• Length [mm]: 56.6
• Weight [kg]: 0.036
• Thread Size: M14x1,5
• Switch Point [°C]: 120
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour Coding: black
• Number of pins: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 005 542 10 17
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Weight [g]: 38
• Guarantee: 3 years guarantee
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Engine Code: M 104.942
• Engine Number from: 005790,048697
• Manufacturer: FACET

• Transmission Type: Manual Transmission, Automatic Transmission
• Engine Number from: 005790, 048697
• Block Separation:
• Connector Shape: oval
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M 104.942
• Engine Number from: 005790,048697
• Manufacturer: EPS
• Additional information: 1-994-014
• Lisainfo: 1-994-014

• Engine Code: M 104.942
• Thread Size: M14x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: M 104.942
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: EP 1.830.088
• Manufacturer: EPS

Manufacturer: FAST

• Engine Number from: 005790, 005890, 048697
• Transmission Type: Manual Transmission, Automatic Transmission
• Block Separation:
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV682

• Engine Number from: 048697
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• Length [mm]: 52
• for OE number: 6511530028
• Manufacturer: MEAT&DORIA

• Engine Number from: 005890, 048697
• Transmission Type: Manual Transmission, Automatic Transmission
• Block Separation:
• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 07.1993
• Transmission Type: Manual Transmission
• Engine Number from: ..006332
• Construction Year to: 05.1996
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Manual Transmission, Automatic Transmission
• Engine Number to: 005789, 048696
• Block Separation:
• Connector Shape: round
• Number of pins: 1
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Transmission Type: Manual Transmission, Automatic Transmission
• Fabrication Number: ESS-PE-000
• Manufacturer: NTY

• Connector Shape: round
• Number of connectors: 2
• Manufacturer: ERA

• Engine Number from: 005790, 048697
• Sensor Type: NTC Sensor
• Housing Colour: black
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Connector Shape: oval
• Manufacturer: ERA

Manufacturer: FAE

• Engine Code: M 104.942
• Engine Number to: 005789,048696
• Colour: black
• Thread Size: M14x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Engine Code: M 104.942
• Engine Number to: 005789,048696
• Colour: black
• Thread Size: M14x1,5
• Spanner Size: 22
• Name: EP 1.830.183
• Manufacturer: EPS

• Number of pins: 1
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Engine Number from: 005890
• Transmission Type: Manual Transmission
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: M 104.942
• Engine Number to: 005789,048696
• Colour: bright blue
• Thread Size: M14x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Number of pins: 2
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: M 104.942
• Engine Number to: 005789,048696
• Colour: bright blue
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: EP 1.830.139
• Manufacturer: EPS

• Engine Number from: ..006332
• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 594621
• Manufacturer: MEAT&DORIA

• Engine Code: M 104.942
• Engine Number from: 005790,048697
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: MEYLE

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Engine Code: M 104.942
• Engine Number from: 005790,048697
• Thread Size: M14x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Thread Size: M 14x1,5
• Sensor Type: NTC Sensor
• Number of pins: 4
• Housing Colour: black
• Manufacturer: FAE

• Construction Year to: 01.1996
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 594623
• Manufacturer: MEAT&DORIA

• Thread Size: M14x1,5
• Colour: blue
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Weight [kg]: 0.037
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Transmission Type: Automatic Transmission, Manual Transmission
• Engine Number from: ..056025, ..006332
• Block Separation:
• Manufacturer: BOSCH

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Transmission Type: Automatic Transmission, Manual Transmission
• Engine Number from: ..056025, ..006332
• Block Separation:
• for OE number: 5946,23
• Weight [kg]: 0.049
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 24
• Alternative Repair Kit: 550369
• Resistor [kOhm]: 1.1
• Manufacturer: ERA

• Engine Code: M 104.942
• Engine Number from: 006332,056025
• Manufacturer: FACET

• Number of pins: 2
• Connector Shape: round
• Plug Type: Round Connector Sleeve
• Supplementary Article/Info 2: without cable
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 24
• Number of mounting bores: 2
• for OE number: 0021539528
• Manufacturer: MEAT&DORIA

• Engine Number from: 005790, 048697
• Transmission Type: Manual Transmission, Automatic Transmission
• Block Separation:
• Length [mm]: 45
• Thickness [mm]: 18
• Inner Diameter [mm]: 8
• Number of connectors: 2
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 104.942
• Engine Number from: 006332,056025
• Manufacturer: EPS

• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SS10936

• Engine Code: M 104.942
• Manufacturer: FACET

• Engine Code: M 104.942
• Name: EP 1.953.112
• Manufacturer: EPS

• Engine Code: 104.942 10/50, 20/60, 104.942 12/52, 22/62
• Engine Number from: 005790, 048697
• Block Separation:
• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M14x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PT009309251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Length [mm]: 52.3
• Width [mm]: 57
• Number of connectors: 2
• Hole Spacing [mm]: 38
• Weight [kg]: 0.039
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 52.3
• Width [mm]: 57
• Number of connectors: 2
• Hole Spacing [mm]: 38
• Weight [kg]: 0.039
• Name: SW 10 93 2421
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 07.1993
• Construction Year to: 02.1996
• Alternatively:
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Engine Number from: 005790/048697
• Number of pins: 2
• Manufacturer: DELPHI

• Voltage [V]: 12
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Number from: 005790, 048697
• Transmission Type: Manual Transmission, Automatic Transmission
• Block Separation:
• Length [mm]: 69
• Width [mm]: 20
• Thickness [mm]: 35
• Number of connectors: 2
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.1995
• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: M 104.942
• Cable Length [mm]: 755
• Manufacturer: DELPHI
• Name: DE ES10276-12B1

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Required quantity: 1
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.36
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Transmission Type: Automatic Transmission, Manual Transmission
• Engine Number from: --056025, --006332
• Block Separation:
• Number of pins: 2
• Corresponds to the original part in colour: black, white
• Manufacturer: METZGER

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Quality class: PJ
• Name: Air flow sensor

• Construction Year to: 06.1995
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 770
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV612

• for OE number: 0003122V005
• Oxygen Sensor: Heated
• External Thread [mm]: M18 x 1,5
• Number of circuits: 4
• Manufacturer: TRUCKTEC

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986503

• Construction Year from: 08.1993
• Construction Year to: 10.1995
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Number of pins: 4
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air meter
• Additional information: Air meter

• Oxygen Sensor: Heated, Regulating Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 3
• Fitting Position: before catalytic converter
• Cable Length [mm]: 770
• Weight [kg]: 0.119
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 795
• Manufacturer: BOSCH

• Engine Code: M 104.942
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Construction Year from: 07.1993
• Construction Year to: 05.1996
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Connector Shape: round
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring