Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Boot for shock absorber,
front -
Additional information: Boot for shock absorber,
front
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 83
- Replace in pairs only:
- Manufacturer: TOPRAN
- Lisainfo: 400363 ERT
- Additional information: 400363 ERT
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- SVHC: No SVHC present!
-
Name: Kaitsemts/
kaitsekumm, amort - Manufacturer: FAG
- Block Separation:
- Fitting Position: Front Axle
-
Lisainfo: Tower rubber stop,
front -
Additional information: Tower rubber stop,
front
Suspension: for vehicles without sports suspension, for vehicles without increased spring tension, for vehicles with sports suspension
- Suspension: for vehicles with sports suspension
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Right,
Front Axle Left - Height [mm]: 75
-
Material: PU
(Polyurethane) - Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Tower rubber stop,
front -
Additional information: Tower rubber stop,
front
- Suspension: for vehicles with increased spring tension
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.052
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 18
- Material: Rubber
- Number of Knobs: 3
- Fitting Position: Rear Axle
- Weight [kg]: 0.13
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thickness [mm]: 23,
47 -
Inner Diameter [mm]: 71,
109 - Outer Diameter [mm]: 113
- Colour: black
- Material: Rubber
- Number of Knobs: 4
- Fitting Position: Front Axle
- Weight [kg]: 0.23
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Block Separation:
- Length [mm]: 75
- Width [mm]: 53
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.046
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
Suspension: for vehicles without sports suspension, for vehicles without increased spring tension, for vehicles with sports suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Height [mm]: 94.8
- Outer Diameter [mm]: 52.5
- Suspension: for vehicles with increased spring tension
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Quantity per packing unit: 2
- for OE number: 201 325 1044
- Fitting Position: Front Axle
- Thickness [mm]: 13
-
Name: PODKADKA SPR¨½YNY DB T. W124/
W201 (13MM) - Manufacturer: TRU
- Quantity per packing unit: 2
- for OE number: 201 321 1084
- Fitting Position: Front Axle
- Thickness [mm]: 13
-
Name: Puhver,
vedrustus - Manufacturer: TRU
- Fitting Position: Front Axle
- Height [mm]: 74.8
- Outer Diameter [mm]: 50
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
Suspension: for vehicles without sports suspension, for vehicles without increased spring tension
-
Thickness [mm]: 23,
47 -
Inner Diameter [mm]: 71,
109 - Outer Diameter [mm]: 113
- Colour: black
- Material: Rubber
- Number of Knobs: 4
- Fitting Position: Front Axle
- Weight [kg]: 0.23
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Height [mm]: 150
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid DB P. W124/201 LE/PR
- Installatsiooni pool: esisild mõlemapoolselt
-
Kaal (kg): 0,
154 - Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Height [mm]: 83
- Outer Diameter [mm]: 52.5
- Suspension: for vehicles without bad road version
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.06
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 83
- Width [mm]: 53
-
Material: PU
(Polyurethane) -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.044
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
Suspension: for vehicles without sports suspension, for vehicles without increased spring tension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Fitting Position: Front Axle
- Fitting Position: Front Axle
- Manufacturer: ASHIKA
-
Additional information: ASH159-
00- 0509 -
Lisainfo: ASH159-
00- 0509
- Installatsiooni pool: Esisild
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Installatsiooni pool: esisild mõlemapoolselt
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
MERCEDES
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
MERCEDES
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0012
- Fitting Position: Front Axle
- Quantity Unit: Set
- Height [mm]: 150
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Quantity per packing unit: 2
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Additional information: 915124 KYB
- Lisainfo: 915124 KYB
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- not for trim level: Sportline
- Quantity per packing unit: 2
- Hulk: 2
- Manufacturer: KAVO PARTS
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- not for trim level: Sportline
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Weight [g]: 284
- Component Number: 4
- Name: IM 50303
- Manufacturer: ORIGINAL IMPERIUM
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.154
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
- Additional information: FE13034
- Lisainfo: FE13034
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- not for trim level: Sportline
- Quantity per packing unit: 2
- Weight [kg]: 0.3
- Guarantee: 5 years guarantee
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.154
- Name: SW 10 56 0008
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Manufacturer: AUTOFREN SEINSA
-
Vehicle type: Heavy Duty,
Tropen - Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Manufacturer: BILSTEIN
-
Name: BI 11-
101406 - Quality class: Q
Lisainfo: "Tootja: BILSTEIN
MERCEDES 190 (W201)
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks