• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Transmission Type: 7-Speed Automatic Transmission
• Filter type: Filter Insert
• Lisainfo: Hydraulic Filter, automatic transmission
• Additional information: Hydraulic Filter, automatic transmission

• Transmission ID: 722.4
• Filter type: Screen Filter
• Thickness [mm]: 12.5
• Outer Diameter [mm]: 8
• Weight [kg]: 0.005
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission Type: 4-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 722.4
• Filter type: Screen Filter
• Thickness [mm]: 12.5
• Outer Diameter [mm]: 8
• Weight [kg]: 0.005
• Name: SW 10 94 7283
• Manufacturer: SWAG

Transmission Type: 4-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 26
• Inner Diameter [mm]: 7
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 35
• Name: Hdraulikafilter,roolimine
• Manufacturer: MAX
• Lisainfo: PF-533
• Additional information: PF-533

• Filter type: Filter Insert
• Outer Diameter [mm]: 80.5
• Inner Diameter [mm]: 35
• Inner Diameter 1 [mm]: 35
• Height [mm]: 26
• Manufacturer: HENGST FILTER

• Transmission Type: 5-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Width [mm]: 112
• Height [mm]: 46
• Transmission Code: 5G TRONIC
• Manufacturer: KAMOKA

• Transmission Code: 722.3+722.4
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Filter type: Filter Insert
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic filter, gearbox
• Additional information: Hydraulic filter, gearbox

• Filter type: Screen Filter
• Length [mm]: 189
• Width [mm]: 175
• Thickness [mm]: 20
• Material: Steel
• Surface: Blank
• Weight [kg]: 0.25
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Transmission ID: 722.400 - 722.443
• Filter type: Screen Filter, Suction Filter
• Supplementary Article/Supplementary Info: without gasket/seal
• Housing Type: Metal Housing
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 26
• Inner Diameter [mm]: 7
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 35
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,ROOLIMINE
• Manufacturer: MAN

• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Filter type: Filter Insert
• Diameter [mm]: 80.6
• Sealing Ring Diameter [mm]: 35
• Height 1 [mm]: 26
• Packaging width [cm]: 2.8
• Packaging length [cm]: 8.2
• Packaging height [cm]: 8.2
• Net Weight [g]: 87
• Name: KN HX44
• Manufacturer: KNECHT

• Filter type: Filter Insert
• Diameter [mm]: 80.6
• Sealing Ring Diameter [mm]: 35
• Height 1 [mm]: 26
• Packaging width [cm]: 2.8
• Packaging length [cm]: 8.2
• Packaging height [cm]: 8.2
• Net Weight [g]: 87
• Manufacturer: MAHLE KNECHT

• Transmission Type: 4-Speed Automatic Transmission
• Transmission ID: 722.4
• Filter type: Screen Filter
• Length [mm]: 188.8
• Width [mm]: 175
• Height [mm]: 20
• Seal Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.425
• Supplementary Article/Info 2: with oil sump gasket
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB
• Lisainfo: 08900 FEBI
• Additional information: 08900 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Length [mm]: 200
• Width [mm]: 110
• Height [mm]: 50
• Manufacturer: KOLBENSCHMIDT

• Construction Year from: 09.1996
• Transmission Code: 722.600-722.699
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Width [mm]: 111
• Height [mm]: 18
• Outer Diameter [mm]: 28
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN
• Lisainfo: H 182 KIT MAN
• Additional information: H 182 KIT MAN

• Filter type: Suction Filter
• Transmission Type: 4-Speed Automatic Transmission
• Transmission Code: 722.3.., 722.4..
• not for transmission code: 722.323/350/353, 722.362/364/365/370
• Manufacturer: ELRING

• Transmission Number: 722.5
• Filter type: Fine Filter
• Height [mm]: 20
• Length [mm]: 184
• Width [mm]: 164
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic filter, gearbox
• Additional information: Hydraulic filter, gearbox

• Transmission Type: 4-Speed Automatic Transmission
• Transmission Code: 722.4, W4A 020
• Kõrgus (mm): 23,3
• Pikkus (mm): 187,3
• Laius (mm): 173,7
• Manufacturer: PURFLUX

• Transmission Number: 722.428
• Transmission Type: 4-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer Restriction: MERCEDES-BENZ
• Quantity Unit: Set
• Transmission Code: W 4 A 020, 722.4
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Transmission Number: 722.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer Restriction: MERCEDES-BENZ
• Quantity Unit: Set
• Transmission Code: W5A 030, 722.5, W4A 055, W4A 040, 722.3
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

Transmission Type: 4-Speed Automatic Transmission, 5-Speed Automatic Transmission

• Transmission Code: 722,3, 722,4
• See accessories list for additionally required parts:
• Transmission Type: 4-Speed Automatic Transmission
• Weight [kg]: 0.422
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filtritüüp: Filtrer
• Kõrgus (mm): 52
• Pikkus (mm): 188
• Laius (mm): 126
• Manufacturer: PURFLUX

• Transmission Type: Automatic Transmission
• Transmission ID: 722.400 - 722.443
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with gasket/seal
• for components see parts list:
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: 4-Speed Automatic Transmission
• Transmission ID: 722.4
• Length [mm]: 188.8
• Weight [kg]: 0.4
• Filter type: Screen Filter
• Manufacturer: DRIVE

