacturer: DAYCO

• Production date from: 07/13
• Installatsiooni pool: Tagasild, taga, üleval
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 38,6
• OE-numbri jaoks: Part of 5Q0505323D
• paaris tootenumbrid: 2256142
• Manufacturer: SASIC

• Fitting Position: Rear Axle, Lower, in front of axle
• Siseläbimõõt 1 [mm]: 12
• Välisläbimõõt 1 [mm]: 60
• Jämedus/Tugevus 1 (mm): 64
• Manufacturer: DELPHI
• Name: DE TD975W

• Laius (mm): 45
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 40
• Materjal: Kumm/metall
• Installatsiooni pool: Tagasild vasakul, väljas, Tagasild paremal
• Kaal (kg): 0,19
• Name: SW 40 94 0591
• Manufacturer: SWAG
• Lisainfo: 40 94 0591 SWA
• Additional information: 40 94 0591 SWA

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Height [mm]: 45
• Name: ALT 86598AL
• Manufacturer: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kõrgus (mm): 64
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 60
• Roolimisliik: für Längslenker
• Piirangutega toode/piirangu info: ilma kinnituseta
• vajaminev tükihulk: 2
• soovitatav vahetada paarikaupa:
• Name: Puks - K„„ndmik VW T. A3/GOLF5/TOU
• Manufacturer: MEY
• Lisainfo: 1005050014
• Additional information: 1005050014

• Fitting Position: Front Axle, Front
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• SVHC: SVHS aineid ei esine
• Name: Puks
• Manufacturer: FAG

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Weight [kg]: 0.33
• Height 1 [mm]: 32
• Height 2 [mm]: 45
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 330
• Manufacturer: METALCAUCHO

• Installatsiooni pool: ees, kahepoolne, Tagasild
• Roolimisliik: für Längslenker
• Siseläbimõõt [mm]: 12
• Kaal (kg): 0,17
• vajaminev tükihulk: 2
• Välisläbimõõt [mm]: 60,2
• Manufacturer: TEDGUM

• Jämedus/Tugevus (mm): 60
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 42, 25
• Materjal: Kumm/metall
• Installatsiooni pool: Tagasild vasakul, all, Tagasild paremal
• Kaal (kg): 0,07
• Name: SW 32 92 9690
• Manufacturer: SWAG
• Lisainfo: 32 92 9690 SWA
• Additional information: 32 92 9690 SWA

Tehniline informatsioon: Please tighten the mounting bolts with the wheels on the ground. Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.