Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Manufacturer: KAMOKA
- Construction Year from: 06.2000
-
Oxygen Sensor: Diagnostic Probe,
Regulating Probe, Finger probe - Emission Standard: D4
-
Vehicle Identification Number (VIN) to: A168239,
A138350 - not for Component Number: 801
- Block Separation:
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
505 -
Additional information: MGS-
505
Fitting Position: before catalytic converter, after catalytic converter
- Construction Year to: 06.2000
- Fitting Position: Left
- Vehicle Identification Number (VIN) to: A168239
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0117
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
- not for emission standard: D4
-
Vehicle Identification Number (VIN) from: A138351,
A087201 - Block Separation:
- Construction Year from: 07.2000
-
Oxygen Sensor: Diagnostic Probe,
Regulating Probe, Heated - not for Component Number: 800
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
Fitting Position: before catalytic converter, after catalytic converter
- Construction Year to: 06.2000
-
Fitting Position: both sides,
after catalytic converter - Vehicle Identification Number (VIN) to: A168239
- Cable Length [mm]: 380
-
Oxygen Sensor: Finger probe,
Heated - Manufacturer: DELPHI
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Length [mm]: 480
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV057
- Engine Code: M 113.960
- Fitting Position: Front
- Vehicle Identification Number (VIN) to: A138350
-
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: round
- Length [mm]: 515
-
Thread Size: M18 x 1,
5 - Conductor Number: 4
- Cable Length [mm]: 500
- Number of circuits: 4
- Weight [kg]: 0.132
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Length [mm]: 465
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.14
- Resistor [Ohm]: 2.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV608
- Manufacturer: ESEN SKV
- Vehicle Identification Number (VIN) from: **********A087201
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 400
- Weight [kg]: 0.082
- Name: SW 33 10 3189
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) to: A 150304
- Engine Code: M 113.960
- for OE number: 0003122V005
- Oxygen Sensor: Heated
-
External Thread [mm]: M18 x 1,
5 - Number of circuits: 4
- Manufacturer: TRUCKTEC
- Construction Year from: 06.2000
- Construction Year to: 09.2004
-
Exhaust System: Duplex
(1 le./ 1 ri.) -
Oxygen Sensor: Diagnostic Probe,
Regulating Probe - Length [mm]: 470
- Number of connectors: 4
- Manufacturer: VERNET
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Length [mm]: 660
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.14
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV643
- Vehicle Identification Number (VIN) from: A138351
-
Oxygen Sensor: Regulating Probe,
Planar probe - Fitting Position: Exhaust Manifold
- Required quantity: 2
- Number of pins: 4
- Cable Length [mm]: 800
- for OE number: 0015409017
- Manufacturer: MEAT&DORIA
-
Engine Code: M 113.960,
M 113.966 - Required quantity: 2
-
Line insulation design: with silicone-
coated woven- fibre insulation - Supplementary Article/Info 2: without plug
- Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Fitting Position: after catalytic converter
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 06.2000
-
Oxygen Sensor: Diagnostic Probe,
Regulating Probe - Emission Standard: D4
-
Vehicle Identification Number (VIN) to: A 168239,
A 138350, A138350, A168239 - not for Component Number: 801
- Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: after catalytic converter, before catalytic converter
-
Oxygen Sensor: Diagnostic Probe,
Regulating Probe - not for emission standard: D4
-
Vehicle Identification Number (VIN) from: A 138351,
A 087201 - Block Separation:
- Construction Year from: 07.2000
- not for Component Number: 800
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: after catalytic converter, before catalytic converter
- Construction Year from: 09.2002
- Vehicle Identification Number (VIN) from: A087201
- Quantity: 2
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Oxygen Sensor: Planar probe,
Heated, Thread pre- greased - Supplementary Article/Info 2: without plug
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Vehicle Identification Number (VIN) from: A138351
- Engine Code: M 113.960
- Block Separation:
- Fitting Position: after catalytic converter
- Cable Length [mm]: 380
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Construction Year from: 06.2000
- Fitting Position: Left
- Vehicle Identification Number (VIN) from: A087201
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Fitting Position: after catalytic converter
- Vehicle Identification Number (VIN) from: A087201
- Oxygen Sensor: Planar probe
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 320
- Number of pins: 4
- Name: Lambda andur
- Manufacturer: MEY
-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Vehicle Identification Number (VIN) from: A138351
- Engine Code: M 113.960
- Cable Length [mm]: 470
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
KLASA E (W210), 06.9
(kvaliteediklass: PJ)"
- Construction Year from: 06.2000
- Construction Year to: 09.2004
- Transmission Type: Automatic Transmission
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Length [mm]: 470
- Number of circuits: 4
- Manufacturer: VDO
Fitting Position: Left, before catalytic converter, Right, after catalytic converter
- Construction Year to: 06.2000
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Emission Standard: D4
-
Vehicle Identification Number (VIN) to: A 168239,
A 138350 - not for Component Number: 801
- Block Separation:
- Number of circuits: 4
- Overall Length [mm]: 347
- Available as universal article as well, see article no.: 0258986505
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- not for emission standard: D4
-
Vehicle Identification Number (VIN) from: A 138351,
A 087201 - Block Separation:
- Construction Year from: 07.2000
- not for Component Number: 800
- Number of circuits: 4
- Overall Length [mm]: 340
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
-
Vehicle Identification Number (VIN) from: A 087201,
A 138351 - not for Component Number: 800
- Block Separation:
- Number of circuits: 4
- Overall Length [mm]: 480
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Emission Standard: D4
- Vehicle Identification Number (VIN) from: A138351
- Length [mm]: 400
- Technical Information Number: Universal 77015
- Manufacturer: FAE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks