• Fitting Position: Rear Axle
• Suspension: for vehicles without bad road version
• Vehicle Equipment: for vehicles without electric parking brake
• for SA code: AI1
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Brake Disc Type: solid
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 71
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 180
• Bore Ø [mm]: 15
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Vehicle Equipment: for vehicles without electric parking brake
• Rim Size [inch]: 16.0
• for SA code: RS3
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Rim Hole Number: 6
• Height [mm]: 71
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Outer Diameter [mm]: 298
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Brake Disc Hub Height [mm]: 55
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Rim Size [inch]: 16.0
• Vehicle Equipment: for vehicles without electric parking brake
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71.2
• Rim Hole Number: 6
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Hub Diameter [mm]: 190
• Weight [kg]: 7.38
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Vehicle Equipment: for vehicles with electric parking brake
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Number of Holes: 6
• Surface: Coated

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 6
• Test Mark: E1 90R-02C0344/1962
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16.3
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Height [mm]: 71.4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG4033

• Fitting Position: Front Axle
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Brake Disc Type: Vented
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 68.5
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 155
• Bore Ø [mm]: 15
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Vehicle Equipment: for vehicles without electric parking brake
• Rim Size [inch]: 16
• for SA code: RS3, Z12
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Number of Holes: 6
• Surface: Coated

• Vehicle Equipment: for vehicles without electric parking brake
• Suspension: for vehicles without heavy duty suspension
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16.3
• Outer Diameter [mm]: 298
• Height [mm]: 71.4
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Surface: Painted
• Weight [kg]: 15.45
• Minimum thickness [mm]: 14
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Rim Size [inch]: 16
• for SA code: RS3
• for article number: LP3549
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 6
• Test Mark: E1 90R-02C0344/1962
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Coated
• Machining: High-carbon
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16.3
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Height [mm]: 71.4
• Name: DE BG5124C
• Manufacturer: DELPHI

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 6
• Number of mounting bores: 1
• Thickness [mm]: 68.4
• Outer Diameter [mm]: 300
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 25
• Centering Diameter [mm]: 85
• Weight [kg]: 9.227
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Brake Disc Type: solid
• Height [mm]: 562
• Rim Hole Number: 6
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Suspension: for vehicles without heavy duty suspension
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71
• Minimum thickness [mm]: 14
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 16
• Weight [kg]: 7.4
• Manufacturer: MINTEX

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 6
• Number of mounting bores: 1
• Thickness [mm]: 68.4
• Outer Diameter [mm]: 300
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 25
• Centering Diameter [mm]: 85
• Weight [kg]: 9.227
• Name: SW 10 92 7698
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71
• Rim Hole Number: 6
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ECE R90 APPROVED
• Registration Type: permitted for vehicles of Class M1/N1
• Minimum thickness [mm]: 14
• Weight [kg]: 7.3
• Hole Arrangement/Number: 7/6
• Manufacturer: ZIMMERMANN

• Brake Disc Thickness [mm]: 18
• Rim Hole Number: 6
• Number of mounting bores: 1
• Thickness [mm]: 71
• Outer Diameter [mm]: 298
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 16
• Centering Diameter [mm]: 85
• Weight [kg]: 8
• for OE number: 910 423 02 00 07
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• for article number: LP3549
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 6
• Test Mark: E1 90R-02C0344/1962
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Coated
• Machining: High-carbon
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Minimum thickness [mm]: 16
• Centering Diameter [mm]: 85
• Height [mm]: 56.2
• Name: DE BG5049C
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• for SA code: Z12, RS3
• for article number: LP3549
• Block Separation:
• Rim Size [inch]: 16
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 6
• Test Mark: E1 90R-02C0344/1962
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Coated
• Machining: Untreated
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Minimum thickness [mm]: 16
• Centering Diameter [mm]: 85
• Height [mm]: 71
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG5085C

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Height [mm]: 56.2
• Minimum thickness [mm]: 16
• Surface: Coated
• Inner Diameter [mm]: 179
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Wheel Bolt Bore Ø [mm]: 15.2
• Packaging length [cm]: 31.3
• Packaging width [cm]: 31.3
• Packaging height [cm]: 14
• Weight [kg]: 7.6
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Height [mm]: 56.2
• Minimum thickness [mm]: 16
• Surface: Coated
• Inner Diameter [mm]: 179
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Wheel Bolt Bore Ø [mm]: 15.2
• Weight [kg]: 7.6
• Technical Information Number: 56010PRO
• Name: HE 8DD355131831
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 68.5
• Minimum thickness [mm]: 25
• Surface: Coated
• Inner Diameter [mm]: 154.8
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Wheel Bolt Bore Ø [mm]: 15.2
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 16
• Weight [kg]: 8.6
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Suspension: for vehicles with heavy duty suspension
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Height [mm]: 71.1
• Minimum thickness [mm]: 16
• Surface: Coated
• Inner Diameter [mm]: 180
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Wheel Bolt Bore Ø [mm]: 15.2
• Weight [kg]: 7.8
• Technical Information Number: 56011PRO
• Name: HE 8DD355131841
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• for SA code: AI1
• Thread Size: 15,3
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16.3
• Minimum thickness [mm]: 14
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Height [mm]: 71.4
• Bolt Hole Circle Ø [mm]: 130
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0204/0605
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles without bad road version
• Vehicle Equipment: for vehicles without electric parking brake
• for SA code: AI1
• Quantity per packing unit: 2
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 71
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 180
• Bore Ø [mm]: 15
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0248/1051
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Fitting Position: Front Axle
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Brake Disc Type: Vented
• Machining: Alloyed/High-carbon
• Surface: Coated
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 68.5
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 155
• Bore Ø [mm]: 15
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0115/0047
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Rim Size [inch]: 16
• Brake Size: 16"
• for SA code: RS3
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 71
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 298
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 14
• Tightening Torque [Nm]: 175
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Height [mm]: 56.2
• Rim Hole Number: 6
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Hub Diameter [mm]: 190
• Weight [kg]: 7.54
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Suspension: for vehicles without heavy duty suspension
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 16
• Height [mm]: 71
• Minimum thickness [mm]: 14
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 7.4
• Technical Information Number: 59433
• Name: HE 8DD355117641
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Rim Size [inch]: 16.0
• Vehicle Equipment: for vehicles without electric parking brake
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Height [mm]: 71
• Rim Hole Number: 6
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Hub Diameter [mm]: 190
• Weight [kg]: 7.77
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Height [mm]: 56
• Rim Hole Number: 6
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ECE R90 APPROVED
• Registration Type: permitted for vehicles of Class M2/N2
• Minimum thickness [mm]: 16
• Weight [kg]: 7.5
• Hole Arrangement/Number: 7/6
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 69
• Rim Hole Number: 6
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 25
• Weight [kg]: 9.3
• Hole Arrangement/Number: 7/6
• Manufacturer: ZIMMERMANN

Registration Type: permitted for vehicles of Class M1/N1, permitted for vehicles of Class M2/N2

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 68.5
• Minimum thickness [mm]: 25
• Surface: Coated
• Inner Diameter [mm]: 154.8
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 06/07
• Wheel Bolt Bore Ø [mm]: 15.2
• Weight [kg]: 8.6
• Technical Information Number: 56012PRO
• Name: HE 8DD355131891
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Rim Size [inch]: 16
• Brake Size: 16"
• for SA code: RS3, Z12
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 18
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 71
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 298
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 16
• Name: BR 08.D045.11
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Rim Size [inch]: 16
• Brake Size: 16"
• for SA code: RS3
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 69
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 300
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 25
• Name: BR 09.A895.11
• Manufacturer: BREMBO

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• Brake Disc Type: solid
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Minimum thickness [mm]: 16
• Number of Holes: 6
• Thread Size: 15,3
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 56.2
• Centering Diameter [mm]: 85
• Colour: black
• Surface: Painted
• Test Mark: E1 90R-02 C0190/0605
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Suspension: for vehicles with heavy duty suspension
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Height [mm]: 71
• Rim Hole Number: 6
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ECE R90 APPROVED
• Registration Type: permitted for vehicles of Class M2/N2
• Minimum thickness [mm]: 16
• Weight [kg]: 7.8
• Hole Arrangement/Number: 7/6
• Manufacturer: ZIMMERMANN

• Construction Year from: 11.2020
• Fitting Position: Rear Axle
• for OE number: 910 423 21 00
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Minimum thickness [mm]: 16
• Height [mm]: 56.2
• Bolt Hole Circle Ø [mm]: 130
• Brake Disc Type: solid
• Centering Diameter [mm]: 85
• Number of Holes: 6
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 15.3
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Height [mm]: 71
• Weight [kg]: 7.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Outer Diameter [mm]: 298
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Tightening Torque [Nm]: 175
• Bolt Hole Circle Ø [mm]: 130
• Surface: Oiled
• Packing Type: Box
• Quantity Unit: Piece
• Supplementary Article/Info 2: without bolts/screws
• Version: J
• Packaging length [cm]: 31
• Packaging width [cm]: 31
• Packaging height [cm]: 10
• Manufacturer: JURID

• Fitting Position: Rear Axle
• for SA code: Z12
• Vehicle Equipment: for vehicles without electric parking brake
• Brake Disc Type: solid
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 18
• Minimum thickness [mm]: 16
• Number of Holes: 6
• Thread Size: 15,3
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 71.2
• Centering Diameter [mm]: 85
• Colour: black
• Surface: Painted
• Test Mark: E1 90R-02 C0204/0605
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 18
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 56
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 298
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 16
• Manufacturer: BREMBO
• Name: BR 08.D046.11

• Construction Year from: 11.2020
• Fitting Position: Rear Axle
• for OE number: 910 423 02 00, 910 423 03 00
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 18
• Minimum thickness [mm]: 16
• Height [mm]: 71.4
• Bolt Hole Circle Ø [mm]: 130
• Brake Disc Type: solid
• Centering Diameter [mm]: 85
• Number of Holes: 6
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 15.3
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without electric parking brake
• Quantity per packing unit: 2
• Height [mm]: 71
• Weight [kg]: 15.81
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 18
• Minimum thickness [mm]: 16
• Outer Diameter [mm]: 298
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: without bolts/screws
• Version: JC
• Number of mounting bores: 1
• Packaging length [cm]: 31
• Packaging width [cm]: 31
• Packaging height [cm]: 16.5
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Construction Year from: 11.2020
• for OE number: 910 423 00 00, 910 423 01 00
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 6
• Supplementary Article/Info 2: with bolts/screws
• Machining: High-carbon
• Outer Diameter [mm]: 298
• Brake Disc Thickness [mm]: 15.9
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Height [mm]: 71
• Bolt Hole Circle Ø [mm]: 130
• Drill Diameter, up to [mm]: 15
• Quality class: PJ
• Name: Brake discs

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• paired article number: 2919209560
• Quantity per packing unit: 2
• Height [mm]: 69
• Weight [kg]: 8.6
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 25
• Outer Diameter [mm]: 300
• Number of Holes: 6
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Surface: Oiled
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: without bolts/screws
• Version: J
• Number of mounting bores: 1
• Packaging length [cm]: 30.5
• Packaging width [cm]: 30.5
• Packaging height [cm]: 9.6
• Manufacturer: JURID