• Length [mm]: 52
• External Thread [mm]: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 1
• Switch Point [°C]: 120
• Colour Coding: black
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: 150
• Thread Size: M14 x 1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Spanner Size: 19
• Number of pins: 2
• Thread Size: M14x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Length [mm]: 52
• Spanner Size: 19
• Housing Colour: black
• Manufacturer: KAMOKA

• for OE number: A0085424517
• Spanner Size: 19
• Manufacturer: KAMOKA

• Length [mm]: 52
• Spanner Size: 19
• Colour Coding: black
• Number of pins: 1
• Thread Size: M14x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Length [mm]: 56.6
• Weight [kg]: 0.036
• Thread Size: M14x1,5
• Switch Point [°C]: 120
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour Coding: black
• Number of pins: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Number of pins: 1
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 2D0919501C
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Thread Size: M14x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 1
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of pins: 1
• Colour: black
• Thread Size: M14x1,5 mm
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 0055421017
• Manufacturer: MEAT&DORIA

• Thread Size: M 14x1,5
• Plug Type: Round Plug
• Manufacturer: FAE

• Length [mm]: 52
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 1
• Colour Coding: black
• Switch Point [°C]: 120
• Weight [kg]: 0.034
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14 x 1,5
• Spanner Size: 19
• Manufacturer: ERA

• External Thread Size: M14 x 1,5
• Spanner Size: 22
• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.15
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 104.980
• Number of pins: 1
• Thread Size: M14x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: M 104.980
• Number of pins: 1
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M14x1.5
• Number of connectors: 1
• Plug Type: Round Plug
• Manufacturer: VERNET

• Thread Size: M14 x 1,5
• Spanner Size: 22
• Number of pins: 4
• Connector Shape: round
• Manufacturer: ERA

• Number of pins: 2
• Colour: white
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 90
• Width [mm]: 35
• Thickness [mm]: 22
• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: FEB
• Additional information: FE21751
• Lisainfo: FE21751

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 4
• Socket colour: black
• Spanner Size: 22
• Thread Size: M14x1.5
• for OE number: 0085423217
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: M 104.980
• Housing Colour: black
• Number of pins: 4
• Thread Size: M14X1.5-6g
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Number of connectors: 2
• Weight [kg]: 0.045
• for OE number: 140 540 00 17
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 628, 70
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M14x1,5
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Name: Andur,Olisurve
• Manufacturer: MAX

• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Switch Point [°C]: 130
• Weight [kg]: 0.102
• for OE number: 008 542 45 17
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 104.980
• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Thread Size: M14x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: M 104.980
• Number of pins: 2
• Vehicle Equipment: for vehicles with air conditioning
• Thread Size: M14x1,5
• Spanner Size: 19
• Name: EP 1.830.139
• Manufacturer: EPS

• Vehicle Equipment: for vehicles with air conditioning
• Thread Size: M 14x1,5
• Number of pins: 2
• Colour: blue
• Supplementary Article/Supplementary Info: with gasket/seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: M 104.980
• Number of pins: 4
• Thread Size: M14x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Engine Code: M 104.980
• Number of pins: 4
• Thread Size: M14x1,5
• Spanner Size: 22
• Name: EP 1.830.151
• Manufacturer: EPS

• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Switch Point [°C]: 130
• Weight [kg]: 0.102
• for OE number: 008 542 45 17
• Name: SW 99 90 7016
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,350
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Thread Size: M14x1,5
• Colour: blue
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Weight [kg]: 0.037
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Tightening Torque [Nm]: 20
• Net Weight [g]: 44
• Packaging width [cm]: 6.7
• Packaging length [cm]: 8.7
• Packaging height [cm]: 9.2
• Name: MH TSE2
• Manufacturer: MAHLE

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 4,700, 560
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M14x1,5
• Colour: blue
• Sensor Type: NTC Sensor
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Corresponds to the original part in colour: light blue
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 104.980
• Connector Shape: round
• Manufacturer: FAE

• Number of pins: 1
• Fitting Depth [mm]: 12
• Plug Type: Round Plug
• Number of mounting bores: 2
• Fabrication Number: EPO-ME-000
• Manufacturer: NTY
• Name: NTY EPO-ME-000

• Voltage [V]: 12
• Number of pins: 1
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV396
• Manufacturer: ESEN SKV

Manufacturer: JPN

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 1
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: MAX

• Cable Length [mm]: 1,270
• Number of pins: 2
• Plug Type: Round Plug
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV526

• Number of pins: 1
• Number of mounting bores: 2
• Fitting Depth [mm]: 12
• for OE number: 1245420017
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Length [mm]: 60
• Switch point to [bar]: 3
• Outer Diameter [mm]: 39.5, 45.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 17
• Number of connectors: 1
• Weight [kg]: 0.12
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 12x1,5
• Manufacturer: FAE

• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.11
• Fitting Position: Oil Sump
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 1,385, 40
• Outer Diameter [mm]: 14.61
• Number of connectors: 2
• Cable Length [mm]: 1,293
• Weight [kg]: 0.105
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Resistor [Ohm]: 830
• Tolerance [%]: 10
• Cable Length [mm]: 1,340
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Plug Type: Round Plug
• Fitting Position: Flywheel side
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009110441

SVHC: 96-45-7; Imidazolidine-2-thione; (2-imidazoline-2-thiol), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.