• Fitting Position: Front Axle
• Height [mm]: 224
• Manufacturer: OPTIMAL ZAWIESZENIE

Braking/Driving Dynamics: for vehicles without electronic drive dynamics control

• Thickness [mm]: 224
• Inner Diameter [mm]: 68
• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 88
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN
• Additional information: FE40088
• Lisainfo: FE40088

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Length [mm]: 224
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Monotube
• Manufacturer: KAMOKA

• not for vehicle type: Sport edition
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye
• Length 1 [mm]: 640
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye
• Name: BM SA0882
• Manufacturer: BREMSI

• not for vehicle type: Sport edition
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye
• Length 1 [mm]: 670
• Manufacturer: ASHIKA-AMORTYZATORY

Suspension: for vehicles with comfort suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Suspension: for vehicles with comfort suspension
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 630
• Length 2 [mm]: 415
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN FILTRY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN FILTRY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 606
• Length 2 [mm]: 415
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• not for vehicle type: Sport Edition
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-10868
• Manufacturer: KAVO PARTS

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• not for vehicle type: Sport Edition
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-10867
• Manufacturer: KAVO PARTS

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 452309R
• Manufacturer: DACO

Suspension: for vehicles with comfort suspension, for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles without increased ground clearance

• not for vehicle type: Sport edition
• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KYB
• Name: KY 5538001

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-10863
• Manufacturer: KAVO PARTS

Suspension: for vehicles with comfort suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Vehicle type: excl. P84
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Right
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber right

Suspension: for vehicles without electronic suspension control, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-220118
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle type: excl. P84
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Left
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber left

Suspension: for vehicles without electronic suspension control, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye
• Manufacturer: KYB

Suspension: for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without comfort suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-10864
• Manufacturer: KAVO PARTS

Suspension: for vehicles with comfort suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.44
• Article number of recommended accessories: MK476
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Parameter: ETOV36/11X179.6A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: SACHS

Suspension: for vehicles with comfort suspension, for vehicles without electronic suspension control

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• paired article number: 3348064
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB
• Name: KY 3348065

Suspension: for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without comfort suspension, for vehicles without electronic suspension control

• Vehicle type: excl. P84
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Block Separation:
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 232
• Distance of mounting bores [mm]: 70
• Piston Rod Diameter [mm]: 22
• paired article number: A-5069GL
• Suspension Strut Outer Diameter [mm]: 54
• Bore Diameter 1 [mm]: 14
• Bore Diameter 2 [mm]: 15
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with comfort suspension, for vehicles without electronic suspension control, for vehicles with standard suspension

• Block Separation:
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 232
• Distance of mounting bores [mm]: 70
• Piston Rod Diameter [mm]: 22
• paired article number: A-5069GR
• Suspension Strut Outer Diameter [mm]: 54
• Bore Diameter 1 [mm]: 14
• Bore Diameter 2 [mm]: 15
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with comfort suspension, for vehicles without electronic suspension control, for vehicles with standard suspension

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• paired article number: 3348065
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB
• Name: KY 3348064

Suspension: for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without comfort suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Parameter: ET36/11X154A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: SACHS

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• not for vehicle configuration line / variant: AMG
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• paired article number: A-5225GL
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles without electronic suspension control, for vehicles without comfort suspension

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.94
• Length 1 [mm]: 381
• Length 2 [mm]: 539
• Article number of recommended accessories: MK453, PK383
• paired article number: 742278SP
• Packaging length [cm]: 57.3
• Packaging width [cm]: 20.4
• Packaging height [cm]: 20.4
• Manufacturer: MONROE

Suspension: for vehicles without electronic suspension control, for vehicles with increased ground clearance Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.94
• Length 1 [mm]: 381
• Length 2 [mm]: 539
• Article number of recommended accessories: MK453, PK383
• paired article number: 742277SP
• Packaging length [cm]: 57.3
• Packaging width [cm]: 20.4
• Packaging height [cm]: 20.4
• Manufacturer: MONROE

Suspension: for vehicles without electronic suspension control, for vehicles with increased ground clearance Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• paired article number: 3348061
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB
• Name: KY 3348060

Suspension: for vehicles with comfort suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• paired article number: 3348060
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB
• Name: KY 3348061

Suspension: for vehicles with comfort suspension, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• not for vehicle type: Sport Edition
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• paired article number: 3348063
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• not for vehicle type: Sport Edition
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• paired article number: 3348062
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.826
• Bore Diameter [mm]: 32
• Length 1 [mm]: 369
• Length 2 [mm]: 525
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK452, PK383
• paired article number: G8274
• Packaging length [cm]: 57.5
• Packaging width [cm]: 20.3
• Packaging height [cm]: 20.3
• Manufacturer: MONROE

Suspension: for vehicles without electronic suspension control, for vehicles without increased ground clearance Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.826
• Bore Diameter [mm]: 32
• Length 1 [mm]: 369
• Length 2 [mm]: 525
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK452, PK383
• paired article number: G8275
• Packaging length [cm]: 57.5
• Packaging width [cm]: 20.3
• Packaging height [cm]: 20.3
• Manufacturer: MONROE

Suspension: for vehicles without electronic suspension control, for vehicles without increased ground clearance Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Parameter: MT36/11X160A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: SACHS

Suspension: for vehicles with increased ground clearance, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Vehicle type: P84
• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36X167A
• Fitting Position: Front Axle Left
• paired article number: 315 268
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

Suspension: for vehicles with comfort suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36X167A
• Fitting Position: Front Axle Right
• paired article number: 315 267
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS AMORTYZATORY

Suspension: for vehicles with comfort suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/22X150A
• Fitting Position: Front Axle Left
• paired article number: 315 860
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/22X150A
• Fitting Position: Front Axle Right
• paired article number: 315 859
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: ST36/22X153A
• Fitting Position: Front Axle Left
• paired article number: 317 454
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS AMORTYZATORY

Suspension: for vehicles with increased ground clearance, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: ST36/22X153A
• Fitting Position: Front Axle Right
• paired article number: 317 453
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS AMORTYZATORY

Suspension: for vehicles with increased ground clearance, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-220103
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-220127
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
MERCEDES KLASA B W246
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
MERCEDES KLASA B W246
(kvaliteediklass: Q)"

• Vehicle type: excl. P84
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-230942
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-230935
• Quality class: Q

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle type: excl. P84
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-230935
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber right
• Quality class: Q

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-223401
• Shock Absorber System: Twin-Tube
• Name: BI 22-223395
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-223395
• Shock Absorber System: Twin-Tube
• Name: BI 22-223401
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"