Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Pikkus (mm): 102
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Sensor,
brake lining wear, front -
Additional information: Sensor,
brake lining wear, front
Lisainfo: Sensor, brake lining wear, front
- Fitting Position: Rear Axle
- Brake Caliper Type: Brake Caliper with 1 holding pin
- Vehicle Equipment: for vehicles without sports package
- Manufacturer Restriction: ATE
-
Netokaal [kg]: 0,
06
- Vehicle Equipment: for vehicles with sports package
- Installatsiooni pool: Tagasild
- Pidurisüsteem: ATE
- Manufacturer: JP GROUP
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Anduritüüp: Hallsensor
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Sensor,
wheel speed -
Additional information: Sensor,
wheel speed
- Quantity per packing unit: 10
-
Fitting Position: Front Axle both sides,
Rear Axle both sides - Bolt Head-/Nut Design: Female Torx
- Length [mm]: 12
- Thread Size: M8 x 1
-
Spanner Size: Innen-
Torx - External Thread [mm]: M 8 x 1
-
Quality/ Grade: 8,
8 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front Axle,
Rear Axle - Block Separation:
- Pikkus (mm): 12
- Väliskeerme mõõde: M8 x 1
- Võtmekaugus: T30
-
Kruvipea-/Mutriprofiil: sise-
Torx -
Pealispind: Tsink-
lamell- kattega -
Kaal (kg): 0,
004 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 12
- Keermemõõt: M8x1
-
Name: KRUVI,
PIDURIKETAS - Manufacturer: MEY
- Fitting Position: Rear Axle
- Required quantity: 1
- Brake Type: Disc Brake
- Length [mm]: 98
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Vehicle Equipment: for vehicles with AMG Sports Package
- Piduriliik: Ketaspidur
-
Installatsiooni pool: Esisild,
Tagasild - OE-numbri jaoks: 1695401617
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Additional information: 105021 KAMOKA
- Lisainfo: 105021 KAMOKA
- Brake System: ATE
- Piduriliik: Ketaspidur
- Pikkus (mm): 97
- Installatsiooni pool: Tagasild
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MAX
-
Lisainfo: 2115401717/
MG -
Additional information: 2115401717/
MG
- Vehicle Equipment: for vehicles with AMG Sports Package
- Piduriliik: Ketaspidur
- Installatsiooni pool: Esisild
- Manufacturer: KAMOKA
-
Fitting Position: Rear Axle,
Front Axle - Brake Type: Disc Brake
- Length [mm]: 94
- Manufacturer: JPN
-
Fitting Position: Front Axle,
Rear Axle - Block Separation:
- Pikkus (mm): 95
- Kulumishoiatus kontakt: Detektor muutuda piduriklotsid
- Piduriliik: Ketaspidur
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Brake Type: Disc Brake
-
Fitting Position: Front Axle,
Rear Axle - Length [mm]: 95
- Manufacturer: 3RG
- Required quantity: 1
- Piduriliik: Ketaspidur
-
Installatsiooni pool: Esisild,
Tagasild -
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: MAX
-
Lisainfo: 20-
0334 -
Additional information: 20-
0334
- Fitting Position: Front Axle
- Brake Type: Disc Brake
-
Manufacturer Restriction: BREMBO,
LUCAS - Pikkus (mm): 100
- Kulumisnäidikute arv [ühe telje kohta]: 2
-
Netokaal [kg]: 0,
01 -
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: NK
- Quantity per packing unit: 10
- Brake Type: Disc Brake
-
Fitting Position: Front Axle both sides,
Rear Axle both sides - Length [mm]: 95
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Required quantity: 1
- Piduriliik: Ketaspidur
- Installatsiooni pool: Esisild
- Hoiatuskontakti pikkus (mm): 92
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Brake System: ATE
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: QBK
- Fitting Position: Front Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 95
-
Kaal (kg): 0,
03 - Kulumisnäidikute arv [ühe telje kohta]: 1
- Manufacturer: A.B.S.
- Vehicle Equipment: for vehicles with AMG Sports Package
- Piduriliik: Ketaspidur
- Installatsiooni pool: esisild vasakul
- vajaminev tükihulk: 2
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MAX
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: TRW
- Length [mm]: 97
- Supplementary Article/Supplementary Info: Axle Kit
- Manufacturer: QUICK BRAKE
-
Fitting Position: Rear Axle,
Front Axle - Pikkus (mm): 94
- Piduriliik: Ketaspidur
-
Kaal (kg): 0,
004 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles without sports package
- Installatsiooni pool: Tagasild
- Pidurisüsteem: ATE
-
Fitting Position: Rear Axle,
Front Axle - Pikkus (mm): 94
- Piduriliik: Ketaspidur
-
Kaal (kg): 0,
004 - Name: SW 10 91 9186
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Required quantity: 1
- Piduriliik: Ketaspidur
-
Pikkus (mm): 97,
5 - Manufacturer: LPR
- Fitting Position: Rear Axle
- Brake System: ATE
- Manufacturer: PROFIPOWER
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Pidurisüsteem: ATE
-
Kaal (kg): 0,
05 - Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Required quantity: 1
- Piduriliik: Ketaspidur
- Hoiatuskontakti pikkus (mm): 95
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MEY
- Piduriliik: Ketaspidur
-
Installatsiooni pool: Tagasild,
Esisild - valikuliselt:
- Hoiatuskontakti pikkus (mm): 97
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 4
-
Fitting Position: Rear Axle both sides,
Front Axle both sides - Weight [kg]: 0.004
- Brake Type: Disc Brake
- Overall Length [mm]: 95
- Weight [g]: 4
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Pikkus (mm): 13
- Keermemõõt: M8x1
- Pöördeliik: koos väliskeermega
-
Võtmekaugus: Torx-
30 -
Name: Kruvi,
piduriketas - Manufacturer: TRI
- Fitting Position: Front Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 95
- Kulumisnäidikute arv [ühe telje kohta]: 1
- Manufacturer: BREMBO
- Name: BR A 00 377
- Installatsiooni pool: Tagasild
- Pidurisüsteem: ATE
- Pidurisadulateostus: Pidurisadul koos 2 kinnituskiiluga
-
Name: Lisakomplekt,
ketaspiduriklotsid - Manufacturer: MAX
- Fitting Position: Rear Axle
- Brake System: Teves
- Weight [kg]: 0.056
- Manufacturer: TOMEX BRAKES
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Length [mm]: 13
- Thread Size: M8x1
- Thread Type: with external thread
-
Spanner Size: Torx-
30 -
Name: Kruvi,
piduriketas - Manufacturer: QBK
- Installatsiooni pool: Tagasild
- Pidurisüsteem: ATE
-
Kaal (kg): 0,
054 - Manufacturer: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Alternatively:
- Pikkus (mm): 97
- Piduriliik: Ketaspidur
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: BOS
-
Fitting Position: Front Axle,
Rear Axle - Block Separation:
- Pikkus (mm): 95
- Piduriliik: Ketaspidur
- Manufacturer: BOSCH
- Name: BS 1987473070
- Fitting Position: Rear Axle
- Brake System: ATE
- Manufacturer: PROFIPOWER
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Pikkus 1 [mm]: 100
- Piduriliik: Ketaspidur
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LZ0153
- Quality class: PJ
Additional information: "Tootja: DELPHI
KLASA C T-MODEL (S20
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
KLASA C T-MODEL (S20
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Pidurisüsteem: ATE
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2388A
-
Fitting Position: Rear Axle,
Front Axle - Required quantity: 1
- Block Separation:
- Piduriliik: Ketaspidur
- Pikkus 1 [mm]: 55
- Hoiatuskontakti pikkus (mm): 100
- Manufacturer: OPTIMAL ZAWIESZENIE
-
Fitting Position: Rear Axle,
Front Axle - Block Separation:
- Brake Type: Disc Brake
- Weight [kg]: 1.05
- Warning Contact Length [mm]: 100
- Manufacturer: TOMEX BRAKES
- Fitting Position: Front Axle
-
Pidurisüsteem: TRW/
LUCAS - Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2475A
- Brake System: TRW
- Installatsiooni pool: Esisild
-
Name: Lisakomplekt,
ketaspiduriklotsid - Manufacturer: MAX
- Fitting Position: Front Axle
- Quantity per packing unit: 2
-
Pikkus (mm): 12,
5 - Keermemõõt: M8x1
- Materjal: Metall
-
Pealispind: Kroom-
(VI)- vaba passiveerimine -
Kruvipea-/Mutriprofiil: sise-
Torx - ka universaaltootena saadav vaata toode-nr.: TPM1000
-
Kaal (kg): 0,
003 -
Name: Kruvi,
piduriketas - Manufacturer: TEX
- Quantity per packing unit: 2
- Thread Size: M8 x 12
- Required quantity: 2
- Observe the vehicle manufacturer specifications:
- Manufacturer: METZGER
- Fitting Position: Front Axle Left
- Vehicle Equipment: for vehicles with AMG Sports Package
- Piduriliik: Ketaspidur
- Hoiatuskontakti pikkus (mm): 101
- vajaminev tükihulk: 2
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MEY
- Fitting Position: Front Axle
- Piduriliik: Ketaspidur
- Pikkus (mm): 95
- pakendi pikkus [cm]: 20
- pakendi laius [cm]: 12
- pakendi kõrgus [cm]: 1
-
Kaal (kg): 0,
004 -
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: TEX
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Piduriliik: Ketaspidur
- Pikkus (mm): 100
- Kulumisnäidikute arv [ühe telje kohta]: 2
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: TRW
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: TRW
- Pikkus (mm): 97
- Piirangutega toode/piirangu info: Sillakomplekt
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: TRI
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package
- Pidurisüsteem: ATE
-
Kaal (kg): 0,
06 - Tootja piirang: ATE
- Manufacturer: A.B.S.
- Required quantity: 1
- Fitting Position: Rear Axle
- Piduriliik: Ketaspidur
-
Pikkus (mm): 97,
5 -
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE
- Installatsiooni pool: Tagasild
- Pidurisüsteem: Ate
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2964A
- Fitting Position: Front Axle
- Brake System: TRW
-
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: QBK
- Fitting Position: Rear Axle
- Tootja piirang: ATE
- Poldipikkus (mm): 79
-
SVHC: Infot ei ole,
palun pöörduge tootja poole! -
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: TRW
- Quality class: Q
-
Installatsiooni pool: Esisild,
Tagasild -
Pidurisüsteem: TRW,
Bosch, Lucas - Manufacturer: FRENKIT
- Name: FR 901230
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Piduriliik: Ketaspidur
- Pikkus (mm): 102
- Pikkus 2 [mm]: 110
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: TRW
- Installatsiooni pool: Tagasild
-
Pidurisüsteem: ATE
(Teves) - Manufacturer: FRENKIT
- Name: FR 901217
- Vehicle Equipment: for vehicles with sports package
- Installatsiooni pool: Esisild
- Pidurisüsteem: BREMBO
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
- Piduriliik: Ketaspidur
- Pikkus (mm): 95
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: TRW
- Quality class: Q
- Fitting Position: Rear Axle
- Brake System: ATE
- Quantity per packing unit: 4
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LX0312
- Quality class: PJ
Additional information: "Tootja: DELPHI
KLASA C KOMBI (S202)
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
KLASA C KOMBI (S202)
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Brake System: ATE
- Manufacturer: BOSCH
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without sports package
-
Pidurisüsteem: LUCAS/
TRW -
Kaal (kg): 0,
04 - Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Pikkus (mm): 100
- Piduriliik: Ketaspidur
- Kulumisnäidikute arv [ühe telje kohta]: 1
- Manufacturer: TRW
- Fitting Position: Front Axle
- Pikkus (mm): 120
- Piduriliik: Ketaspidur
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: BOS
- Fitting Position: Rear Axle
- Brake System: ATE
- Quality class: PJ
- Name: Brake pads fitting kit
- Fitting Position: Front Axle
- Brake System: BREMBO
- Manufacturer: PROFIPOWER
- Fitting Position: Front Axle
- Brake System: TRW
- Pikkus 1 [mm]: 97
- Piduriliik: Ketaspidur
- Name: DE LZ0363
- Manufacturer: DELPHI
- Vehicle Equipment: for vehicles with sports package
- Installatsiooni pool: Esisild
- Pidurisüsteem: Brembo
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D4-
2821A
- Fitting Position: Rear Axle
- Pidurisüsteem: ATE
-
Name: Lisakomplekt,
ketaspiduriklotsid - Manufacturer: ATE
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: HCA-
ME- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Brake System: TRW
- Quantity per packing unit: 4
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LX0334
- Quality class: PJ
Additional information: "Tootja: DELPHI
POLO SEDAN, 09.02-
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
POLO SEDAN, 09.02-
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle Right
-
Fabrication Number: HCA-
ME- 001 -
paired article number: HCA-
ME- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Brake System: TRW
- Manufacturer: BOSCH
- Fitting Position: Front Axle
- Brake System: TRW
- Quality class: PJ
- Name: Brake pads fitting kit
- Fitting Position: Rear Axle Left
-
Fabrication Number: HCA-
ME- 000 -
paired article number: HCA-
ME- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Right,
Front Axle, Front Axle Right - Material: Sheet Steel
- Name: CFD 612310
- Manufacturer: DACO
- Fitting Position: Front Axle
- Sensor Type: Hall Sensor
- Number of pins: 2
- Cable Length [mm]: 565
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle Left
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 316
-
paired article number: 131-
07- 106 - Colour: black
-
Article number of recommended accessories: 231-
03- 065 - Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Installatsiooni pool: Tagasild paremal
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 2
- Kaablipikkus (mm): 970
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
wheel speed -
Additional information: Sensor,
wheel speed
- Installatsiooni pool: Tagasild vasakul
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 2
