• Fabrication Number: ECT-FR-002
• Manufacturer: NTY

• Fabrication Number: ECT-TY-002
• Manufacturer: NTY
• Name: NTY ECT-TY-002

• Number of pins: 2
• Sensor Type: NTC Sensor
• Colour Coding: green
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: J8942220010
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207056
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Engine Code: PEY7
• Manufacturer Restriction: DENSO
• Number of connectors: 2
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: green
• Supplementary Article/Supplementary Info: with seal
• Thread Size: M12x1,5
• Weight [kg]: 0.032
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 280
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: grey
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: PEY7
• Manufacturer Restriction: DENSO
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 1.880.606, 1.880.732, 1.880.733
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ESS-MZ-002
• Manufacturer: NTY

• Colour: green
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Quantity: 2
• Number of pins: 3
• Name: DE SS11938-12B1
• Manufacturer: DELPHI

• Fabrication Number: ECM-MZ-005
• Name: NTY ECM-MZ-005
• Manufacturer: NTY

Fabrication Number: ECT-MZ-001

• Fitting Position: Front, outer, Rear
• Colour: black
• Number of connectors: 2
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-MZ-050

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Length [mm]: 995
• Socket colour: white

• Length [mm]: 995
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-MZ-051

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 92
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Number of pins: 2
• Cable Length [mm]: 995
• Manufacturer: KAMOKA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ERA

• Engine Code: PEY7, PEY5
• Block Separation:
• Vehicle Identification Number (VIN): JMZ, JM0, JM7
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 92
• Weight [kg]: 0.048
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for model code: BM4, BN4
• Construction Year to: 08.2014, 08.2016
• Block Separation:
• Overall Length [mm]: 975
• Length [mm]: 32
• Sensor Type: Active sensor
• Socket colour: grey
• Cable Length [mm]: 915
• paired article number: 31700
• Weight [kg]: 0.07
• Manufacturer: A.B.S.

• Engine Code: PEY7, PEXL, PEY5
• Block Separation:
• Vehicle Equipment: for vehicles without electric parking brake
• Number of connectors: 2
• Supplementary Article/Info 2: with retaining strap
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 995
• Weight [kg]: 0.068
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Number of connectors: 3
• Weight [kg]: 0.016
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 03.2019
• Engine Code: PE
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: Sensor, parkimisabi
• Manufacturer: MAG

• Engine Code: PEY7
• Required quantity: 1
• Manufacturer: EPS

• Construction Year to: 03.2019
• Engine Code: PE
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 366563

• Voltage [V]: 12
• Fabrication Number: EPP-MZ-003
• Manufacturer: NTY

• Valve type: Air Valve
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Recommended change interval [km]: 160,000
• Recommended change interval [years]: 5
• Weight [kg]: 0.048
• Observe the vehicle manufacturer specifications:
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Number of pins: 2
• Colour: white

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Length [mm]: 619
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-MZ-023

• Lambda Sensor: Diagnostic Probe, Finger probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 720
• Name: DE ES21320-12B1
• Manufacturer: DELPHI

• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV182
• Manufacturer: ESEN SKV

• Lambda Sensor: Lambda Sensor
• Thread Size: M18x1.5
• Overall Length [mm]: 900
• Cable Length [mm]: 850
• Number of pins: 4
• Manufacturer: ERA

• Vehicle Production Country: Japan
• Number of pins: 4
• Colour: black
• Manufacturer: FAE

• for OE number: PE121886Z
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 690
• Number of pins: 4
• Weight [g]: 122
• Gross Weight [g]: 150
• Manufacturer: DENSO
• Name: DN DOX-0624

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor

• Resistor Type: Hot-wire Sensor
• Number of connectors: 5
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.041
• Housing Type: without housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor Type: Hot-wire Sensor
• Number of connectors: 5
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.041
• Housing Type: without housing
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: PEY7, PEXL
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 720
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 619
• Name: DE ES21210-12B1
• Manufacturer: DELPHI