• Quantity per packing unit: 10
• contains article number: 13413
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Electrode Gap [mm]: 0.7
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number to: 040649, 099990
• Transmission Type: Manual Transmission, Automatic Transmission
• Block Separation:
• Quantity per packing unit: 10
• contains article number: 13407
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Electrode Gap [mm]: 0.7
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Spanner Size: 16 mm
• for OE number: 2240140V06
• Manufacturer: KAMOKA

• Electrode Gap [mm]: 1.1
• Thread Size: M14 x 1,25
• Spanner Size: 16
• Thread Length [mm]: 19
• Tightening Torque [Nm]: 30
• Spark Plug: 1 - Earthed Electrode
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Weight [kg]: 0.06
• Spark Plug: 1 - Earthed Electrode
• Version: E7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 111.960
• Required quantity: 4
• Quantity per packing unit: 10
• for OE number: 46551935
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: K16TT
• Manufacturer: DENSO
• Name: DN K16PRU

• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Height [mm]: 51
• Weight [kg]: 0.062
• Spark Plug: 1 - Earthed Electrode
• Version: VR7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: M 111.960
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK
• Lisainfo: BCP6ES
• Additional information: BCP6ES

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat, Fixed SAE connector

• Electrode Gap [mm]: 0.7
• Length [mm]: 76.4
• Width [mm]: 19.6
• Height [mm]: 16
• Weight [kg]: 0.06
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 10
• contains article number: 13504
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Electrode Gap [mm]: 0.8
• Spark Plug: with gasket seat, 3 - Earthed Electrode
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 111.960
• Quantity per packing unit: 4
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat

• Engine Code: M 111.960
• Required quantity: 4
• Quantity per packing unit: 4
• for OE number: 1WT2 18 110
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: IK16
• Manufacturer: DENSO
• Name: DN K16TT
• Lisainfo: K16TT DENSO
• Additional information: K16TT DENSO

• Required quantity: 4
• Quantity per packing unit: 10
• Elektroodide vahe (mm): 0,9
• Ühendustehnika: SAE
• Keermemõõt: M14x1.25
• Võtmekaugus: 16 mm
• Kvaliteet/klass: Cu-core GE
• Konteineri tüüp: Sahtel
• Keermepikkus (mm): 19
• tehnilise informatsiooni number: C11YCC
• Sädemeasetus (mm): 3
• Väändejõud alates [Nm]: 25
• Väändejõud kuni [Nm]: 30
• pakendi pikkus [cm]: 8,65
• pakendi laius [cm]: 2,45
• pakendi kõrgus [cm]: 2,45
• Ulatus [mm]: 1,5
• Name: CH OE057/T10
• Manufacturer: CHAMPION

Süüteküünal: 1-massielektrood, koos lametihendikohaga, Vask-keskelektrood

• Required quantity: 4
• Quantity per packing unit: 10
• Elektroodide vahe (mm): 0,8
• Ühendustehnika: SAE
• Keermemõõt: M14x1,25
• Võtmekaugus: 16 mm
• Süüteküünal: 1-massielektrood, koos lametihendikohaga
• Keermepikkus (mm): 19
• tehnilise informatsiooni number: 14 F-8 DU4
• SB tunnustatud pakend vaata spetsifikatsiooni:
• Väändejõud alates [Nm]: 25
• Väändejõud kuni [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Elektroodide vahe (mm): 0,9
• Ühendustehnika: SAE
• Keermemõõt: M14x1.25
• Võtmekaugus: 16 mm
• Kvaliteet/klass: Ti Poly-V
• Konteineri tüüp: Sahtel
• Süüteküünal: 1-massielektrood, koos lametihendikohaga
• Keermepikkus (mm): 19
• tehnilise informatsiooni number: CET2
• Sädemeasetus (mm): 3
• Väändejõud alates [Nm]: 25
• Väändejõud kuni [Nm]: 30
• pakendi pikkus [cm]: 8,85
• pakendi laius [cm]: 2,6
• pakendi kõrgus [cm]: 2,35
• Takistus alates [koom]: 3
• Takistus kuni [koom]: 10
• Ulatus [mm]: 1,5
• Manufacturer: CHAMPION

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Elektroodide vahe (mm): 0,9
• Ühendustehnika: SAE
• Keermemõõt: M14x1,25
• Võtmekaugus: 16 mm
• Kvaliteet/klass: Poly-V Tit
• Süüteküünal: 1-massielektrood, koos lametihendikohaga
• Keermepikkus (mm): 19
• Väändejõud alates [Nm]: 25
• Väändejõud kuni [Nm]: 30
• Takistus alates [koom]: 3
• Takistus kuni [koom]: 10
• Name: SššTEKššNAL
• Manufacturer: BERU

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 4
• Elektroodide vahe (mm): 1
• Ühendustehnika: SAE
• Keermemõõt: M14x1.25
• Võtmekaugus: 16 mm
• Kvaliteet/klass: Pt GE
• Konteineri tüüp: Sahtel
• Keermepikkus (mm): 19
• tehnilise informatsiooni number: RC11WYPB4
• Sädemeasetus (mm): 3
• Väändejõud alates [Nm]: 25
• Väändejõud kuni [Nm]: 30
• pakendi pikkus [cm]: 8,382
• pakendi laius [cm]: 2
• pakendi kõrgus [cm]: 2,032
• Takistus alates [koom]: 3
• Takistus kuni [koom]: 10
• Ulatus [mm]: 1,5
• Name: CH CCH9003
• Manufacturer: CHAMPION

Süüteküünal: 1-massielektrood, koos lametihendikohaga, Iriidiumist keskelektrood

• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Electrode Gap [mm]: 1.1
• Thread Size: M14
• Spanner Size: 16 [mm]
• Number of pins: 1
• Thread Length [mm]: 19
• Thread Pitch [mm]: 1.25
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Required quantity: 4
• Electrode Gap [mm]: 0.7
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 4
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: M 111.960
• Required quantity: 4
• Fuel Type: CNG/LPG
• Quantity per packing unit: 4
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 1 - Earthed Electrode, Platinum mass electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: IK16TT
• Manufacturer: DENSO
• Name: DN IK16TT
• Lisainfo: IK16TT DENSO
• Additional information: IK16TT DENSO

• Engine Code: M 111.960
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: NG BCPR6EIX
• Manufacturer: NGK

Spark Plug: Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Required quantity: 4
• Fuel Type: Liquefied Petroleum Gas (LPG)
• Alternatively:
• Recommended change interval [km]: 30,000
• Quantity per packing unit: 10
• Elektroodide vahe (mm): 0,7
• Ühendustehnika: SAE
• Keermemõõt: M14x1,25
• Võtmekaugus: 16 mm
• Süüteküünal: 1-massielektrood, koos lametihendikohaga
• Keermepikkus (mm): 19
• tehnilise informatsiooni number: 14 FR-7 DPPUS2
• SB tunnustatud pakend vaata spetsifikatsiooni:
• Väändejõud alates [Nm]: 25
• Väändejõud kuni [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Engine Code: M 111.960
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Manufacturer: NGK

Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode