• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: FAST

• Thread Size: 9 mm
• Number of connectors: 2
• Manufacturer: VERNET

• Housing Colour: black
• Number of pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Engine Code: M 276.823
• for article number: 7.8776, 7.8875
• Manufacturer: FACET

• Engine Code: M 276.823
• for article number: 1.880.776, 1.880.875
• Name: EP 1.830.343
• Manufacturer: EPS

• Thread Size: 9 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Manufacturer: HELLA
• Name: HE 6PT358058191

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Fitting Position: Rear Axle Right
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Fitting Position: Left, Right, inner, outer, Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV014

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Fabrication Number: ECP-ME-008
• Manufacturer: NTY

• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV015

Fitting Position: Left, Longitudinal, Right, inner, outer, Front, Rear

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP107

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right, inner, outer, Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV071

Manufacturer: BOSCH

• Number of pins: 3
• Fabrication Number: ECM-ME-002
• Manufacturer: NTY

• Number of pins: 3
• Name: DE SS12020-12B1
• Manufacturer: DELPHI

• Required quantity: 4
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358380741
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 625
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

• Cable Length [mm]: 670
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• for OE number: A0005408250
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: A0005404716
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Manufacturer: VDO

• Guarantee: 3 years guarantee
• Frequency Range [MHz]: 433
• Programmed:
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168771

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Weight [kg]: 0.05
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV327

• Manufacturer: BOSCH
• Name: BS 0261230506

• Fitting Position: Charge Air Cooler
• Connector Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: M 276.823
• Manufacturer: FACET

• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ERA

• paired article number: 172427
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 625
• Weight [kg]: 0.044
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 172518
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 670
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 5
• Manufacturer: DELPHI ELEKTRONIKA

• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel

• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00468

• paired article number: 33 10 1362
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 670
• Weight [kg]: 0.045
• Name: SW 33 10 1323
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Fitting Position: both sides, outer, Front
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: mounting
• Socket colour: black
• Assy./disassy. by qualified personnel required!:
• Sensor Type: Ultrasonic Sensor
• Name: HE 6PX358270401
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: VDO

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: grey
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Fitting Position: outer, inner, both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year to: 06.2020
• Frequency Range [MHz]: 433
• Valve colour: silver
• Tightening Torque [Nm]: 8
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Housing Colour: black/white
• Manufacturer: SKF
• Name: SK VKRA110019

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: Titanium
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Housing Colour: Orange
• Mounting Type: Bolted
• Manufacturer: BH SENS HUF

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139461
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Required quantity: 6
• Fitting Position: both sides, Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PX358141261

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP358139471

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358139481
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: silver
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Fitting Position: Rear Axle Right
• Length [mm]: 708
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Left, Rear Axle
• Required quantity: 1
• Number of pins: 2
• Cable Length [mm]: 713
• Sensor Type: Active sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358216201
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left
• Length [mm]: 751
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front, inner
• for special equipment code: 722+235
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of pins: 3
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Surface: primed
• Number of pins: 3
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV930
• Lisainfo: 17SKV930 SKV
• Additional information: 17SKV930 SKV

• Fitting Position: Rear Axle Right
• Length [mm]: 708
• Sensor Type: Active sensor
• paired article number: GBS2636
• Manufacturer: TRW

• Fitting Position: Rear Axle Left
• Length [mm]: 751
• Sensor Type: Active sensor
• paired article number: GBS2637
• Manufacturer: TRW

• Number of pins: 2
• Fabrication Number: EPO-ME-008
• Manufacturer: NTY

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Manufacturer: BOSCH

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year to: 08.2020
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Weight [kg]: 0.07
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV329

• Fitting Position: outer, inner, Left, Right, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 32
• Width [mm]: 23
• Height [mm]: 35.9
• Number of pins: 3
• Diameter [mm]: 15.5
• Manufacturer: VALEO
• Name: VA 890007

• Programmed:
• Tightening Torque [Nm]: 4
• Assy./disassy. by qualified personnel required!:
• not for vehicle production country: USA
• Manufacturer: HELLA

Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Required quantity: 6
• Fitting Position: both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 23
• Height [mm]: 28.7
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: VA 890019
• Manufacturer: VALEO
• Additional information: 890019 VALEO
• Lisainfo: 890019 VALEO

• Number of pins: 4
• Connector Shape: oval
• Socket colour: black
• Fuel Type: Petrol
• Supplementary Article/Info 2: High Pressure Side
• for OE number: 2781530728
• Manufacturer: MEAT&DORIA

• Required quantity: 2
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 23
• Height [mm]: 28.7
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: VA 890010
• Manufacturer: VALEO

Fitting Position: outer, both sides, Front, Rear, lateral installation

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PR008891011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 276.823
• Fitting Position: Left Front, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 450
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.468
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Fitting Position: Front Axle
• Length [mm]: 1,681
• Sensor Type: Active sensor
• Manufacturer: TRW

• Engine Code: M 276.823
• Fitting Position: Right Front, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Engine Code: M 276.823
• Fitting Position: Right Front, before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.464
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Engine Code: 276.823
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Name: VA 368396
• Manufacturer: VALEO

Oxygen Sensor: Planar probe, Broadband oxygen sensor, Thread pre-greased, Heated

• Engine Code: 276.823
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO
• Name: VA 368402

Oxygen Sensor: Planar probe, Broadband oxygen sensor, Thread pre-greased, Heated