• Pikkus (mm): 95
• Kulumisnäidikute arv [ühe telje kohta]: 4
• Netokaal [kg]: 0,01
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: NK

• Construction Year to: 03.1991
• Fitting Position: Front Axle both sides
• Pikkus (mm): 94
• Lisainfo: ESISILD JA TAGASILD
• Additional information: ESISILD JA TAGASILD

• Kasutuspinge [V]: 12
• Anduritüüp: NTC-andur
• Lülituspunkt [°C]: 150
• Keermemõõt: M14 x 1,5
• Võtmekaugus: 22
• Värv: must
• Pistikkontaktide arv: 4
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Pikkus (mm): 52
• Korpusevärv: must
• Võtmekaugus: 19
• Manufacturer: KAMOKA

• Võtmekaugus: 19
• OE-numbri jaoks: A0085424517
• Manufacturer: KAMOKA

• Pikkus (mm): 90
• Pinge [V]: 12
• Manufacturer: KAMOKA

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 1
• Võtmekaugus: 19
• Keermemõõt: M14x1.5
• OE-numbri jaoks: 2D0919501C
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Pikkus (mm): 56,6
• Kaal (kg): 0,036
• Keermemõõt: M14x1,5
• Lülituspunkt [°C]: 120
• Võtmekaugus: 19
• Piirangutega toode/piirangu info: koos tihendiga
• Värvimarkeering: must
• Pistikkontaktide arv: 1
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 1
• Värv: must
• Keermemõõt: M14x1,5 mm
• Anduritüüp: NTC-andur
• Võtmekaugus: 19
• OE-numbri jaoks: 005 542 10 17, 6615423017, 2D0 919 501 C
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 4
• Pistikukatte kuju: ümar
• Pistiku värv: must
• Keermemõõt: M14x1,5
• Võtmekaugus: 22 mm
• OE-numbri jaoks: A 008 542 32 17
• Manufacturer: MEAT&DORIA

• Keermemõõt: M14 x 1,5
• Võtmekaugus: 19
• Manufacturer: ERA

• Engine Code: M 117.968
• Number of pins: 1
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Manufacturer: FACET

Manufacturer: MAGNETI MARELLI

• Engine Code: M 117.968
• Number of pins: 1
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Keermemõõt: M14x1.5
• Ühenduste arv: 1
• Pistikute teostus: Ümarpistik
• Manufacturer: VERNET

• Keermemõõt: M 14x1,5
• Pistikute teostus: Ümarpistik
• Manufacturer: FAE

Manufacturer: FAST

• Keermemõõt: M14 x 1,5
• Võtmekaugus: 22
• Pistikkontaktide arv: 4
• Pistikukatte kuju: ümar
• Manufacturer: ERA

• Required quantity: 1
• Pistikkontaktide arv: 2
• Värv: valge
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pikkus (mm): 90
• Laius (mm): 35
• Jämedus/Tugevus (mm): 22
• Pinge [V]: 12
• Ühenduste arv: 2
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: ANDUR,JAHUTUSVEDELIKUTASE
• Manufacturer: FEB
• Additional information: FE21751
• Lisainfo: FE21751

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 90
• Laius (mm): 36
• Kõrgus (mm): 21
• Kaal (kg): 0,016
• Pistikkontaktide arv: 2
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Anduritüüp: NTC-andur
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Pistikkontaktide arv: 1
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ümar
• Pistikkontaktide arv: 4
• Pistiku värv: must
• Võtmekaugus: 22
• Keermemõõt: M14x1.5
• OE-numbri jaoks: 0085423217
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE ELEKTRYKA

• Montaaživiis: kruvitud
• Pinge [V]: 12
• Takistus [oom]: 628, 70
• Piirangutega toode/piirangu info: koos tihendiga
• temperatuurivahemik alates [°C]: 25
• Temperatuurivahemik kuni [°C]: 80
• Keermemõõt: M14x1,5
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 1
• Korpusevärv: must
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PT009107251
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 117.968
• Engine Number from: 036220
• Number of pins: 2
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Manufacturer: FACET

• Engine Code: M 117.968
• Engine Number from: 036220
• Number of pins: 2
• Keermemõõt: M14x1,5
• Võtmekaugus: 19
• Name: EP 1.830.139
• Manufacturer: EPS

• Anduritüüp: passiivne andur
• Lülituspunktid [bar]: 3
• Lisainfo: Sender unit, oil pressure
• Additional information: Sender unit, oil pressure

• Engine Code: M 117.968
• Engine Number from: 037641
• Number of pins: 4
• Keermemõõt: M14x1,5
• Võtmekaugus: 22
• Name: EP 1.830.151
• Manufacturer: EPS

• Engine Number from: M 117.968 037642
• Technical Information: Specify fitted part at the vehicle/motor
• Anduritüüp: NTC-andur
• Keermemõõt: M14x1,5
• Võtmekaugus: 22
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Pistikkontaktide arv: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY
• Lisainfo: 0140540035
• Additional information: 0140540035

• Engine Number from: 036221
• Väliskeerme mõõde: M14 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Lülituspunkt [°C]: 130
• Kaal (kg): 0,102
• OE-numbri jaoks: 008 542 45 17
• Name: SW 99 90 7016
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 036221
• Väliskeerme mõõde: M14 x 1,5
• Võtmekaugus: 19
• Ühenduste arv: 2
• Lülituspunkt [°C]: 130
• Kaal (kg): 0,102
• OE-numbri jaoks: 008 542 45 17
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.1987
• Engine Code: M 117.968
• Korpusevärv: must
• Pistikkontaktide arv: 4
• Keermemõõt: M14X1.5-6g
• Võtmekaugus: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Keermemõõt: M12 x 1,5
• Lülituspunkt alates [bar]: 0
• Lülituspunkt kuni [bar]: 3
• Kaal (kg): 0,103
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M 117.968
• Engine Number from: 037641
• Pistikkontaktide arv: 4
• Värv: must
• Keermemõõt: M14X1,5
• Võtmekaugus: 22
• Anduritüüp: NTC-andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Manufacturer: HELLA
• Name: HE 6PT009107841

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• tootekoodile: 006 542 77 17
• Laius 1 (mm): 67
• Kõrgus 1 (mm): 68
• Pikkus 1 [mm]: 40
• Kaal (g): 46
• Garantii: 3 aastat garantii
• Pistikkontaktide arv: 2
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 3
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Ülekandeliinide arv: 3
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Pistikkontaktide arv: 2
• Manufacturer: METZGER

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV903
• Manufacturer: ESEN SKV

• Pikkus (mm): 89,5
• Piirangutega toode/piirangu info: koos tihendiga
• Pinge [V]: 12
• Nimivõimsus [W]: 1,2
• Pistikkontaktide arv: 2
• Vastab originaalosa värvile: piimvalge
• Lüliti funktsioon: avaja
• Pistikute teostus: Ümarpistik
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 1
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Keermemõõt: M 12x1,5
• Manufacturer: FAE

• Pinge [V]: 12
• Pistikkontaktide arv: 1
• Garantii: 3 aastat garantii
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 17SKV398
• Manufacturer: ESEN SKV

• Engine Number to: ..037641
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: A 363211
• Block Separation:
• Vehicle Identification Number (VIN) from: A 363212
• Ülekandeliinide arv: 3
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 1
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6EZ004269031
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.