Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 38
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Puks -
Kndmik DB T. W124 B T - Manufacturer: MEY
-
Fitting Position: Rear Axle,
both sides - Supplementary Article/Info 2: with mounting sleeves
-
Name: Puks -
Kndmik DB T. W124 Z T - Manufacturer: MAX
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 38
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 36
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Puks -
Kndmik DB T. W124 Z T - Manufacturer: MEY
-
Fitting Position: Left,
Right, Lower - Quantity per packing unit: 2
- Thickness 1 [mm]: 43
- Inner Diameter 1 [mm]: 12.1
- Outer Diameter 1 [mm]: 32.2
- Manufacturer: DELPHI
- Name: DE TD450W
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Rod/Strut: Camber Link
- Manufacturer: CORTECO
- Name: COC 21652516
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 43
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Puks -
Kndmik DB T. W124 - Manufacturer: MEY
- Quantity per packing unit: 2
- Axle alignment required after fitting:
- Fitting Position: Rear Axle
- Length [mm]: 38
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 36
- Weight [kg]: 0.119
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right - Rod/Strut: Push Rod
- Weight [kg]: 0.08
- Name: COC 21652517
- Manufacturer: CORTECO
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Name: Puks -
Kndmik DB T. W124/ 201/ 210 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
both sides -
Name: Puks -
Kndmik DB T. W124 Z T - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Rod/Strut: Push Rod
- Quantity Unit: Set
- Quality class: PJ
- Name: Tension rod left=right
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Pull Rod
- Length [mm]: 247
- Material: Sheet Steel
- Quantity Unit: Piece
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: MAX
Lisainfo: Track control arm, rear
-
Fitting Position: Rear Axle Upper,
inner - Control/Trailing Arm Type: Control Arm
- Rod/Strut: Push Rod
- Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Upper,
Rear Axle Right, Front, Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 247
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: MEY
-
Fitting Position: Rear Axle,
Upper, both sides, Rear - Rod/Strut: Camber Link
- Article number of recommended accessories: 21685 01
- Manufacturer: LEMFORDER
- Name: LMI 2963101
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
Upper - Rod/Strut: Pull Rod
-
Alternative Repair Kit: V30-
7541 - Weight [kg]: 0.828
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 210 350 3306
- Fitting Position: Rear Axle both sides
- Rod/Strut: Pull Rod
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Rod/Strut: Pull Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Supplementary Article/Supplementary Info: with fastening/
mounting material -
Name: Stabilisaator,
kndmik - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Width [mm]: 370,
63 - Height [mm]: 40
-
Fitting Position: Rear Axle,
Lower - Weight [kg]: 0.858
- Rod/Strut: Push Rod
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Upper,
Rear Axle Right, Front, Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 247
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR KPL ZE RUBAMI
- Name: Control arm left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Front, Lower - Rod/Strut: Guide Rod
- Length [mm]: 315
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left, Rear - Rod/Strut: Guide Rod
- Length [mm]: 298
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR GàRNY - Manufacturer: MEY
- Fitting Position: Rear Axle
- Rod/Strut: Pull Rod
- Material: Sheet Steel
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 821093510
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 245
- Thread Size: M10x1
- Material: Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: MEY
-
Fitting Position: Rear Axle,
Upper, both sides, Front - Rod/Strut: Pull Rod
- Article number of recommended accessories: 21685 01
- Manufacturer: LEMFORDER
- Name: LMI 2962901
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Rod/Strut: Camber Link
-
paired article number: V30-
7542 - Weight [kg]: 1.189
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Guide Rod
- Name: COC 49398571
- Manufacturer: CORTECO
- Quantity Unit: Set
- Fitting Position: Rear Axle Upper
- Rod/Strut: Pull Rod
- Supplementary Article/Info 2: with fastening material
-
paired article number: V30-
7131 - Weight [kg]: 0.826
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
- SVHC: No SVHC present!
-
Name: Stabilisaator,
kndmik - Manufacturer: FAG
-
Fitting Position: Rear Axle,
Upper, both sides, Rear - Rod/Strut: Camber Link
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR GàRNY KPL ZE RUBAMI
- Rod/Strut: Pull Rod
-
Fitting Position: Rear Axle,
both sides, Upper, Front -
Name: Stabilisaator,
kndmik - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Right,
Front, Rear Axle Left, Lower - Rod/Strut: Guide Rod
- Length [mm]: 315
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD KPL ZE RUBAMI
- Quantity Unit: Set
-
Fitting Position: both sides,
Rear Axle Upper -
paired article number: V30-
7138 - Rod/Strut: Camber Link
- Supplementary Article/Info 2: with fastening material
- Weight [kg]: 1.189
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
Lower, both sides, Front - Rod/Strut: Push Rod
- Article number of recommended accessories: 21685 01
- Manufacturer: LMI
- Lisainfo: 29630 01 LEM
- Additional information: 29630 01 LEM
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rod/Strut: Guide Rod
- Length [mm]: 245
- Thread Size: M10x1
- Supplementary Article/Supplementary Info: with accessories
- Material: Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR ZE RUB¤
-
Fitting Position: Upper,
Rear Axle Right, Rear, Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 298
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR GàRNY KPL ZE RUBAMI
-
Fitting Position: Front,
Rear Axle Left, Rear Axle Right, Upper - Rod/Strut: Pull Rod
- Length [mm]: 247
-
Guarantee: 3 years guarantee or up to 75,
000km - Manufacturer: METZGER
- Fitting Position: Rear Axle
- Rod/Strut: Camber Link
- Material: Sheet Steel
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 821093610
-
Fitting Position: Rear Axle,
Lower, both sides, Front - Rod/Strut: Push Rod
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD KPL ZE RUBAMI
- Fitting Position: Rear Axle
- Rod/Strut: Push Rod
- Material: Sheet Steel
- SVHC: No SVHC present!
-
Name: Stabilisaator,
kndmik - Manufacturer: FAG
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear, Lower - Rod/Strut: Guide Rod
- Length [mm]: 315
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Coupling Rod
- Manufacturer: CORTECO
-
Fitting Position: Rear Axle,
Upper, both sides, Rear -
Rod/Strut: Pull Rod,
Camber Link - Supplementary Article/Supplementary Info: with accessories
-
Name: STABILISAATOR,
KNDMIK - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks