• Height [mm]: 26
• Inner Diameter [mm]: 7
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 35
• Name: Hdraulikafilter,roolimine
• Manufacturer: MAX
• Lisainfo: PF-533
• Additional information: PF-533

• Transmission ID: 722.3
• Filter type: Screen Filter
• Thickness [mm]: 12.5
• Outer Diameter [mm]: 8
• Weight [kg]: 0.005
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

Transmission Type: 4-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Outer Diameter [mm]: 80.5
• Inner Diameter [mm]: 35
• Inner Diameter 1 [mm]: 35
• Height [mm]: 26
• Manufacturer: HENGST FILTER

• Transmission ID: 722.3
• Filter type: Screen Filter
• Thickness [mm]: 12.5
• Outer Diameter [mm]: 8
• Weight [kg]: 0.005
• Name: SW 10 94 7283
• Manufacturer: SWAG

Transmission Type: 4-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with power steering
• Material: Paper
• Manufacturer: METZGER

• Transmission Code: 722.3+722.4
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Filter type: Filter Insert
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic filter, gearbox
• Additional information: Hydraulic filter, gearbox

• Filter type: Screen Filter
• Length [mm]: 189
• Width [mm]: 175
• Thickness [mm]: 20
• Material: Steel
• Surface: Blank
• Weight [kg]: 0.25
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Transmission ID: 722.300 - 722.376
• Filter type: Screen Filter, Suction Filter
• Supplementary Article/Supplementary Info: without gasket/seal
• Housing Type: Metal Housing
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 26
• Inner Diameter [mm]: 7
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 35
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,ROOLIMINE
• Manufacturer: MAN

• Filter type: Filter Insert
• Diameter [mm]: 80.6
• Sealing Ring Diameter [mm]: 35
• Height 1 [mm]: 26
• Packaging width [cm]: 2.8
• Packaging length [cm]: 8.2
• Packaging height [cm]: 8.2
• Net Weight [g]: 87
• Name: KN HX44
• Manufacturer: KNECHT

• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Transmission ID: 722.324, 722.355
• Transmission Type: 4-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Transmission Code: 722.4, 722.3
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Diameter [mm]: 80.6
• Sealing Ring Diameter [mm]: 35
• Height 1 [mm]: 26
• Packaging width [cm]: 2.8
• Packaging length [cm]: 8.2
• Packaging height [cm]: 8.2
• Net Weight [g]: 87
• Manufacturer: MAHLE KNECHT

• Transmission Number: 722.355, 722.324
• Transmission Type: 4-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer Restriction: MERCEDES-BENZ
• Quantity Unit: Set
• Transmission Code: W 4 A 040, W 4 A 028, 722.3
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Transmission Type: Automatic Transmission
• Transmission ID: 722.300 - 722.376
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with gasket/seal
• for components see parts list:
• Observe system fill quantity:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Transmission Code: 722.3 / 722.5
• Filter type: Filter Insert
• Length [mm]: 189
• Width [mm]: 174
• Height [mm]: 24
• Manufacturer: HENGST FILTER

• Transmission Type: 4-Speed Automatic Transmission
• Transmission ID: 722.4
• Filter type: Screen Filter
• Length [mm]: 188.8
• Width [mm]: 175
• Height [mm]: 20
• Seal Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.425
• Supplementary Article/Info 2: with oil sump gasket
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: FEB
• Lisainfo: 08900 FEBI
• Additional information: 08900 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Code: W 4 A 040, 722.3.., 722.4..
• Filter type: Suction Filter
• Transmission Type: 4-Speed Automatic Transmission
• not for transmission code: 722.323/350/353, 722.362/364/365/370
• Manufacturer: ELRING

• Transmission Type: 4-Speed Automatic Transmission
• Transmission Code: 722.4, W4A 020
• Height [mm]: 23.3
• Length [mm]: 187.3
• Width [mm]: 173.7
• Manufacturer: PURFLUX

• Transmission Code: 722,3, 722,4
• See accessories list for additionally required parts:
• Transmission Type: 4-Speed Automatic Transmission
• Filter type: Filter Insert
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 4-Speed Automatic Transmission
• Transmission ID: 722.4
• Length [mm]: 188.8
• Weight [kg]: 0.4
• Filter type: Screen Filter
• Manufacturer: DRIVE

• Transmission ID: 722.355, 722.324
• Transmission Type: 4-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Code: 722.3, W 4 A 028, W 4 A 040
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Transmission Code: 722.400-722.440
• Filter type: Suction Filter
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Supplementary Article/Info 2: with oil sump gasket
• Bypass Valve Opening Pressure [bar]: 0.2
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Code: 722.3+722.4
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN

• Transmission Code: 722,3
• Transmission Type: 4-Speed Automatic Transmission
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• Length [mm]: 183.7
• Width [mm]: 163.5
• Supplementary Article/Info 2: with oil sump gasket
• See accessories list for additionally required parts:
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Additional information: V30-0493
• Lisainfo: V30-0493

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission number from: 722.300
• Transmission number to: 722.440
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 189.7
• Width [mm]: 175
• Height [mm]: 23
• Supplementary Article/Supplementary Info: without gasket/seal
• Packaging length [cm]: 18
• Packaging height [cm]: 19
• Packaging width [cm]: 2
• Net Weight [g]: 320
• Manufacturer: MAHLE KNECHT

• Transmission Code: 722.300-722.371
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Transmission Code: 722.400-722.440
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 21
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN+HUMMEL

• Transmission number from: 722.300
• Transmission number to: 722.395
• Filter type: Filter Insert
• Length [mm]: 186.5
• Width [mm]: 171
• Height [mm]: 23.6
• Inner Diameter 2 [mm]: 33
• Transmission Code: 722.3
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Soft Material Gasket
• Recommended change interval [km]: 60,000
• Packaging width [cm]: 2.9
• Packaging length [cm]: 26
• Packaging height [cm]: 38
• Net Weight [g]: 428
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN HX46D1

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission

• Transmission Code: 500 + 560 (722.323/3, 722,5
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Supplementary Article/Supplementary Info: with gasket/seal
• See accessories list for additionally required parts:
• Manufacturer: VAICO

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 722.323/350
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Length [mm]: 184
• Width [mm]: 164
• Height [mm]: 20
• Inner Diameter [mm]: 26
• Bypass Valve Opening Pressure [bar]: 0.2
• SVHC: No SVHC present!
• Manufacturer: MANN+HUMMEL