Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Filter type: Filter Insert
- Height [mm]: 99
- Outer Diameter [mm]: 38
- Seal Diameter [mm]: 61
- Weight [kg]: 0.025
- Manufacturer: DENCKERMANN FILTRY
- Filter type: Filter Insert
- Height [mm]: 99
- Outer Diameter [mm]: 38
- Fitting Position: Upper
- Seal Diameter [mm]: 61
- Weight [kg]: 0.025
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Height [mm]: 99
- Outer Diameter [mm]: 38
- Fitting Position: Upper
- Seal Diameter [mm]: 61
- Weight [kg]: 0.025
- Name: SW 10 10 5810
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Diameter [mm]: 40.5
- Height [mm]: 101.5
- Inner Diameter 2 [mm]: 15
- Packaging height [cm]: 14.5
- Net Weight [g]: 38
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
- Manufacturer: KNECHT
- Name: KN HX232D
-
Transmission Type: for 7-
speed dual- clutch transmission - Length [mm]: 231
- Width [mm]: 165
- Height [mm]: 123
- Weight [kg]: 0.582
- Manufacturer: DENCKERMANN FILTRY
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Length [mm]: 231
- Width [mm]: 165
- Height [mm]: 123
- Weight [kg]: 0.376
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Length [mm]: 231
- Width [mm]: 165
- Height [mm]: 123
- Weight [kg]: 0.376
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Length [mm]: 231
- Width [mm]: 165
- Height [mm]: 122.1
- Inner Diameter 2 [mm]: 18
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Transmission Code: 724.0
- Gasket Design: Metal Elastomer Gasket
- Number of Holes: 8
-
Recommended change interval [km]: 50,
000 - Packaging height [cm]: 12.5
- Packaging length [cm]: 32
- Packaging width [cm]: 40
- Net Weight [g]: 511
- Name: KN HX161D
- Manufacturer: KNECHT
- Shock Absorber Design: Suspension Strut
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - See accessories list for additionally required parts:
- Clutch: for vehicles with double clutch
-
Transmission Code: 724,
0 - Weight [kg]: 0.629
- Filter type: Filter Insert
-
Recommended change interval [km]: 50,
000 - Recommended change interval [years]: 3
- Manufacturer: VAICO
Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Transmission Code: 724.0__
- Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: METZGER
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Transmission Code: 724.0__
-
Filter type: Filter Insert,
Suction Filter - Number of filters: 2
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Supplementary Article/Info 2: with bolts/
screws, with sealing plug - Alternative Repair Kit: 8020069
- Manufacturer: METZGER
-
Recommended change interval [km]: 50,
000 - Recommended change interval [years]: 3
-
Supplementary Article/Info 2: with bolts/
screws - See accessories list for additionally required parts:
-
Transmission Code: 724,
0 - Supplementary Article/Supplementary Info: with seal
- Clutch: for vehicles with double clutch
- Weight [kg]: 0.667
- Manufacturer: VAICO
Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks