• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 97
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

• Length [mm]: 95
• Wear Warning Contact: Change warning contact together with the pads
• Fabrication Number: HCZ-ME-001
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Length [mm]: 980
• Socket colour: black
• Manufacturer: JP GROUP

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,085
• Socket colour: black
• Manufacturer: JP GROUP

• for OE number: K05103534AA
• Spanner Size: 19
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

Manufacturer: FAST

• Fabrication Number: ECT-ME-004
• Manufacturer: NTY
• Name: NTY ECT-ME-004

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: FAST

• Engine Code: OM 651.921
• Required quantity: 1
• Manufacturer: FACET

• Thread Size: 9 mm
• Number of connectors: 2
• Manufacturer: VERNET

• Housing Colour: black
• Number of pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Thread Size: 15 mm
• Manufacturer: VERNET

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV682

Manufacturer: FAST

• Engine Code: OM 651.921
• for article number: 7.8776, 7.8875
• Manufacturer: FACET

• Engine Code: OM 651.921
• for article number: 1.880.776, 1.880.875
• Name: EP 1.830.343
• Manufacturer: EPS

• for OE number: 05080352AA
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Thread Size: 9 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Manufacturer: HELLA
• Name: HE 6PT358058191

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M14 x 1,5
• Manufacturer: ERA

• Fitting Position: both sides, Rear, outer, Front, inner, Centre
• Fabrication Number: EPDC-ME-009
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clip
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: OM 651.921
• Thread Size: M14x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Thickness [mm]: 52
• Outer Diameter [mm]: 10
• Number of connectors: 2
• Weight [kg]: 0.005
• Name: SW 10 93 7142
• Manufacturer: SWAG
• Lisainfo: 10 93 7142 SWA
• Additional information: 10 93 7142 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: OM 651.921
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: EP 1.830.350
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 2
• Manufacturer: MEYLE

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Thickness [mm]: 51
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: black
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Fitting Position: Rear, Front
• Manufacturer: YSPARTS

• Thickness [mm]: 51
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Supplementary Article/Info 2: with seal ring
• Name: SW 10 93 7059
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 960
• Overall Length [mm]: 1,010
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Sensor Type: Passive sensor, Inductive Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Required quantity: 1
• Mounting Type: Bolted
• Manufacturer: FAST

• Quality class: PJ

Lisainfo: (kvaliteediklass PJ)

• for OE number: 003 153 8628
• Manufacturer: TRUCKTEC

• Fitting Position: Front, inner
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Chemical Properties: Paintable
• for OE number: 5Q0919275B
• Manufacturer: DELLO AUTOMEGA

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Fabrication Number: ECP-ME-008
• Manufacturer: NTY

• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV015

Fitting Position: Left, Longitudinal, Right, inner, outer, Front, Rear

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: MM SDP107
• Manufacturer: MAGNETI MARELLI

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,000
• Socket colour: black
• Manufacturer: JP GROUP

• Fitting Position: Front Axle Left
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 955
• Overall Length [mm]: 1,050
• Braking/Driving Dynamics: for vehicles with ABS
• paired article number: 638 680
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Quality: OE EQUIVALENT
• for OE number: 2E0906051A
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• for OE number: 5080350AA
• Manufacturer: MEAT&DORIA

• Fitting Position: Front, Rear
• Manufacturer: FAST

• Cable Length [mm]: 915
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: KAMOKA

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front, inner
• Number of connectors: 3
• Colour: black
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Number of pins: 3
• Name: DE SS12309-12B1
• Manufacturer: DELPHI

• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Name: DE SS12020-12B1
• Manufacturer: DELPHI

• Fitting Position: Front, Rear
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV096

• Fitting Position: Front Axle Right
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS21330-12B1
• Manufacturer: DELPHI

• for OE number: A0035421819
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: ECM-ME-004
• Manufacturer: NTY

• Vehicle Equipment: for vehicles without start-stop function
• Number of pins: 2
• Manufacturer: FAE

• Vehicle Equipment: for vehicles without start-stop function
• Length [mm]: 40
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550275
• Resistor [kOhm]: 1
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Fabrication Number: EBP-ME-001
• Manufacturer: NTY
• Name: NTY EBP-ME-001

• for OE number: A0005408250
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 955
• Name: DE SS20830
• Manufacturer: DELPHI
• Additional information: DE SS20830
• Lisainfo: DE SS20830

• for OE number: 205 905 8103
• Fitting Position: Front Axle Left
• Manufacturer: TRUCKTEC

• Sensor Type: Hall Sensor, Active sensor
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: A0005404716
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 205 905 8003
• Fitting Position: Front Axle Right
• Manufacturer: TRUCKTEC

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• for OE number: 205 905 8503
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Guarantee: 3 years guarantee
• Frequency Range [MHz]: 433
• Programmed:
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168771

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 955
• Overall Length [mm]: 1,050
• Braking/Driving Dynamics: for vehicles with ABS
• paired article number: 638 679
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Pressure from [kPA]: 10
• Name: DE PS10140
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Overall Length [mm]: 1,015
• Length [mm]: 38
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 925
• paired article number: 31402
• Weight [kg]: 0.09
• Manufacturer: A.B.S.

• Length [mm]: 42
• Width [mm]: 48
• Thickness [mm]: 35
• Inner Diameter [mm]: 6.5
• Number of connectors: 3
• Hole Spacing [mm]: 34
• Weight [kg]: 0.014
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: behind turbocharger
• Required quantity: 1
• Manufacturer: BREMI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: OM 651.921
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Manufacturer: FACET

• Weight [kg]: 0.05
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV327

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Connector Shape: oval
• Rated Voltage [V]: 12
• Manufacturer: ERA

• Engine Code: OM 651.921
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Name: EP 1.993.175
• Manufacturer: EPS

• Manufacturer: BOSCH
• Name: BS 0261230189

• Manufacturer: BOSCH
• Name: BS 0261230439

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Pressure from [kPA]: 50
• Name: DE PS20077-12B1
• Manufacturer: DELPHI

• Engine Code: OM 651.921
• Manufacturer: FACET

• Length [mm]: 42
• Width [mm]: 48
• Thickness [mm]: 35
• Inner Diameter [mm]: 6.5
• Number of connectors: 3
• Hole Spacing [mm]: 34
• Weight [kg]: 0.014
• Name: SW 10 93 8293
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: OM 651.921
• Exhaust System: before turbocharger
• alternative OE number: 0051535028
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Output Voltage, from [V]: 0.503
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Power [W]: 0.035
• Manufacturer: METZGER

• Engine Code: OM 651.921
• Exhaust System: before turbocharger
• alternative OE number: 0051535028
• Pressure from [kPA]: 10
• Pressure to [kPA]: 127
• Output Voltage, from [V]: 0.503
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.106
• Manufacturer: EPS

• for OE number: 009 153 52 28
• Number of connectors: 3
• Fabrication Number: ECS-ME-003
• Manufacturer: NTY