Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 25
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
505.550, 505.540 - Manufacturer: ELRING
- Lisainfo: 115.100 ELR
- Additional information: 115.100 ELR
-
Transmission Type: 7-
Speed Automatic Transmission - Thickness [mm]: 1.5
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- DIN/ISO: 7603
- Material: Copper
- Shape: A Shape
- Weight [kg]: 0.001
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
- Lisainfo: 04054 FEBI
- Additional information: 04054 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
- Material: Copper
- Inner Diameter [mm]: 12.5
- Thickness [mm]: 1.5
- Outer Diameter [mm]: 17
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: M 276.850
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Manufacturer: AJUSA
-
Thread Size: M14x1,
5 - Length [mm]: 24
- Additionally required articles (article numbers): 259.150.100
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13 mm
- Name: SULGURKRUVI
- Manufacturer: FIS
-
Transmission Type: 7-
Speed Automatic Transmission - Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 12
- Weight [kg]: 0.011
- Supplementary Article/Info 2: without seal ring
- Name: SULGURKRUVI
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5 - Length [mm]: 24
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13 mm
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FA1
- Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
- Screw length below head [mm]: 12
- Weight [kg]: 0.012
- Supplementary Article/Info 2: with seal ring
- for OE number: 000908 012009 S2
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
- Additional information: FE46409
- Lisainfo: FE46409
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5x33 - Spanner Size: 13 mm
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: with seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: DRM
- Quantity per packing unit: 10
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: FIS
-
Thread Size: M14x1,
5x33 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13 mm
- Alternative Repair Kit: 505.540
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- Quantity per packing unit: 5
-
Thread Size: M14x1,
5x33 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13 mm
-
Alternative Repair Kit: 877.840,
505.540 - Supplementary Article/Info 2: without seal ring
-
Name: Sulgurkruvi,
olivann - Manufacturer: ELR
-
for special equipment code: 427,
M002 -
Transmission Type: 7-
Speed Automatic Transmission - Vehicle Equipment: for vehicles with exhaust turbocharger
- Charge Type: for vehicles with charge air cooler
- Block Separation:
- Vehicle configuration line / variant: Leistungsgesteigert
- Material: Steel
-
Thread Size: M12 x 1,
5 - Length [mm]: 16
- Thread Length [mm]: 12
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 6
- Supplementary Article/Info 2: with seal ring
-
Seal Material: Copper,
Aluminium - Always compare old and new part (in particular OE No.):
- Manufacturer: METZGER
- Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
-
Surface: Tin-
plated - Screw length below head [mm]: 13
- Weight [kg]: 0.011
- Supplementary Article/Info 2: with seal ring
- for OE number: 000908 012009 S1
- Name: SULGURKRUVI
- Manufacturer: FEB
- Lisainfo: 46398 FEBI
- Additional information: 46398 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for special equipment code: 427,
M002 -
Transmission Type: 7-
Speed Automatic Transmission - Vehicle Equipment: for vehicles with exhaust turbocharger
- Charge Type: for vehicles with charge air cooler
- Block Separation:
- Quantity per packing unit: 5
- Surface: Blank
- Required quantity: 1
- Fitting Position: Oil Sump
- Thread Size: M12
- Supplementary Article/Info 2: with seal ring
- Bolt Head-/Nut Design: Hexagon Socket
- Thread Pitch [mm]: 1.5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 15
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 9
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
-
Surface: Tin-
plated - Screw length below head [mm]: 13
- for OE number: 000908 012009 S1
- Supplementary Article/Info 2: with seal ring
- Name: SW 10 94 6398
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 38
- Outer Diameter [mm]: 28
- Thread Length [mm]: 25
- Material: Plastic
- Surface: Blank
- Weight [kg]: 0.013
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 38
- Outer Diameter [mm]: 28
- Thread Length [mm]: 25
- Material: Plastic
- Surface: Blank
- Weight [kg]: 0.013
- Supplementary Article/Info 2: with seal ring
- Name: SW 10 10 8016
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Manufacturer: FISCHER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks