• Engine Code: M 111.948
• Pikkus (mm): 205
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear, front/rear
• Additional information: Sensor, brake lining wear, front/rear

Installatsiooni pool: esisild vasakul, esisild paremal, Tagasild vasakul, Tagasild paremal

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Pikkus (mm): 120
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Netokaal [kg]: 0,01
• Lisainfo: .
• Additional information: .

• Installatsiooni pool: Esisild
• Pidurisüsteem: Bosch
• Kõrgus (mm): 64,5
• Laius (mm): 135
• Jämedus/Tugevus (mm): 20,9
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Installatsiooni pool: Esisild
• Pidurisüsteem: Teves
• Kõrgus (mm): 64,8
• Laius (mm): 156
• Jämedus/Tugevus (mm): 20,7
• Kulumishoiatus kontakt: koos kulumianduriga
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 20.7 mm
• Additional information: Brake pad set, front, 20.7 mm

• Piduriliik: Ketaspidur
• Pikkus (mm): 120
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Installatsiooni pool: Esisild
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Fitting Position: Front Axle
• Required quantity: 2
• Construction Year from: 03.1996
• Brake Type: Disc Brake
• Length 1 [mm]: 99
• Length 2 [mm]: 167
• Manufacturer: DENCKERMANN HAMULCE

• Fitting Position: Front Axle
• Required quantity: 2
• Construction Year from: 03.1996
• Brake Type: Disc Brake
• Length 1 [mm]: 115
• Length 2 [mm]: 185
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Pikkus (mm): 215
• Kulumishoiatus kontakt: Detektor muutuda piduriklotsid
• Piduriliik: Ketaspidur
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pikkus (mm): 95
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX
• Lisainfo: 9065401417/MG
• Additional information: 9065401417/MG

• Engine Code: M 111.948
• Fitting Position: Rear Axle, Front Axle
• Pikkus (mm): 185
• Piduriliik: Ketaspidur
• Kaal (kg): 0,005
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Hoiatuskontakti pikkus (mm): 210
• vajaminev tükihulk: 2
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: both sides
• Brake Type: Disc Brake
• Length [mm]: 210
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: Bosch
• Quantity per packing unit: 2
• Pikkus (mm): 151
• Piirangutega toode/piirangu info: Sillakomplekt
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Brake Type: Disc Brake
• Fitting Position: Front Axle, Rear Axle
• Length [mm]: 99
• Manufacturer: FAST

• Fitting Position: Front Axle
• Brake System: ATE, Bosch
• Quantity per packing unit: 2
• Pikkus 1 [mm]: 190
• Piduriliik: Ketaspidur
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Wear indicator
• Quality class: PJ

Additional information: "Tootja: DELPHI
MERCEDES
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MERCEDES
(kvaliteediklass: PJ)"

• Construction Year from: 06.1997
• Manufacturer Restriction: BOSCH
• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pikkus (mm): 95
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• Pikkus (mm): 185
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Fitting Position: Front Axle
• Pikkus (mm): 210
• Piduriliik: Ketaspidur
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: BOS

• Quantity per packing unit: 10
• OE-numbri jaoks: 164 540 1017
• Installatsiooni pool: Tagasild mõlemapoolselt, esisild mõlemapoolselt
• Piduriliik: Ketaspidur
• Hoiatuskontakti pikkus (mm): 95
• Manufacturer: TRUCKTEC

• Quantity per packing unit: 4
• Fitting Position: both sides
• Weight [kg]: 0.005
• Brake Type: Disc Brake
• Weight [g]: 5
• Warning Contact Length [mm]: 195
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle
• Brake System: Bosch
• Quantity per packing unit: 2
• Pikkus 1 [mm]: 153
• Piduriliik: Ketaspidur
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0161
• Quality class: PJ

Additional information: "Tootja: DELPHI
KLASA V (638/2), 02.
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
KLASA V (638/2), 02.
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Hoiatuskontakti pikkus (mm): 189
• vajaminev tükihulk: 2
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 190
• Kaal (kg): 0,009
• Hoiatuskontakti pikkus (mm): 190
• Manufacturer: TOMEX

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 210
• Kaal (kg): 0,03
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Manufacturer: ABS

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild, Tagasild
• Pikkus (mm): 185
• OE-numbri jaoks: A9015400017
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE, Bosch
• Quantity per packing unit: 2
• Pikkus (mm): 99
• Piirangutega toode/piirangu info: Sillakomplekt
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 190
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW
• Quality class: Q

• Fitting Position: Front Axle
• Manufacturer Restriction: Bosch
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 210
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Pidurisüsteem: Bosch
• Manufacturer: BREMBO
• Name: BR A 00 282

• Fitting Position: Front Axle
• Manufacturer Restriction: Bosch
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 210
• pakendi pikkus [cm]: 20
• pakendi laius [cm]: 12
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,01
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Construction Year from: 03.1996
• Required quantity: 2
• Installatsiooni pool: Esisild, Tagasild
• Piduriliik: Ketaspidur
• Hoiatuskontakti pikkus (mm): 94
• Manufacturer: VIEROL

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Construction Year from: 08.1997
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 153
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW

• Construction Year from: 03.1996
• Required quantity: 2
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 115
• Pikkus 2 [mm]: 185
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle
• Manufacturer Restriction: Teves
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 185
• pakendi pikkus [cm]: 20
• pakendi laius [cm]: 12
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,011
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TEX

• Construction Year from: 03.1996
• Required quantity: 2
• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 99
• Pikkus 2 [mm]: 167
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle
• Manufacturer Restriction: Teves
• Quantity per packing unit: 2
• Piduriliik: Ketaspidur
• Pikkus (mm): 189
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Pidurisüsteem: Teves
• Manufacturer: BREMBO
• Name: BR A 00 292

• Manufacturer Restriction: Teves
• Kõrgus (mm): 57,5
• Jämedus/Tugevus (mm): 16,9
• Kulumishoiatus kontakt: koos integreeritud kulumianduriga
• Pidurisüsteem: Teves
• Installatsiooni pool: Tagasild
• Laius (mm): 64
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Laius (mm): 105
• Jämedus/Tugevus (mm): 17
• Kõrgus (mm): 53
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Bosch
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 03.1996
• Fitting Position: Rear Axle
• Width [mm]: 63.7
• Thickness [mm]: 16.9
• Height [mm]: 57.4
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Manufacturer Restriction: Bosch
• Kõrgus (mm): 53,1
• Jämedus/Tugevus (mm): 17,9
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pidurisüsteem: Bosch
• soovitava lisavarustuse artiklinumber: 27-0554
• Installatsiooni pool: Tagasild
• Laius (mm): 105
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Construction Year from: 08.1997
• Fitting Position: Rear Axle
• Wear Warning Contact: prepared for wear warning indicator
• Height 1 [mm]: 52.6
• Brake System: BOSCH/BENDIX
• Width 1 [mm]: 104.9
• Thickness 1 [mm]: 16.6
• Manufacturer: PROFIPOWER

• Construction Year from: 03.1996
• Fitting Position: Rear Axle
• Width [mm]: 105
• Thickness [mm]: 17.9
• Height [mm]: 52.9
• Wear Warning Contact: excl. wear warning contact
• Brake System: Bosch
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Construction Year from: 03.1996
• Pidurisüsteem: ATE
• Laius 1 (mm): 156,3
• Kõrgus (mm): 64,8
• Jämedus/Tugevus (mm): 20,7
• Kontrolltähistus: ECE R90
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, ilma kulumihoiatuseta Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Pidurisüsteem: TEVES
• Laius (mm): 64
• Kõrgus (mm): 57,4
• Jämedus/Tugevus (mm): 16,2
• WVA-number: 21279
• Kulumishoiatus kontakt: koos kulumianduriga
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Hoiatuskontakti pikkus (mm): 130
• Rakendustüüp: elektriline
• Piirangutega toode/piirangu info 2: ilma kokkusurumisvastase plekita
• Kontrolltähistus: ECE-R90
• Manufacturer: VALEO
• Name: VA 301062

• Fitting Position: Rear Axle
• Manufacturer Restriction: Teves
• Laius (mm): 64
• Kõrgus (mm): 57,5
• Jämedus/Tugevus (mm): 16,9
• Kulumishoiatus kontakt: koos integreeritud kulumianduriga
• Pidurisüsteem: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Engine Code: M 111.948
• Pikkus (mm): 63,8
• Laius (mm): 57,6
• Kontrolltähistus: ECE R90 Approved
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus 1 (mm): 16,2
• Pidurisüsteem: ATE
• Kulumishoiatus kontakt: koos kulumianduriga
• Kaal (kg): 0,737
• Hooldusinfot jälgida:
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 105
• Laius (mm): 52,8
• Kontrolltähistus: ECE R90 Approved
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus 1 (mm): 17,8
• Pidurisüsteem: Bosch
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kaal (kg): 0,902
• Hooldusinfot jälgida:
• Manufacturer: FEBI HAMULCE

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Construction Year from: 08.1997
• Laius 1 (mm): 104,9
• Kõrgus 1 (mm): 52,6
• Jämedus/Tugevus 1 (mm): 16,6
• Pidurisüsteem: BOSCH/BENDIX
• Hoiatuskontakti pikkus (mm): 152
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kaal (kg): 0,86
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Kontrolltähistus: E4 90R-01601/1202
• Pidurisüsteem: Continental
• Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
• Piirangutega toode/piirangu info: ilma lisavarustuseta
• WVA-number: 21278, 21279
• Hõõrdkatte materjal: Low-Metallic
• Kulumishoiatus kontakt: koos kulumianduriga
• Laius 1 (mm): 63,9
• Laius 2 (mm): 63,5
• Kõrgus 1 (mm): 57,1
• Kõrgus 2 (mm): 57,1
• Jämedus/Tugevus 1 (mm): 16,5
• Jämedus/Tugevus 2 (mm): 16,5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP667

• Construction Year to: 07.1997
• Installatsiooni pool: Tagasild
• Laius (mm): 63,7
• Kõrgus (mm): 57,4
• Jämedus/Tugevus (mm): 16,7
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Kulumishoiatus kontakt: koos kulumianduriga
• Pidurisüsteem: ATE
• Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• WVA Number: 21278, 21279
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Height [mm]: 53
• Thickness [mm]: 18
• Width [mm]: 105
• WVA Number: 23020
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Bosch
• Weight [kg]: 0.9
• Name: ALT 138357AAL
• Manufacturer: ALTE AUTOMOTIVE

• Manufacturer Restriction: Teves
• Quantity per packing unit: 4
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 17
• Laius (mm): 63,8
• Kõrgus (mm): 57,6
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Kulumishoiatus kontakt: koos integreeritud kulumi hoiatuskontaktiga
• Pidurisüsteem: ATE
• Hoiatuskontakti pikkus (mm): 200
• Kaal (kg): 0,7
• Manufacturer: TOMEX

• Fitting Position: Rear Axle
• Construction Year from: 08.1997
• Quantity per packing unit: 4
• Kontrolltähistus: E9 90R-01825/1160
• Pidurisüsteem: Bosch
• Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
• Piirangutega toode/piirangu info: ilma lisavarustuseta
• WVA-number: 23020
• Hõõrdkatte materjal: Low-Metallic
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Laius 1 (mm): 105
• Laius 2 (mm): 105
• Kõrgus 1 (mm): 52,7
• Kõrgus 2 (mm): 52,7
• Jämedus/Tugevus 1 (mm): 17,6
• Jämedus/Tugevus 2 (mm): 17,6
• Manufacturer: DELPHI
• Name: DE LP1471

• WVA-number: 21278, 21279
• Installatsiooni pool: Tagasild
• Manufacturer: ASHIKA-KLOCKI

• Installatsiooni pool: Esisild
• Laius (mm): 134
• Jämedus/Tugevus (mm): 20
• Kõrgus (mm): 65
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Bosch
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Katete arv: 4
• Jämedus/Tugevus (mm): 18
• Pikkus (mm): 105,1
• Kõrgus (mm): 53
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Piduriklots: lõigatud servata
• Pidurisüsteem: Bosch
• WVA-number: 23020
• Name: SK VKBP90568
• Manufacturer: SKF

• Brake System: Ate
• Fitting Position: Rear Axle
• Construction Year from: 01.1997
• Construction Year to: 12.1998
• Quantity per packing unit: 4
• Kontrolltähistus: ECE-R90
• Kõrgus 1 (mm): 57,6
• Kulumishoiatus kontakt: koos kulumianduriga
• Võnkumine: koos võnkevähendajaga
• Laius 1 (mm): 63,9
• Jämedus/Tugevus 1 (mm): 17
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Construction Year to: 07.1997
• Laius 1 (mm): 63,8
• Kõrgus 1 (mm): 57,4
• Jämedus/Tugevus 1 (mm): 16,9
• Pidurisüsteem: ATE
• Hoiatuskontakti pikkus (mm): 130
• Kulumishoiatus kontakt: koos integreeritud kulumianduriga
• Kaal (kg): 0,98
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Construction Year from: 08.1997
• Installatsiooni pool: Tagasild
• Laius (mm): 105
• Kõrgus (mm): 52,8
• Jämedus/Tugevus (mm): 17,9
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Bosch
• Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Pikkus (mm): 105
• Laius (mm): 52,8
• Kontrolltähistus: ECE R90 Approved
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus 1 (mm): 17,8
• Pidurisüsteem: Bosch
• Kaal (kg): 0,902
• Name: SW 10 91 6255
• Manufacturer: SWAG

Kulumishoiatus kontakt: ilma kulumihoiatuseta, kulumimärguande näidiku jaoks ettevalmistatud Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 4
• WVA-number: 2157621577
• Kontrolltähistus: E1 90R-01881/920
• Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
• Piirangutega toode/piirangu info: ilma lisavarustuseta
• Hõõrdkatte materjal: Low-Metallic
• Laius 1 (mm): 157
• Laius 2 (mm): 156
• Kõrgus 1 (mm): 65
• Jämedus/Tugevus 1 (mm): 20
• Name: Brake pads
• Quality class: PJ

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, koos integreeritud kulumianduriga Lisainfo: "Tootja: SRL
MERCEDES-BENZ SPRINT
(kvaliteediklass: PJ)"
Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
Piirangutega toode/piirangu info: ilma lisavarustuseta Tootja piirang: ATE WVA-number: WVA 21576/20.5
Jämedus 1 [mm]: 19,60
Kõrgus 1 (mm): 64,90
Laius 1 (mm): 156,50
Lisainfo: Soovita paigaldussarja 7933213 Additional information: "Tootja: SRL
MERCEDES-BENZ SPRINT
(kvaliteediklass: PJ)"
Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
Piirangutega toode/piirangu info: ilma lisavarustuseta Tootja piirang: ATE WVA-number: WVA 21576/20.5
Jämedus 1 [mm]: 19,60
Kõrgus 1 (mm): 64,90
Laius 1 (mm): 156,50
Lisainfo: Soovita paigaldussarja 7933213

• Manufacturer Restriction: Teves
• Article number of recommended accessories: 98031700
• Kõrgus (mm): 64,8
• Jämedus/Tugevus (mm): 20,7
• Kulumishoiatus kontakt: koos kulumianduriga
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Pidurisüsteem: Teves
• Installatsiooni pool: Esisild
• Laius (mm): 157
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Installatsiooni pool: Esisild
• Laius (mm): 156
• Jämedus/Tugevus (mm): 20
• Kõrgus (mm): 65
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Kulumishoiatus kontakt: koos kulumianduriga
• Pidurisüsteem: ATE
• Hoiatuskontakti pikkus (mm): 204
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Manufacturer Restriction: Bosch
• Article number of recommended accessories: 98018200
• Installatsiooni pool: Esisild
• Kõrgus (mm): 64,5
• Jämedus/Tugevus (mm): 20,9
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pidurisüsteem: Bosch
• Laius (mm): 135
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Construction Year from: 03.1996
• Fitting Position: Front Axle
• Thickness [mm]: 20.7
• Width [mm]: 156.3
• Height [mm]: 64.8
• Brake System: ATE
• Manufacturer: JPN

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Engine Code: M 111.948, M 111.950
• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer Restriction: ITT, Galfer
• Block Separation:
• Kulumishoiatus kontakt: koos integreeritud kulumianduriga
• Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
• soovitava lisavarustuse artiklinumber: 1987474320
• Tehnilisi andmeid jälgida:
• Materjal: Low-Metallic
• Kontrolltähistus: ECE-R90
• WVA-number: 21278
• Jämedus/Tugevus (mm): 17
• Laius (mm): 63,8
• Kõrgus (mm): 57,6
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Manufacturer Restriction: Bosch
• Laius (mm): 105
• Kõrgus (mm): 53,1
• Jämedus/Tugevus (mm): 17,9
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pidurisüsteem: Bosch
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Brake System: Bosch
• Fitting Position: Rear Axle
• Construction Year from: 01.1998
• Quantity per packing unit: 4
• Kontrolltähistus: ECE-R90
• Kõrgus 1 (mm): 52,7
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Võnkumine: koos võnkevähendajaga
• Laius 1 (mm): 105
• Jämedus/Tugevus 1 (mm): 18
• Manufacturer: METELLI UKL.HAMULCOWY

• Construction Year from: 08.1997
• Fitting Position: Front Axle
• Wear Warning Contact: prepared for wear warning indicator
• Height 1 [mm]: 64.3
• Brake System: BOSCH
• Width 1 [mm]: 134.5
• Thickness 1 [mm]: 21
• Manufacturer: PROFIPOWER

• Brake Disc Type: solid
• Thickness [mm]: 19
• Length [mm]: 156
• Weight [kg]: 2.1
• Height 1 [mm]: 65
• Wear Warning Contact: incl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• WVA Number: 21576, 21577
• Fitting Position: Front Axle
• Article number of recommended accessories: BPW-061
• Manufacturer: JAPKO

• Construction Year from: 03.1996
• Fitting Position: Front Axle
• Width [mm]: 156.3
• Thickness [mm]: 20.7
• Height [mm]: 64.8
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Brake Disc Type: solid
• Jämedus/Tugevus (mm): 19
• Pikkus (mm): 156
• Kaal (kg): 2,1
• Kõrgus 1 (mm): 65
• Kulumishoiatus kontakt: koos kulumianduriga
• Piirangutega toode/piirangu info: ilma lisavarustuseta
• Pidurisüsteem: ATE
• WVA-number: 21576, 21577
• Installatsiooni pool: Esisild
• soovitava lisavarustuse artiklinumber: BPW-061
• Manufacturer: ASHIKA-KLOCKI

• Construction Year to: 07.1997
• Installatsiooni pool: Esisild
• Laius (mm): 156,4
• Kõrgus (mm): 65
• Jämedus/Tugevus (mm): 20,3
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pidurisüsteem: ATE
• Piirangutega toode/piirangu info 2: koos kokkusurumisvastase plekiga
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Front Axle
• Construction Year to: 07.1997
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Width [mm]: 156.5
• Height [mm]: 64.9
• Thickness [mm]: 20.5
• Manufacturer: AUTO-GH

• Construction Year from: 08.1997
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 16,7
• Pikkus (mm): 104,9
• Kõrgus (mm): 52,8
• Pidurisüsteem: Bosch
• Manufacturer: DRIVE

• Construction Year from: 03.1996
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Kõrgus (mm): 64,8
• Pidurisüsteem: ATE
• Laius (mm): 156,5
• Jämedus/Tugevus (mm): 20,5
• soovitava lisavarustuse artiklinumber: KS0071
• Manufacturer: LPR

• Fitting Position: Front Axle
• Construction Year from: 03.1996
• Height 1 [mm]: 64.8
• Brake System: ATE
• Width 1 [mm]: 156.5
• Thickness 1 [mm]: 20.5
• Manufacturer: PROFIPOWER