Lisainfo: Control Arm-/Trailing Arm Bush

• Fitting Position: Rear Axle
• Required quantity: 2
• Material: Metal
• Rod/Strut: Coupling Rod
• Lisainfo: MERCEDES W124, W124 E-KLA
• Additional information: MERCEDES W124, W124 E-KLA

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Rod/Strut: Camber Link
• Manufacturer: CORTECO
• Name: COC 21652516

• Fitting Position: Rear Axle, both sides
• Rod/Strut: Coupling Rod
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Rod/Strut: Push Rod
• Weight [kg]: 0.08
• Name: COC 21652517
• Manufacturer: CORTECO

• Rod/Strut: Suspension Rod
• Material: Plastic
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: Ootshoovad - K„„ndmik DB T. W124/201/202/210 LE/PR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 200
• Thread Size 2: M10x1.5
• Material: Plastic
• Weight [kg]: 0.11
• Name: DY 30-72632
• Manufacturer: DYS

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 229
• Thread Size 1: M10x1,5
• Inner Diameter [mm]: 8
• Material: Plastic
• Required quantity: 2
• replacement in pairs recommended:
• Name: Ootshoovad - K„„ndmik DB T. W124/2
• Manufacturer: MEY

• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.2
• Required quantity: 2
• Material: PVC
• Rod/Strut: Coupling Rod
• Packaging length [cm]: 31
• Packaging width [cm]: 8
• Packaging height [cm]: 4
• Manufacturer: MONROE

• Vehicle configuration line / variant: Plastic
• Fitting Position: Rear Axle
• Weight [kg]: 0.118
• Rod/Strut: Coupling Rod
• Width [mm]: 40
• Height [mm]: 45
• max. length [mm]: 235
• Length [mm]: 222
• Material: Plastic
• Thread Size 1: M10x1,5
• Thread Size 2: 8,3
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERC.202 (C-180) 92-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MERC.202 (C-180) 92-
(kvaliteediklass: PJ)"

• Material: Metal, Steel
• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Coupling Rod
• Quantity Unit: Set
• Length from [mm]: 200
• Thread Size 1: MM10x1,5R
• Quality class: PJ
• Name: Stabilizer link left=right

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without level control
• Rod/Strut: Coupling Rod
• Material: Plastic
• Length [mm]: 200
• SVHC: No SVHC present!
• Name: Stabilisaator,Stabilisaator
• Manufacturer: FAG

• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Braking/Drive Dynamics: for vehicles with ABS
• Length [mm]: 200
• Thread Size: MM10X1.5 RHT
• Material: Plastic
• Rod/Strut: Suspension Rod
• paired article number: 260084
• Weight [kg]: 0.118
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Coupling Rod
• Manufacturer: CORTECO ZAWIESZENIE

• Vehicle configuration line / variant: Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.197
• Rod/Strut: Coupling Rod
• Width [mm]: 42
• Height [mm]: 48
• max. length [mm]: 226
• Material: Steel
• Thread Size 1: M10x1,5
• Thread Size 2: 8,4
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MB W124/210
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
MB W124/210
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Suspension Rod
• Material: Plastic
• Supplementary Article/Supplementary Info: with accessories
• Name: Ootshoovad - K„„ndmik DB T. W124/2
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 245
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Material: Metal
• Thread Size 1: M10x1.5
• Rod/Strut: Coupling Rod
• paired article number: TC2119
• Width [mm]: 50
• Height [mm]: 45
• Length [mm]: 200
• Manufacturer: DELPHI
• Name: DE TC2119

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 200
• Thread Size 2: M10x1.5
• Manufacturer: PROFIPOWER

• Length [mm]: 200
• External Thread Size: M10 x 1,5
• Material: Metal
• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle
• Weight [kg]: 0.181
• Observe service information:
• Name: Ootshoovad - K„„ndmik DB T. W124 KOMBI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 124 320 0489
• Fitting Position: Rear Axle both sides
• Rod/Strut: Coupling Rod
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 200
• Thread Size 1: M10x1,5
• Inner Diameter [mm]: 8.3
• Material: Metal
• Required quantity: 2
• replacement in pairs recommended:
• Name: Ootshoovad - K„„ndmik DB T. W124 KOMBI
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, Lower
• Rod/Strut: Coupling Rod
• Length [mm]: 247
• Net weight [kg]: 0.72
• Name: Ootshoovad - K„„ndmik DB T. W124/201
• Manufacturer: NK

