Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Filter type: Filter Insert
- Transmission Code: 7G TRONIC
-
Transmission Type: 7-
Speed Automatic Transmission - Width [mm]: 173
- Height [mm]: 55
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: KAMOKA
-
Transmission Type: 7-
Speed Automatic Transmission - Block Separation:
-
Filter type: Screen Filter,
Suction Filter -
Supplementary Article/Supplementary Info: without gasket/
seal - Housing Type: Metal Housing
- Observe system fill quantity:
- Manufacturer: TOPRAN HANS PRIES
Transmission ID: 722.965, 722.968, 722.969, 722.972, 722.993, 722.994, 722.902, 722.908 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission number to: 2834526
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Filter type: Screen Filter
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 52
- not for special equipment code: A89
- Weight [kg]: 0.361
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission number to: 2834526
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Filter type: Screen Filter
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 52
- not for special equipment code: A89
- Weight [kg]: 0.361
- Name: SW 10 92 4538
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filtritüüp: Filtrer
- Kastitüüp: 722.9 ECO
- Käigukasti liik: automaatkast 7 käiku
- Piirangutega toode/piirangu info: koos tihendiga
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Käigukasti liik: automaatkast 7 käiku
- Filtritüüp: Filtrer
- lisaks vajaminevaid tooteid vaata Lisadenimekirjast:
-
Seerianumber: FSF-
ME- 004 - Manufacturer: NTY
-
Name: NTY FSF-
ME- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Code: 722.908/
965, 722.9.., W7B/ C/ N/ X, K7C -
Transmission Type: 7-
Speed Automatic Transmission - Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: ELRING
- Additional information: 097.550 ELRING
- Lisainfo: 097.550 ELRING
- Filter type: Screen Filter
-
Seal Material: ACM
(Polyacrylate) - Weight [kg]: 0.438
-
Supplementary Article/Info 2: with oil sump gasket,
with overflow pipe - Manufacturer: FEBI
- Lisainfo: 44530 FEBI
- Additional information: 44530 FEBI
Transmission Type: 7-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission ID: 722.908,
722.965, 722.994, 722.995 - Specification: MB236.15
- Filtritüüp: Filtrer
-
Kastitüüp: 722,
9, 7G- Tronic Plus - Käigukasti liik: automaatkast 7 käiku
-
Piirangutega toode/piirangu info: koos lisadega,
koos tihendiga, ilma juhtpoldita - Piirangutega toode/piirangu info 2: ilma mutrita
- Quality class: PJ
- Name: Automatic transmission filter
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Transmission number from: 2834527
- Pikkus (mm): 267
-
Kaal (kg): 0,
696 - OE-numbri jaoks: 222 277 20 00 S1
- Laius (mm): 174
- Kõrgus (mm): 56
- Piirangutega toode/piirangu info 2: õlivannitihendiga
- Manufacturer: DENCKERMANN FILTRY
- Filtritüüp: Filtrer
- Kõrgus (mm): 58
- Pikkus (mm): 268
- Laius (mm): 175
- Manufacturer: PURFLUX
- Transmission number from: 2834527
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 56
- for special equipment code: A89
- Weight [kg]: 0.356
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filtritüüp: Filtrer
- Pikkus (mm): 268
- Laius (mm): 175
- Kõrgus (mm): 58
- Manufacturer: HENGST FILTRY
- Lisainfo: EG841H D449
- Additional information: EG841H D449
- Transmission number from: 2834527
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 56
- for special equipment code: A89
- Weight [kg]: 0.356
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: BLUE PRINT FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission number from: 2834527
-
Transmission Type: 7-
Speed Automatic Transmission - Transmission ID: 722.9
- Length [mm]: 267
- Width [mm]: 174
- Height [mm]: 56
- for special equipment code: A89
- Weight [kg]: 0.356
- Supplementary Article/Info 2: with oil sump gasket
- Name: SW 10 10 7823
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Length [mm]: 267.5
- Width [mm]: 175
- Height [mm]: 54.5
- Inner Diameter 2 [mm]: 28
-
Transmission Type: 7-
Speed Automatic Transmission -
Transmission Code: 722.9,
7G- Tronic Plus -
Supplementary Article/Supplementary Info: with gasket/
seal - Gasket Design: Soft Material Gasket
-
Recommended change interval [km]: 50,
000 - Packaging width [cm]: 18
- Packaging length [cm]: 27.5
- Net Weight [g]: 552
- Packaging height [cm]: 6.5
- Name: KN HX230KIT
- Manufacturer: KNECHT
-
Transmission Code: 722.908/
965, 722.9.., W7B/ C/ N/ X, K7C -
Vehicle Equipment: for vehicles with start-
stop function - Oil manufacturer recommendation: ATF FE MB 236.15
-
Transmission Type: 7-
Speed Automatic Transmission -
Supplementary Article/Info 2: with oil sump gasket,
with bolts/ screws - Manufacturer: ELRING
-
Transmission ID: 722.994,
722.995, 722.908, 722.965 - for PR number: A89
-
Transmission Code: 722,
9, 7G- Tronic Plus -
Transmission Type: 7-
Speed Automatic Transmission - See accessories list for additionally required parts:
- Filter type: Filter Insert
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Hulgaühik: Komplekt
- Käigukasti liik: automaatkast 7 käiku
- Piirangutega toode/piirangu info: koos lisadega
- Kastitüüp: 722.9 ECO
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: OM 651.950
-
Transmission ID: 725.005,
725.019, 725.055 - Block Separation:
- Filter type: Screen Filter
- Length [mm]: 437
- Width [mm]: 300
- Height [mm]: 122
- Weight [kg]: 1.235
- Manufacturer: FEBI
Transmission Type: 9-Speed Automatic Transmission, Automatic Transmission Supplementary Article/Supplementary Info: with gasket/seal, Oil sump with permanently integrated filter element General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission ID: 722.9
- Weight [kg]: 0.084
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: OM 651.950
-
Transmission ID: 725.005,
725.019, 725.055 - Block Separation:
- Filter type: Screen Filter
- Length [mm]: 437
- Width [mm]: 300
- Height [mm]: 122
- Weight [kg]: 1.235
- Observe service information:
- Manufacturer: BLUEPRINT
Transmission Type: 9-Speed Automatic Transmission, Automatic Transmission Supplementary Article/Supplementary Info: with gasket/seal, Oil sump with permanently integrated filter element General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission ID: 722.994,
722.995, 722.908, 722.965 -
Transmission Type: 7-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gasket/
seal, with accessories - for PR number: A89
-
Transmission Code: 722,
9, 7G- Tronic Plus -
Supplementary Article/Info 2: with bolts/
screws - See accessories list for additionally required parts:
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: OM 651.950
-
Transmission Type: 9-
Speed Automatic Transmission - Transmission ID: 725.005
- Pikkus (mm): 437
-
Kaal (kg): 1,
235 - Laius (mm): 300
- Kõrgus (mm): 122
- Piirangutega toode/piirangu info: koos tihendiga
- Filtritüüp: Sõelfilter
- Manufacturer: DENCKERMANN FILTRY
- Engine Code: OM 651.950
-
Transmission Type: 9-
Speed Automatic Transmission -
Transmission ID: 725.005,
725.019, 725.055 - Block Separation:
- Filter type: Screen Filter
- Length [mm]: 437
- Width [mm]: 300
- Height [mm]: 122
- Weight [kg]: 1.275
-
Supplementary Article/Info 2: with bolts/
screws - Observe service information:
- Manufacturer: BLUE PRINT SILNIK
Supplementary Article/Supplementary Info: with gasket/seal, Oil sump with permanently integrated filter element General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission ID: 722.994,
722.995, 722.908, 722.965 - Housing Colour: black
-
Transmission Code: 722,
9, K2, EPC, B1, K3 -
Transmission Type: 7-
Speed Automatic Transmission - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 2202771098
- Manufacturer: MEAT & DORIA
- Core Length [mm]: 405
- Core Width [mm]: 122
- Core Depth [mm]: 20
- Radiator type: Brazed cooling fins
-
Transmission Type: 7-
Speed Automatic Transmission - Manufacturer: MAHLE
- Inlet Ø [mm]: 10
- Outlet Ø [mm]: 10
-
Supplementary Article/Supplementary Info: without gasket/
seal - Packaging width [cm]: 10.8
- Packaging length [cm]: 20.8
- Packaging height [cm]: 61.6
- Net Weight [g]: 737
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 405
- Core Width [mm]: 122
- Core Depth [mm]: 20
- Packaging length [cm]: 62
- Packaging width [cm]: 21
- Packaging height [cm]: 11
- Weight [kg]: 1.2
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks