• Fabrication Number: BPP-ME-020
• Relay function: Air Suspension
• Number of pins: 5
• Manufacturer: NTY

• Trim Level: Luftfederung / Air s
• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 99
• Välisläbimõõt [mm]: 41
• Sisend-Ø (mm): 10,4
• Väljalase-Ø (mm): 8
• Välisläbimõõt 1 [mm]: 47
• SVHC: SVHS aineid ei esine
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Spring Type: for vehicles with air suspension
• Välisläbimõõt [mm]: 47
• pikkus üle kõige (mm): 99
• Manufacturer: HENGST FILTER

• Fitting Position: Rear Axle
• Manufacturer: METALCAUCHO

• for special equipment code: -487
• Name: Paigutus, suruohukompressor
• Manufacturer: MAX

• OE-numbri jaoks: 002 542 2319
• Pinge [V]: 12
• Name: RELEE, NIVOOREGULEERIMINE
• Manufacturer: TRU
• Lisainfo: 02.42.353
• Additional information: 02.42.353

• Fitting Position: Front Axle
• Manufacturer: METALCAUCHO

• Relay function: Starter, Hydraulic Unit
• Block Separation:
• for special armoured vehicles with armour class: B7
• Värv: roheline
• Ühenduste arv: 5
• Relee funktsioon: Õhkvedrustus
• Kaal (kg): 0,029
• Manufacturer: VEMO
• Lisainfo: V30-71-0037 VEM
• Additional information: V30-71-0037 VEM

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for special equipment code: -487
• Kaal (kg): 0,016
• pakendi pikkus [cm]: 10
• pakendi laius [cm]: 10
• pakendi kõrgus [cm]: 2
• Manufacturer: FEBEST
• Lisainfo: 1698-AC-KIT FEBEST
• Additional information: 1698-AC-KIT FEBEST

• Vedrustustüüp: õhkvedrustusega sõidukile
• Klapitüüp: Magnetklapp
• Manufacturer: KAMOKA

• Installatsiooni pool: kahepoolne, ees
• Uus osa ilma tagatisrahata:
• Vana detaili tagastus mittevajalik:
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Valve type: Multiport Valve
• Fabrication Number: ZPZ-ME-000
• Manufacturer: NTY

• Fabrication Number: EZC-ME-197
• Fitting Position: Front Axle both sides
• Manufacturer: NTY

• Valve type: Multiport Valve
• Weight [kg]: 0.88
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3, 6
• Number of connectors: 6
• Supplementary Article/Info 2: with sensor, with retaining ring
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 93SKV802

• Klapitüüp: Mitmeotstarbeline klapp
• Uus osa ilma tagatisrahata:
• Vana detaili tagastus mittevajalik:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left, Front Axle Right
• Guarantee: 3 years guarantee
• Weight [kg]: 3.56
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 58SKV065

Braking/Drive Dynamics: for vehicles with Airmatic DC, for vehicles without ABC

• Weight [kg]: 4.8
• Spring Type: for vehicles with air suspension
• Supplementary Article/Info 2: with dryer
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 58SKV500
• Manufacturer: ESEN SKV

• OE-numbri jaoks: 211 320 0304
• Name: Kompressor,suruohussteem
• Manufacturer: MAX
• Lisainfo: 27-5001
• Additional information: 27-5001

• Klapitüüp: Juhtklapp
• Name: Klapp,suruohuseade
• Manufacturer: MD

• Vedrustustüüp: õhkvedrustusega sõidukile
• Piirangutega toode/piirangu info 2: koos kuivatiga
• Piirangutega toode/piirangu info: Vajalik relee vahetus, releega
• Manufacturer: KAMOKA

• Valve type: Multiport Valve
• Material: Aluminium
• Width 1 [mm]: 110
• Height 1 [mm]: 52
• Length 1 [mm]: 260
• Weight [g]: 75
• Guarantee: 3 years guarantee
• for OE number: 220 320 02 58
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: Front Axle, both sides
• Guarantee: 3 years guarantee
• Weight [kg]: 8.7
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Suspension: for vehicles w/out Active Body Control
• Pinge [V]: 12
• Ühenduste arv: 2
• Kaal (kg): 4
• Hooldusinfot jälgida:
• Name: Kompressor,suruohussteem
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Manufacturer: JAPKO

Braking/Drive Dynamics: for vehicles with Airmatic DC, for vehicles without ABC

• Vedrustustüüp: õhkvedrustusega sõidukile
• Piirangutega toode/piirangu info 2: koos kuivatiga
• Manufacturer: JPA

Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO DB KLASA S/KLASA E/CLS 1,8-6,2 98-10/MAYBACH 57/62 5,5-6,0 02-12 PATRZ KATALOG

• Vedrustustüüp: õhkvedrustusega sõidukile
• Klapitüüp: Magnetklapp
• pakendi pikkus [cm]: 21
• pakendi laius [cm]: 12
• pakendi kõrgus [cm]: 11,5
• Kaal (kg): 1
• Netokaal [kg]: 0,9
• toodetud: Hiina
• Manufacturer: ARNOTT

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Manufacturer: ASHIKA-AMORTYZATORY

Braking/Drive Dynamics: for vehicles with Airmatic DC, for vehicles without ABC

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Name: Ohuamort
• Manufacturer: MAX

Braking/Drive Dynamics: for vehicles with Airmatic DC, for vehicles without ABC

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye
• Name: Ohuamort
• Manufacturer: MAX

Braking/Drive Dynamics: for vehicles with Airmatic DC, for vehicles without ABC

• OE-numbri jaoks: 211 320 0304
• Manufacturer: TRUCKTEC AUTOMOTIVE
• Lisainfo: 02.30.149
• Additional information: 02.30.149

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye
• Manufacturer: DENCKERMANN AMORTYZATORY

Braking/Drive Dynamics: for vehicles with Airmatic DC, for vehicles without ABC

• Manufacturer: WAB

Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO DB E/S-KLASA 98-09 (REGENEROWANY)

• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vedrustustüüp: õhkvedrustusega sõidukile
• pakendi pikkus [cm]: 29,8
• pakendi laius [cm]: 18,4
• pakendi kõrgus [cm]: 20,3
• Kaal (kg): 4,4
• Netokaal [kg]: 4
• toodetud: Hiina
• Piirangutega toode/piirangu info 2: koos kuivatiga
• Piirangutega toode/piirangu info: Vajalik relee vahetus, releega
• Manufacturer: ARNOTT

• Vedrustustüüp: õhkvedrustusega sõidukile
• pakendi pikkus [cm]: 30
• pakendi laius [cm]: 19
• pakendi kõrgus [cm]: 22
• Kaal (kg): 4,5
• Netokaal [kg]: 4,2
• toodetud: Saksamaa
• Piirangutega toode/piirangu info 2: koos kuivatiga
• Piirangutega toode/piirangu info: Vajalik relee vahetus, releega
• Manufacturer: ARNOTT

Lisainfo: 00-06 Mercedes-Benz S-Class (W220) w/o 4Matic, 03-06 S-Class (W220) w/ 4Matic, 02-09 E-Class (W211), 04-11 CLS-Class, 02-12 Maybach 57 62 Additional information: 00-06 Mercedes-Benz S-Class (W220) w/o 4Matic, 03-06 S-Class (W220) w/ 4Matic, 02-09 E-Class (W211), 04-11 CLS-Class, 02-12 Maybach 57 62

• Fitting Position: Front Axle
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Bottom Yoke, Top yoke
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with air suspension
• Name: MM 2438AS
• Manufacturer: MAGNETI MARELLI

• Suspension: for vehicles with standard suspension
• Supplementary Article/Info 2: with plug connector
• Fitting Position: both sides, Front Axle
• Spring Type: for vehicles with air suspension
• Manufacturer: VEMO GERMANY

Braking/Drive Dynamics: for vehicles with Airmatic DC, for vehicles without ABC General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Name: Ohuamort
• Manufacturer: JPA

Braking/Drive Dynamics: for vehicles with Airmatic DC, for vehicles without ABC

• Spring Type: for vehicles with air suspension
• Manufacturer: WAB

Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO DB W211 SYS AIRMATIC WABCO NOWY Z KAUCJ¤ !

• Spring Type: for vehicles with hydropneumatic suspension
• Braking/Drive Dynamics: for vehicles with ABC
• Suspension: for vehicles without AMG suspension
• Fitting Position: Right Front
• Generally overhauled:
• Used part return required:
• Packaging length [cm]: 76.5
• Packaging width [cm]: 19
• Packaging height [cm]: 20
• Weight [kg]: 11.5
• Net weight [kg]: 9.8
• Manufactured in: USA
• paired article number: SK-2423
• Shock Absorber Mounting Type: Top yoke, Bottom Pin
• Vehicle Identification Number (VIN) from: 032100

Lisainfo: 00-06 Mercedes-Benz S-Class (W220), 99-06 CL-Class (W215) Additional information: 00-06 Mercedes-Benz S-Class (W220), 99-06 CL-Class (W215)

• Spring Type: for vehicles with hydropneumatic suspension
• Braking/Drive Dynamics: for vehicles with ABC
• Generally overhauled:
• Used part return required:
• Fitting Position: Left Front
• Packaging length [cm]: 77
• Packaging width [cm]: 19
• Packaging height [cm]: 20
• Weight [kg]: 11.6
• Net weight [kg]: 9.9
• Manufactured in: USA
• paired article number: SK-2454
• Shock Absorber Mounting Type: Top yoke, Bottom Yoke
• Vehicle Identification Number (VIN) to: 032099

Lisainfo: 00-02 Mercedes-Benz S-Class (W220), 00-02 CL-Class (W215) Additional information: 00-02 Mercedes-Benz S-Class (W220), 00-02 CL-Class (W215)

• Spring Type: for vehicles with hydropneumatic suspension
• Braking/Drive Dynamics: for vehicles with ABC
• Generally overhauled:
• Used part return required:
• Fitting Position: Left Rear
• Packaging length [cm]: 102
• Packaging width [cm]: 19.5
• Packaging height [cm]: 21
• Weight [kg]: 13.1
• Net weight [kg]: 11.1
• Manufactured in: USA
• paired article number: SK-2456
• Shock Absorber Mounting Type: Top yoke, Bottom eye
• Vehicle Identification Number (VIN) to: 032099

Lisainfo: 00-06 Mercedes-Benz S-Class (W220), 99-06 CL-Class (W215) Additional information: 00-06 Mercedes-Benz S-Class (W220), 99-06 CL-Class (W215)

• Spring Type: for vehicles with hydropneumatic suspension
• Braking/Drive Dynamics: for vehicles with ABC
• Generally overhauled:
• Used part return required:
• Fitting Position: Right Front
• Packaging length [cm]: 76.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 19
• Weight [kg]: 11.4
• Net weight [kg]: 9.7
• Manufactured in: USA
• paired article number: SK-2455
• Shock Absorber Mounting Type: Top yoke, Bottom Yoke
• Vehicle Identification Number (VIN) to: 032099

Lisainfo: 00-02 Mercedes-Benz S-Class (W220), 00-02 CL-Class (W215) Additional information: 00-02 Mercedes-Benz S-Class (W220), 00-02 CL-Class (W215)

• Spring Type: for vehicles with hydropneumatic suspension
• Braking/Drive Dynamics: for vehicles with ABC
• Suspension: for vehicles without AMG suspension
• Fitting Position: Left Front
• Generally overhauled:
• Used part return required:
• Packaging length [cm]: 77
• Packaging width [cm]: 19
• Packaging height [cm]: 19
• Weight [kg]: 11.5
• Net weight [kg]: 9.8
• Manufactured in: USA
• paired article number: SK-2422
• Shock Absorber Mounting Type: Top yoke, Bottom Pin
• Vehicle Identification Number (VIN) from: 032100

Lisainfo: 00-06 Mercedes-Benz S-Class (W220), 99-06 CL-Class (W215) Additional information: 00-06 Mercedes-Benz S-Class (W220), 99-06 CL-Class (W215)

• Spring Type: for vehicles with hydropneumatic suspension
• Braking/Drive Dynamics: for vehicles with ABC
• Generally overhauled:
• Used part return required:
• Fitting Position: Right Rear
• Packaging length [cm]: 102
• Packaging width [cm]: 19
• Packaging height [cm]: 22
• Weight [kg]: 13.3
• Net weight [kg]: 11.3
• Manufactured in: USA
• paired article number: SK-2457
• Shock Absorber Mounting Type: Top yoke, Bottom eye
• Vehicle Identification Number (VIN) to: 032099

Lisainfo: 00-06 Mercedes-Benz S-Class (W220), 99-06 CL-Class (W215) Additional information: 00-06 Mercedes-Benz S-Class (W220), 99-06 CL-Class (W215)