• Switch Pressure [bar]: 0.4
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Engine Code: 21114
• Pressure [bar]: 0
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: 21114
• Thread Size: M16x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 19
• Thread Size: 3/8
• for OE number: 04067872
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M16 x 1,5
• Number of pins: 1
• Manufacturer: ERA

• Engine Code: 21114
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX
• Lisainfo: 21-0225
• Additional information: 21-0225

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: 21114
• Thread Size: M16x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.099, 1.880.116, 1.880.141, 1.880.142, 1.880.156, 1.880.170, 1.880.193

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 55199579
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: 21114
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 21114
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Resistor [Ohm]: 2,053, 238
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M16x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: red
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009107151
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Alternatively:
• Number of pins: 2
• Resistor [Ohm]: 680
• Alternative Repair Kit: 550486
• Fitting Depth [mm]: 35
• Manufacturer: ERA

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD
• Lisainfo: 87642 M&D
• Additional information: 87642 M&D

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550488
• Resistor [kOhm]: 4.3
• Manufacturer: ERA

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10218

• Quantity: 1
• Block Separation:
• Cable Length [mm]: 280
• Manufacturer: DELPHI
• Name: DE ES20638-12B1

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 01.2005
• Fitting Position: before catalytic converter
• Lambda Sensor: Finger probe
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 01.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 440
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258006537

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV506
• Manufacturer: ESEN SKV

• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 01.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 01.2005
• Manufacturer Restriction: Bosch
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Required quantity: 1
• Mounting Type: Pipe-neck
• Number of pins: 5
• Suction pipe connector diameter [mm]: 70
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 8ET009142691
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.