Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 38
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Puks -
Kndmik DB T. W124 B T - Manufacturer: MEY
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 43
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Puks -
Kndmik DB T. W124 - Manufacturer: MEY
- Quantity per packing unit: 2
- Axle alignment required after fitting:
- Fitting Position: Rear Axle
- Length [mm]: 38
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 36
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Lisainfo: Track control arm, rear
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Rod/Strut: Pull Rod
- Length [mm]: 247
- Material: Sheet Steel
- Quantity Unit: Piece
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: MAX
-
Fitting Position: Rear Axle Upper,
inner - Control/Trailing Arm Type: Control Arm
- Rod/Strut: Push Rod
- Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Upper,
Rear Axle Right, Front, Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 247
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: MEY
-
Fitting Position: Rear Axle Right,
Rear, Rear Axle Left - Rod/Strut: Camber Link
- Article number of recommended accessories: 21685 01
- Manufacturer: LEMFORDER
- Name: LMI 2963101
- Fitting Position: Rear Axle Lower
- Rod/Strut: Push Rod
-
Lisainfo: Link,
wheel suspension -
Additional information: Link,
wheel suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Rod/Strut: Pull Rod
-
Alternative Repair Kit: V30-
7541 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Control/Trailing Arm Type: Control Arm
- Rod/Strut: Pressure Rod
- Cone Size [mm]: 14
- Length [mm]: 257
-
Name: Ootshoovad -
Kndmik DB T. W203 LE/ PR - Manufacturer: MAX
- Rod/Strut: Pull Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Width [mm]: 370,
63 - Height [mm]: 40
-
Fitting Position: Rear Axle,
Lower - Rod/Strut: Push Rod
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Name: Control arm left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
MERCEDES 201 (190)
(kvaliteediklass: PJ)"
-
Fitting Position: Upper,
Rear Axle Right, Front, Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 247
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR KPL ZE RUBAMI
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Front, Lower - Rod/Strut: Guide Rod
- Length [mm]: 315
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left, Rear - Rod/Strut: Guide Rod
- Length [mm]: 298
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR GàRNY - Manufacturer: MEY
- Fitting Position: Rear Axle
- Rod/Strut: Pull Rod
- Material: Sheet Steel
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 821093510
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Front - Rod/Strut: Pull Rod
- Article number of recommended accessories: 21685 01
-
Name: Ootshoovad -
Kndmik DB T. W124/ 201 LE/ PR - Manufacturer: LMI
- Fitting Position: Rear Axle
- Rod/Strut: Camber Link
-
paired article number: V30-
7542 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 210 350 3306
- Fitting Position: Rear Axle both sides
- Rod/Strut: Pull Rod
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Rear - Rod/Strut: Camber Link
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LMI
Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR GàRNY KPL ZE RUBAMI
- Rod/Strut: Pull Rod
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Front -
Name: Stabilisaator,
kndmik - Manufacturer: LMI
-
Fitting Position: Rear Axle Right,
Lower, Rear Axle Left, Front - Rod/Strut: Push Rod
- Article number of recommended accessories: 21685 01
- Manufacturer: LEMFORDER
- Lisainfo: 29630 01 LEM
- Additional information: 29630 01 LEM
-
Fitting Position: Rear Axle Right,
Front, Rear Axle Left, Lower - Rod/Strut: Guide Rod
- Length [mm]: 315
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD KPL ZE RUBAMI
-
Fitting Position: Front,
Rear Axle Left, Rear Axle Right, Upper - Rod/Strut: Pull Rod
- Length [mm]: 247
-
Guarantee: 3 years guarantee or up to 75,
000km - Manufacturer: METZGER
-
Fitting Position: Upper,
Rear Axle Right, Rear, Rear Axle Left - Rod/Strut: Guide Rod
- Length [mm]: 298
- Supplementary Article/Supplementary Info: with accessories
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR GàRNY KPL ZE RUBAMI
- Quantity Unit: Set
-
Fitting Position: both sides,
Rear Axle Upper -
paired article number: V30-
7138 - Rod/Strut: Camber Link
- Supplementary Article/Info 2: with fastening material
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Rod/Strut: Camber Link
- Material: Sheet Steel
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 821093610
-
Fitting Position: Rear Axle Right,
Lower, Rear Axle Left, Front - Rod/Strut: Push Rod
- Supplementary Article/Supplementary Info: with accessories
- Manufacturer: LMI
Name: Ootshoovad - Kndmik DB T. W124/201 LE/PR DOLNY PRZàD KPL ZE RUBAMI
- Fitting Position: Rear Axle
- Rod/Strut: Push Rod
- Material: Sheet Steel
- SVHC: No SVHC present!
-
Name: Stabilisaator,
kndmik - Manufacturer: FAG
-
Fitting Position: Rear Axle,
Lower - Thread Size: 20
- Rod/Strut: Guide Rod
- Length [mm]: 295
- Width [mm]: 40
- Height [mm]: 65
- Manufacturer: DELPHI
- Name: DE TC2458
- Length [mm]: 257
-
External Thread Size: M10 x 1,
5 - Rod/Strut: Guide Rod
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower, Rear - Weight [kg]: 0.61
-
Supplementary Article/Info 2: with rubber mount,
with ball joint -
Name: Stabilisaator,
kndmik - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Rear, Lower - Rod/Strut: Guide Rod
- Length [mm]: 257
-
Thread Size: M10x1,
5 - Material: Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Ootshoovad -
Kndmik DB T. W203 LE/ PR - Manufacturer: MEY
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Rear, Lower - Rod/Strut: Guide Rod
- Length [mm]: 315
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Right,
Rear, Rear Axle Left - Control/Trailing Arm Type: Control Arm
- Rod/Strut: Pressure Rod
- Length [mm]: 257
- Cone Size [mm]: 14
-
Name: Ootshoovad -
Kndmik DB T. W203 LE/ P - Manufacturer: LMI
- Rod/Strut: Push Rod
- Fitting Position: Rear Axle
- Weight [kg]: 6.06
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - for OE number: 210 350 38 06 S2
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks