• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Exhaust System: for pre-catalytic converter
• for OE number: FP4718861B
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 326
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 123
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
626 V (GF), 05.97-10
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
626 V (GF), 05.97-10
(kvaliteediklass: Q)"

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 1047284
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: J8942220010
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Housing Colour: grey
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10287

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Cable Length [mm]: 800
• Fitting Depth [mm]: 38.7
• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-MZ-053

• for OE number: FSD7-18-221B
• Cable Length [mm]: 400
• Fabrication Number: ECP-MZ-002

• Thread Size: 3/8x18 NPTF
• Manufacturer: VERNET

• Engine Code: FP33
• Thread Size: 3/8 NPT
• Spanner Size: 19
• Name: EP 1.994.004
• Manufacturer: EPS

• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309561
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Right
• Fabrication Number: HCA-MZ-005
• paired article number: HCA-MZ-004

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-MZ-004
• paired article number: HCA-MZ-005

• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: grey
• Thread Size: 3/8x18 NPTF
• Manufacturer: FAE

• Engine Code: FP33
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.234
• Manufacturer: EPS

• Number of pins: 2
• Housing Colour: grey
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 1
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Engine Code: FP33
• Cable Length [mm]: 430
• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550345
• Fitting Depth [mm]: 26.5
• Manufacturer: ERA

• Fitting Position: Rear
• Length [mm]: 810
• Number of pins: 2
• Plug Type: Male
• Voltage [V]: 12
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Socket colour: white
• Name: CE 06SKV345
• Manufacturer: ESEN SKV

• Fitting Position: Rear
• Length [mm]: 790
• Number of pins: 2
• Plug Type: Male
• Voltage [V]: 12
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Socket colour: white
• Name: CE 06SKV344
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Right
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 840
• Name: DE SS20242
• Manufacturer: DELPHI

• Number of pins: 3
• Supplementary Article/Info 2: with cable

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Fitting Position: Rear Axle Right
• Number of pins: 2
• paired article number: 55817
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Number of pins: 2
• paired article number: 55816
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 10.1999
• Engine Code: FP33, FP63
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122571
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV904
• Manufacturer: ESEN SKV

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: FP33, FP63
• Voltage [V]: 12
• Length [mm]: 400
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV001
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Left
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 840
• Manufacturer: DELPHI

• Transmission Type: Manual Transmission
• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 348
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV567
• Manufacturer: ESEN SKV

• Construction Year to: 10.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986507

• Construction Year from: 08.1999
• Number of connectors: 2
• Weight [kg]: 0.1
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: with housing
• Fabrication Number: EPP-MZ-002