• Length [mm]: 102
• Manufacturer: JP GROUP A/S
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

Lisainfo: Sensor, brake lining wear, front

• Fitting Position: Rear Axle
• Brake System: ATE

• Fitting Position: Front Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 98
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Brake System: ATE
• Brake Type: Disc Brake
• Length [mm]: 97
• Fitting Position: Rear Axle
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX
• Lisainfo: 2115401717/MG
• Additional information: 2115401717/MG

• Fitting Position: Rear Axle, Front Axle
• Brake Type: Disc Brake
• Length [mm]: 94
• Manufacturer: JPN

• Brake Type: Disc Brake
• Fitting Position: Front Axle, Rear Axle
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX
• Lisainfo: 20-0334
• Additional information: 20-0334

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 100
• Number of wear indicators [per axle]: 2
• Net weight [kg]: 0.01
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: NK

• Fitting Position: Rear Axle, Front Axle
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 92
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo, TRW
• Length [mm]: 97
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Fitting Position: Rear Axle, Front Axle
• Length [mm]: 94
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 97.5
• Manufacturer: LPR

• Fitting Position: Rear Axle, Front Axle
• Length [mm]: 94
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Name: SW 10 91 9186
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 95
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Brake Type: Disc Brake
• Fitting Position: Rear Axle, Front Axle
• Alternatively:
• Warning Contact Length [mm]: 97
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 377

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Length [mm]: 95
• Brake Type: Disc Brake
• Manufacturer: BOSCH
• Name: BS 1987473070

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length 1 [mm]: 100
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0153
• Quality class: PJ

Additional information: "Tootja: DELPHI
KLASA C T-MODEL (S20
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
KLASA C T-MODEL (S20
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Front Axle
• Required quantity: 1
• Block Separation:
• Brake Type: Disc Brake
• Length 1 [mm]: 55
• Warning Contact Length [mm]: 100
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle, Front Axle
• Block Separation:
• Brake Type: Disc Brake
• Weight [kg]: 1.05
• Warning Contact Length [mm]: 100
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2688A

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 12.5
• Thread Size: M8x1
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Female Torx
• Available as universal article as well, see article no.: TPM1000
• Weight [kg]: 0.003
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Quantity per packing unit: 2
• Thread Size: M8 x 12
• Required quantity: 2
• Observe the vehicle manufacturer specifications:
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Packaging length [cm]: 20
• Packaging width [cm]: 12
• Packaging height [cm]: 1
• Weight [kg]: 0.004
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 100
• Number of wear indicators [per axle]: 2
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo, TRW
• Length [mm]: 97
• Supplementary Article/Supplementary Info: Axle Kit
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRI

• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 97.5
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Brake System: Brembo
• Fitting Position: Front Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 102
• Length 2 [mm]: 110
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 95
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW
• Quality class: Q

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 100
• Brake Type: Disc Brake
• Number of wear indicators [per axle]: 1
• Manufacturer: TRW

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle
• Brake System: Brembo, TRW
• Length 1 [mm]: 97
• Brake Type: Disc Brake
• Name: DE LZ0363
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Brake System: AKEBONO
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2888A

• Fitting Position: Front Axle
• Brake System: Brembo
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK
• Additional information: QB109-1786
• Lisainfo: QB109-1786

• Fitting Position: Front Axle
• Brake System: TRW
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Rear Axle
• Fabrication Number: HCA-ME-039
• Manufacturer: NTY

• Fitting Position: Front Axle
• Brake System: TRW
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• paired article number: 233346
• Fitting Position: Front Axle Right
• Net weight [kg]: 0.18
• Name: Plekk,piduriketas
• Manufacturer: NK
• Additional information: 233347NK
• Lisainfo: 233347NK

• Fitting Position: Front Axle Left
• for OE number: 2044211120
• Material: Aluminium
• Manufacturer: KAMOKA

• Version: without sports pack
• Fitting Position: Front Axle
• Brake System: Brembo
• Manufacturer: FRENKIT
• Name: FR 901786

• Length [mm]: 724
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• for OE number: 2044211220
• Material: Aluminium
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads fitting kit

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Inner Diameter [mm]: 140
• Outer Diameter [mm]: 350
• paired article number: 131-07-208
• Article number of recommended accessories: 231-03-096, 231-03-203
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• Inner Diameter [mm]: 140
• Outer Diameter [mm]: 350
• paired article number: 131-07-207
• Article number of recommended accessories: 231-03-096, 231-03-203
• Manufacturer: ABAKUS LORO
• Additional information: 131-07-208 ABAK
• Lisainfo: 131-07-208 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 720
• Socket colour: black

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Colour: black
• Material: Aluminium
• Fabrication Number: HTO-ME-018
• paired article number: HTO-ME-017
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Colour: black
• Material: Aluminium
• Fabrication Number: HTO-ME-017
• paired article number: HTO-ME-018
• Manufacturer: NTY

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Guarantee: 3 years guarantee
• paired article number: 57SKV189
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Right
• Guarantee: 3 years guarantee
• paired article number: 57SKV188
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV189

• Fitting Position: Right, Front Axle
• Material: Aluminium
• Name: CFD 612328
• Manufacturer: DACO

• Fitting Position: Left, Front Axle
• Material: Aluminium
• Name: CFD 612327
• Manufacturer: DACO

• Fitting Position: Front Axle
• Colour: black
• Sensor Type: Active sensor
• Length [mm]: 810
• Manufacturer: JPN

• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 350
• Inner Diameter [mm]: 145

• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 350
• Inner Diameter [mm]: 145

• for special equipment code: 802/803, 804
• Fitting Position: Rear Axle
• Length [mm]: 724
• for OE number: 212 540 21 17
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 725
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for special equipment code: 805, 806, 807, 808, 809
• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 280
• Overall Length [mm]: 354
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left
• Manufacturer: YSPARTS

• Fitting Position: Front Axle Right
• Manufacturer: YSPARTS

• paired article number: 233347
• Fitting Position: Front Axle Left
• Net weight [kg]: 0.18
• Name: Plekk,piduriketas
• Manufacturer: NK

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• for OE number: 204 421 1120
• Fitting Position: Front Axle Left
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle, Left
• Material: Sheet Steel
• Name: CFD 612325
• Manufacturer: DACO

• for OE number: 212 540 2117
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Front Axle Right
• paired article number: 6115087
• Material: Aluminium
• Surface: Cathodic Painting
• Manufacturer: METZGER

• for OE number: 204 421 1220
• Fitting Position: Front Axle Right
• Manufacturer: TRUCKTEC

• Fitting Position: Left, Right, Rear Axle
• Required quantity: 2
• for special equipment code: 805806, 807
• Cable Length [mm]: 680
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218091

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Left
• Material: Aluminium
• paired article number: 11325
• Weight [kg]: 0.18
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Material: Aluminium
• paired article number: 11324
• Weight [kg]: 0.18
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Overall Length [mm]: 855
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 775
• paired article number: 31829
• Weight [kg]: 0.05
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake System: Brembo
• Manufacturer: BOSCH

• Fitting Position: Rear Axle Left
• Guarantee: 3 years guarantee
• paired article number: 57SKV624
• Weight [kg]: 0.6
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV623

• Fitting Position: Rear Axle Right
• Guarantee: 3 years guarantee
• paired article number: 57SKV623
• Weight [kg]: 0.61
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV624

• paired article number: 175123
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.531
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 175124
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.531
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for special equipment code: 802, 803, 804
• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle
• Overall Length [mm]: 730
• Length [mm]: 31
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 660
• paired article number: 32114
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 645
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Fitting Position: Front Axle
• Brake System: TRW
• Manufacturer: METZGER

• for special equipment code: 805, 806, 807, 808, 809
• Sensor Type: Active sensor
• Cable Length [mm]: 685
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: CZUJNIK ABS T. DB E, CLS 09- LE/PR
• Manufacturer: MEY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 685
• Sensor Type: Active sensor
• Number of pins: 2
• Manufacturer: ERA

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• paired article number: 11334
• Weight [kg]: 0.7
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• paired article number: 11333
• Weight [kg]: 0.7
• Manufacturer: A.B.S.

• paired article number: 33 10 6595
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.531
• Name: SW 33 10 6596
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.