• Transmission Code: 722.400-722.440
• Filtritüüp: Imifilter
• Pikkus (mm): 184
• Laius (mm): 164
• Kõrgus (mm): 21
• Siseläbimõõt [mm]: 26
• Piirangutega toode/piirangu info 2: õlivannitihendiga
• Avamisrõhk klapp (bar): 0,2
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Filtritüüp: Sõelfilter
• Manufacturer: JAPKO

• Construction Year to: 08.1996
• Transmission Code: 722.3+722.4
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Transmission ID: 722.428
• Transmission Type: 4-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Code: 722.4, W 4 A 020
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Supplementary Article/Supplementary Info: without gasket/seal
• Transmission Code: 722.5
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

Transmission Type: 4-Speed Automatic Transmission, 5-Speed Automatic Transmission

• Transmission Code: 722.901-722.999, 7G-Tronic
• Filtritüüp: Imifilter
• Pikkus (mm): 267
• Laius (mm): 174
• Kõrgus (mm): 18
• Siseläbimõõt [mm]: 21
• Manufacturer: DENCKERMANN FILTRY

• Transmission Code: 722.400-443
• Filtritüüp: Filtrer
• Käigukasti liik: automaatkastile, 4 käiku
• Piirangutega toode/piirangu info: koos tihendiga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission ID: 722.400-722.440
• Transmission Code: 722,4
• Transmission Type: 4-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.652
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sõidukivarustus: roolivõimendiga sõidukile
• Filtritüüp: Ühendusfilter
• Spetsifikatsioon: Magnetfilter
• Läbimõõt [mm]: 10
• Installatsiooni pool: Rooliajamist paisupaagini
• Manufacturer: AIC
• Lisainfo: 55266 AIC
• Additional information: 55266 AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Avamisrõhk klapp (bar): 0,2
• Pikkus (mm): 184
• Laius (mm): 164
• Kõrgus (mm): 20
• Siseläbimõõt [mm]: 26
• Piirangutega toode/piirangu info 2: õlivannitihendiga
• SVHC: SVHS aineid ei esine
• Manufacturer: METALCAUCHO

• Transmission Code: 722.300-722.371, 722,3
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• Length [mm]: 183.7
• Width [mm]: 163.5
• Supplementary Article/Info 2: with oil sump gasket
• See accessories list for additionally required parts:
• Weight [kg]: 0.522
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Additional information: V30-0493
• Lisainfo: V30-0493

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Code: 722.3, W4A 040, W4A 055, 722.5, W5A 030
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

Transmission Type: 4-Speed Automatic Transmission, 5-Speed Automatic Transmission

• Transmission number from: 722.300
• Transmission number to: 722.440
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 189.7
• Width [mm]: 175
• Height [mm]: 23
• Supplementary Article/Supplementary Info: without gasket/seal
• Packaging length [cm]: 18
• Packaging height [cm]: 19
• Packaging width [cm]: 2
• Net Weight [g]: 320
• Manufacturer: MAHLE KNECHT

• Transmission Code: 722.4
• Filter type: Filter Insert
• Length [mm]: 189
• Width [mm]: 174
• Height [mm]: 24
• Manufacturer: HENGST FILTER

• Vehicle Equipment: for vehicles with automatic transmission
• Filter type: Filter Insert
• Length [mm]: 268
• Width [mm]: 175
• Height [mm]: 58
• Manufacturer: HENGST FILTER
• Lisainfo: EG841H D449
• Additional information: EG841H D449

• Transmission Code: 722.901-722.999, 7G-Tronic
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Inner Diameter [mm]: 21
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Transmission number from: 722.300
• Transmission number to: 722.395
• Filter type: Filter Insert
• Length [mm]: 186.5
• Width [mm]: 171
• Height [mm]: 23.6
• Inner Diameter 2 [mm]: 33
• Transmission Code: 722.3
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Fibre Composite
• Recommended change interval [km]: 60,000
• Packaging width [cm]: 2.9
• Packaging length [cm]: 26
• Packaging height [cm]: 38
• Net Weight [g]: 428
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN HX46D1

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission

• Transmission number from: 722.400
• Transmission number to: 722.440
• Filter type: Filter Insert
• Length [mm]: 169
• Width [mm]: 171
• Height [mm]: 23.6
• Inner Diameter 2 [mm]: 33
• Transmission Code: 722.4
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Fibre Composite
• Packaging width [cm]: 2.9
• Packaging length [cm]: 26
• Packaging height [cm]: 38
• Net Weight [g]: 420
• Manufacturer: MAHLE KNECHT

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission

• Transmission number from: 722.300
• Transmission number to: 722.395
• Filter type: Filter Insert
• Length [mm]: 186.5
• Width [mm]: 171
• Height [mm]: 23.6
• Inner Diameter 2 [mm]: 33
• Transmission Code: 722.3
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Fibre Composite
• Recommended change interval [km]: 60,000
• Packaging width [cm]: 2.9
• Packaging length [cm]: 26
• Packaging height [cm]: 38
• Net Weight [g]: 428
• Manufacturer: MAHLE KNECHT

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission

• Transmission Type: Automatic Transmission
• Transmission Code: 722500 - 722510
• Filter type: Filter Insert
• Length [mm]: 190
• Width [mm]: 175
• Height [mm]: 26
• Manufacturer: HENGST FILTER

• Construction Year to: 08.1996
• Transmission Code: 722.500-722.510, 722
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 20
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Construction Year to: 08.1996
• Transmission Code: 722.500-722.510, 722
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 20
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY