• Transmission Code: 7G-Tronic (722.901-7
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Transmission Type: 7-Speed Automatic Transmission
• Filter type: Filter Insert
• Lisainfo: Hydraulic Filter, automatic transmission
• Additional information: Hydraulic Filter, automatic transmission

• Filter type: Screen Filter
• Thickness [mm]: 6
• Outer Diameter [mm]: 12
• Weight [kg]: 0.005
• Manufacturer: FEBI

Transmission Type: 5-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 722.6
• Filter type: Screen Filter
• Thickness [mm]: 12.5
• Outer Diameter [mm]: 8
• Weight [kg]: 0.005
• Manufacturer: FEBI BILSTEIN

Transmission Type: 5-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission ID: 722.6
• Filter type: Screen Filter
• Thickness [mm]: 12.5
• Outer Diameter [mm]: 8
• Weight [kg]: 0.005
• Name: SW 10 94 7283
• Manufacturer: SWAG

Transmission Type: 5-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Transmission Code: 5G TRONIC
• Transmission Type: 5-Speed Automatic Transmission
• Width [mm]: 112
• Height [mm]: 46
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: KAMOKA

• Transmission Type: 5-Speed Automatic Transmission
• Transmission ID: 722.6
• Filter type: Screen Filter
• Length [mm]: 193
• Width [mm]: 113
• Height [mm]: 53
• Outer Diameter [mm]: 28
• Material: Steel
• Weight [kg]: 0.155
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 5-Speed Automatic Transmission
• Transmission ID: 722.6
• Filter type: Screen Filter
• Length [mm]: 193
• Width [mm]: 114
• Thickness [mm]: 52
• Height [mm]: 51
• Seal Material: ACM (Polyacrylate)
• Weight [kg]: 0.23
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: BLUEPRINT
• Additional information: ADA102132
• Lisainfo: ADA102132

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 5-Speed Automatic Transmission
• Transmission ID: 722.6
• Filter type: Screen Filter
• Length [mm]: 193
• Width [mm]: 114
• Height [mm]: 51
• Seal Material: ACM (Polyacrylate)
• Weight [kg]: 0.441
• Supplementary Article/Info 2: with oil sump gasket
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Additional information: F10098
• Lisainfo: F10098

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 5-Speed Automatic Transmission
• Width [mm]: 84
• Height [mm]: 51
• Filter type: Filter Insert
• Fabrication Number: FSF-CH-003
• Article number of recommended accessories: BMO-CH-011
• Manufacturer: NTY
• Name: NTY FSF-CH-003

• Transmission Code: 722.600 - 722.699
• Filter type: Suction Filter
• Height [mm]: 18
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Length [mm]: 186.9
• Width [mm]: 112
• Height [mm]: 50.4
• Inner Diameter 2 [mm]: 29
• Transmission Code: 722.6, W5A 330, W5A 380, W5A 580, W5A 900
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Soft Material Gasket
• Recommended change interval [km]: 50,000
• Packaging length [cm]: 17.9
• Net Weight [g]: 230
• Packaging height [cm]: 30.4
• Packaging width [cm]: 5.8
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN HX81D

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission

• Engine Code: OM 646.961
• Filter type: Filter Insert
• Length [mm]: 187
• Width [mm]: 125
• Height [mm]: 51
• Manufacturer: HENGST FILTER

• Height [mm]: 18
• Supplementary Article/Info 2: with oil sump gasket
• SVHC: No SVHC present!
• Manufacturer: METALCAUCHO

• Filter type: Filter Insert
• Width [mm]: 112
• Height [mm]: 50.4
• Inner Diameter 2 [mm]: 29
• Transmission Code: 722.6, W5A 330, W5A 380, W5A 580, W5A 900
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Soft Material Gasket
• Recommended change interval [km]: 50,000
• Packaging width [cm]: 5.8
• Packaging length [cm]: 17.9
• Net Weight [g]: 230
• Packaging height [cm]: 30.4
• Manufacturer: MAHLE KNECHT
• Lisainfo: HX 81D MAH
• Additional information: HX 81D MAH

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission

• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: 722.6, W5A330, W5A38
• Filter type: Filter Insert
• Height [mm]: 78
• Outer Diameter [mm]: 43.8
• Inner Diameter [mm]: 37
• Manufacturer: PURFLUX

• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• See accessories list for additionally required parts:
• Fabrication Number: FSF-ME-003
• Manufacturer: NTY
• Name: NTY FSF-ME-003

• Filter type: Filter Insert
• Width [mm]: 112
• Height [mm]: 50
• Height 1 [mm]: 18
• Inner Diameter [mm]: 29
• Transmission Type: Automatic Transmission
• Gasket Design: Soft Material Gasket
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

• Filter type: Filter Insert
• Length [mm]: 200
• Width [mm]: 110
• Height [mm]: 50
• Manufacturer: KOLBENSCHMIDT

• Transmission Code: 722,9, 7G-Tronic
• Transmission Type: 7-Speed Automatic Transmission
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Inner Diameter [mm]: 21
• Supplementary Article/Supplementary Info: with gasket/seal
• Recommended change interval [km]: 50,000
• Recommended change interval [years]: 5
• Name: BM FR0243
• Manufacturer: BREMSI

• Transmission Code: 722.600 - 722.699
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Width [mm]: 111
• Height [mm]: 18
• Outer Diameter [mm]: 28
• SVHC: No SVHC present!
• Manufacturer: MANN
• Lisainfo: H 182 KIT MAN
• Additional information: H 182 KIT MAN

• Transmission Code: 7G-Tronic, 722,9
• See accessories list for additionally required parts:
• Supplementary Article/Supplementary Info: with gasket/seal
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: for 7-speed automatic transmission, 7-Speed Automatic Transmission Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: with gasket/seal
• See accessories list for additionally required parts:
• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: 722,6
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 4
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: 722.6
• Filter type: Filter Insert
• Height [mm]: 52
• Length [mm]: 188
• Width [mm]: 126
• Manufacturer: PURLFUX

• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: W5A 300-580, 722.6.., DGJ/DGU
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: ELRING

• Transmission Code: 7G-Tronic (722.901-7
• Filter type: Suction Filter
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Inner Diameter [mm]: 21
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Filter Insert
• Transmission Code: 722,9, 7G-Tronic
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Info 2: with bolts
• Quality class: PJ
• Name: Automatic transmission filter

Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 Supplementary Article/Supplementary Info: with accessories, with gasket/seal, with guide bolts

• Transmission Type: 7-Speed Automatic Transmission
• Length [mm]: 268
• Width [mm]: 175
• Height [mm]: 58
• Weight [kg]: 0.495
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: FEBI BILSTEIN

Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 7-Speed Automatic Transmission
• Length [mm]: 268
• Width [mm]: 175
• Height [mm]: 58
• Weight [kg]: 0.495
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: BLUEPRINT

Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 7-Speed Automatic Transmission
• Length [mm]: 268
• Width [mm]: 175
• Height [mm]: 58
• Weight [kg]: 0.495
• Supplementary Article/Info 2: with oil sump gasket
• Name: SW 10 93 0157
• Manufacturer: SWAG

Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with automatic transmission
• Filter type: Filter Insert
• Length [mm]: 268
• Width [mm]: 175
• Height [mm]: 58
• Manufacturer: HENGST FILTER
• Lisainfo: EG841H D449
• Additional information: EG841H D449

• Transmission Code: 7G-Tronic (722.901-7
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Inner Diameter [mm]: 21
• SVHC: No SVHC present!
• Manufacturer: MANN+HUMMEL

• Recommended change interval [km]: 50,000
• Recommended change interval [years]: 3
• Transmission Type: 5-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Transmission Code: 722,6
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with plug
• Manufacturer: VAICO
• Lisainfo: V30-7313 VAI
• Additional information: V30-7313 VAI

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 722,9, 7G-Tronic
• Supplementary Article/Supplementary Info: with gasket/seal, with accessories
• Supplementary Article/Info 2: with bolts/screws
• See accessories list for additionally required parts:
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: for 7-speed automatic transmission, 7-Speed Automatic Transmission Transmission ID: 722.901-.909, .930-.932, .950, .951, .960-.967, .980, .982, .995-.999 General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.