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with level control
• Rod/Strut: Coupling Rod
• Material: Steel
• Length [mm]: 200
• Width [mm]: 48
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Guide Rod
• Manufacturer: JP GROUP
• Lisainfo: Track control arm, lower, rear
• Additional information: Track control arm, lower, rear

• Fitting Position: Front Axle
• Rod/Strut: Push Rod
• Quantity Unit: Set
• Quality class: PJ
• Name: Tension rod left=right

• Fitting Position: Rear Axle both sides
• Required quantity: 2
• paired article number: VKDS 448006
• Rod/Strut: Coupling Rod
• Manufacturer: SKF
• Name: SK VKDS448006

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Pull Rod
• Length [mm]: 247
• Material: Sheet Steel
• Quantity Unit: Piece
• Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR
• Manufacturer: MAX

Lisainfo: Track control arm, rear

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Suspension Rod
• Material: Plastic
• Name: COC 49400126
• Manufacturer: CORTECO

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Material: Metal
• Length [mm]: 200
• Thread Size: M10x1.5
• Pipe Diameter [mm]: 9
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Lower, Rear Axle Left, Rear Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 247
• Name: Ootshoovad - K„„ndmik DB T. W124/201
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Suspension Rod
• Material: Metal
• Name: Ootshoovad - K„„ndmik DB T. W124 KOMB
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 313
• Control/Trailing Arm Type: Semi-Trailing Arm
• Net weight [kg]: 0.87
• Manufacturer: NK

Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR DOLNY PRZàD

• Fitting Position: Rear Axle Upper, inner
• Control/Trailing Arm Type: Control Arm
• Rod/Strut: Push Rod
• Manufacturer: GSP ZAWIESZENIE

Lisainfo: Track control arm, upper, rear

• Fitting Position: Upper, Rear Axle Right, Front, Rear Axle Left
• Rod/Strut: Guide Rod
• Length [mm]: 247
• Material: Sheet Steel
• replacement in pairs recommended:
• Required quantity: 2
• Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR
• Manufacturer: MEY

• Fitting Position: Rear Axle, Upper, both sides, Rear
• Rod/Strut: Camber Link
• Article number of recommended accessories: 21685 01
• Manufacturer: LEMFORDER
• Name: LMI 2963101

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 300
• Control/Trailing Arm Type: Semi-Trailing Arm
• Net weight [kg]: 0.76
• Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR GàRNY
• Manufacturer: NK

• Fitting Position: Rear Axle, Upper
• Rod/Strut: Pull Rod
• Alternative Repair Kit: V30-7541
• Weight [kg]: 0.828
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 210 350 3306
• Fitting Position: Rear Axle both sides
• Rod/Strut: Pull Rod
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Rod/Strut: Pull Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: Stabilisaator,k„„ndmik
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 370, 63
• Height [mm]: 40
• Fitting Position: Rear Axle, Lower
• Weight [kg]: 0.858
• Rod/Strut: Push Rod
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Upper, Rear Axle Right, Front, Rear Axle Left
• Rod/Strut: Guide Rod
• Length [mm]: 247
• Supplementary Article/Supplementary Info: with accessories
• Material: Sheet Steel
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR KPL ZE —RUBAMI

• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle Right, Rear Axle Left, Front, Lower
• Rod/Strut: Guide Rod
• Length [mm]: 315
• Material: Sheet Steel
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEY

Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR DOLNY PRZàD

• Fitting Position: Upper, Rear Axle Right, Rear Axle Left, Rear
• Rod/Strut: Guide Rod
• Length [mm]: 298
• Material: Sheet Steel
• replacement in pairs recommended:
• Required quantity: 2
• Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR GàRNY
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Rod/Strut: Pull Rod
• Material: Sheet Steel
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 821093510

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Guide Rod
• Length [mm]: 245
• Thread Size: M10x1
• Material: Steel
• replacement in pairs recommended:
• Required quantity: 2
• Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR
• Manufacturer: MEY

• Fitting Position: Rear Axle, Upper, both sides, Front
• Rod/Strut: Pull Rod
• Article number of recommended accessories: 21685 01
• Manufacturer: LEMFORDER
• Name: LMI 2962901

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Rod/Strut: Camber Link
• paired article number: V30-7542
• Weight [kg]: 1.189
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Guide Rod
• Name: COC 49398571
• Manufacturer: CORTECO

• Quantity Unit: Set
• Fitting Position: Rear Axle Upper
• Rod/Strut: Pull Rod
• Supplementary Article/Info 2: with fastening material
• paired article number: V30-7131
• Weight [kg]: 0.826
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: Control arm left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Rod/Strut: Coupling Rod
• SVHC: No SVHC present!
• Name: Stabilisaator,k„„ndmik
• Manufacturer: FAG

• Fitting Position: Rear Axle, Upper, both sides, Rear
• Rod/Strut: Camber Link
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR GàRNY KPL ZE —RUBAMI

• Rod/Strut: Pull Rod
• Fitting Position: Rear Axle, both sides, Upper, Front
• Name: Stabilisaator,k„„ndmik
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Rod/Strut: Camber Link
• Length [mm]: 298
• Material: Sheet Steel
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: with fastening material
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle, Upper
• Rod/Strut: Guide Rod
• Material: Metal
• Length [mm]: 297
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Right, Front, Rear Axle Left, Lower
• Rod/Strut: Guide Rod
• Length [mm]: 315
• Supplementary Article/Supplementary Info: with accessories
• Material: Sheet Steel
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR DOLNY PRZàD KPL ZE —RUBAMI

• Quantity Unit: Set
• Fitting Position: both sides, Rear Axle Upper
• paired article number: V30-7138
• Rod/Strut: Camber Link
• Supplementary Article/Info 2: with fastening material
• Weight [kg]: 1.189
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Lower, both sides, Front
• Rod/Strut: Push Rod
• Article number of recommended accessories: 21685 01
• Manufacturer: LMI
• Lisainfo: 29630 01 LEM
• Additional information: 29630 01 LEM

SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR DOLNY PRZàD

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rod/Strut: Guide Rod
• Length [mm]: 245
• Thread Size: M10x1
• Supplementary Article/Supplementary Info: with accessories
• Material: Steel
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR ZE —RUB¤

• Fitting Position: Upper, Rear Axle Right, Rear, Rear Axle Left
• Rod/Strut: Guide Rod
• Length [mm]: 298
• Supplementary Article/Supplementary Info: with accessories
• Material: Sheet Steel
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR GàRNY KPL ZE —RUBAMI

• Fitting Position: Front, Rear Axle Left, Rear Axle Right, Upper
• Rod/Strut: Pull Rod
• Length [mm]: 247
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Rod/Strut: Camber Link
• Material: Sheet Steel
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 821093610

• Fitting Position: Rear Axle, Lower, both sides, Front
• Rod/Strut: Push Rod
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - K„„ndmik DB T. W124/201 LE/PR DOLNY PRZàD KPL ZE —RUBAMI

• Fitting Position: Rear Axle Upper, Rear, both sides
• Rod/Strut: Guide Rod
• Length [mm]: 297
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Rod/Strut: Push Rod
• Material: Sheet Steel
• SVHC: No SVHC present!
• Name: Stabilisaator,k„„ndmik
• Manufacturer: FAG

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear, Lower
• Rod/Strut: Guide Rod
• Length [mm]: 315
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Right, Rear Axle Left
• Rod/Strut: Coupling Rod
• Manufacturer: CORTECO

• Fitting Position: Rear Axle, Upper, both sides, Rear
• Rod/Strut: Pull Rod, Camber Link
• Supplementary Article/Supplementary Info: with accessories
• Name: STABILISAATOR,KŽŽNDMIK
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!