- Kaablipikkus (mm): 1 125
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
wheel speed -
Additional information: Sensor,
wheel speed
- Fitting Position: Front Axle Right
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 316
-
paired article number: 131-
07- 105 - Colour: black
-
Article number of recommended accessories: 231-
03- 065 - Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle
- Pidurisüsteem: Lucas
- Osade arv [-osaline]: 4
-
pakendi pikkus [cm]: 18,
5 -
pakendi laius [cm]: 12,
5 - pakendi kõrgus [cm]: 1
-
Kaal (kg): 0,
038 -
Name: LISAKOMPLEKT,
KETASPIDURIKLOTSID - Manufacturer: TEX
- Anduritüüp: Aktiivne andur
- vajaminev tükihulk: 1
- Kaablipikkus (mm): 970
- Pistikkontaktide arv: 2
- Installatsiooni pool: Tagasild paremal
-
paaris tootenumbrid: 20-
0366 -
Name: Andur,
rattaprete arv - Manufacturer: MAX
- Anduritüüp: Aktiivne andur
- vajaminev tükihulk: 1
- Kaablipikkus (mm): 1 125
- Pistikkontaktide arv: 2
- Installatsiooni pool: Tagasild vasakul
-
paaris tootenumbrid: 20-
0367 -
Name: Andur,
rattaprete arv - Manufacturer: MAX
- Fitting Position: Rear Axle Left
- Inner Diameter [mm]: 100
- Outer Diameter [mm]: 350
-
paired article number: 131-
07- 604 - Colour: black
- Material: Sheet Steel
- Surface: Cathodic Painting
-
Article number of recommended accessories: 231-
04- 016 - Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle Right
- Material: Sheet Steel
-
Surface: Zinc-
coated -
Fabrication Number: HTO-
ME- 014 -
paired article number: HTO-
ME- 013
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Left
- Material: Sheet Steel
-
Surface: Zinc-
coated -
Fabrication Number: HTO-
ME- 013 -
paired article number: HTO-
ME- 014 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Anduritüüp: Aktiivne andur
- vajaminev tükihulk: 2
- Kaablipikkus (mm): 565
- Pistikkontaktide arv: 2
- Installatsiooni pool: Esisild
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
-
Fitting Position: Left,
Front Axle, Front Axle Left - Material: Sheet Steel
- Name: CFD 612309
- Manufacturer: DACO
- Fitting Position: Rear Axle Right
- Sensor Type: Hall Sensor
- Number of pins: 2
-
Cable Length [mm]: 1,
040 - Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Fitting Position: Rear Axle,
Rear Axle Left -
paired article number: GH-
713300H -
Manufacturer: AUTO-
GH
-
paaris tootenumbrid: 19-
3273 - Installatsiooni pool: Tagasild vasakul
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: MAX
-
Lisainfo: 19-
3272 -
Additional information: 19-
3272
-
paaris tootenumbrid: 19-
3272 - Installatsiooni pool: Tagasild paremal
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: MAX
-
Lisainfo: 19-
3273 -
Additional information: 19-
3273
- Installatsiooni pool: Tagasild vasakul
- Värv: must
- Materjal: Raudplekk
-
Pealispind: KTL-
kattega (katoodne sukelduskatmine) -
paaris tootenumbrid: BSP-
4001R - Manufacturer: OPTIMAL ZAWIESZENIE
- Installatsiooni pool: esisild paremal
- Materjal: Raudplekk
- Manufacturer: KAMOKA
- Installatsiooni pool: esisild vasakul
- Materjal: Raudplekk
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle Left
- Material: Sheet Steel
-
Surface: Zinc-
coated -
Fabrication Number: HTO-
ME- 003 -
paired article number: HTO-
ME- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle Right
- Material: Sheet Steel
-
Surface: Zinc-
coated -
Fabrication Number: HTO-
ME- 004 -
paired article number: HTO-
ME- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle Left
- Sensor Type: Hall Sensor
- Number of pins: 2
-
Cable Length [mm]: 1,
190 - Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Installatsiooni pool: Tagasild paremal
- Materjal: Raudplekk
- Läbimõõt 1 (mm): 350
- Läbimõõt 2 (mm): 100
- Manufacturer: KAMOKA
- Installatsiooni pool: Tagasild vasakul
- Materjal: Raudplekk
- Läbimõõt 1 (mm): 350
- Läbimõõt 2 (mm): 100
- Manufacturer: KAMOKA
- Installatsiooni pool: esisild paremal
- Välisläbimõõt [mm]: 316
- Siseläbimõõt [mm]: 50
- Manufacturer: JP GROUP
-
Lisainfo: Splash Panel,
brake disc -
Additional information: Splash Panel,
brake disc
- Installatsiooni pool: esisild vasakul
- Välisläbimõõt [mm]: 316
- Siseläbimõõt [mm]: 50
-
Lisainfo: Splash Panel,
brake disc -
Additional information: Splash Panel,
brake disc
- Fitting Position: Rear Axle Left
- Manufacturer: YSPARTS
- Fitting Position: Rear Axle Right
- Manufacturer: YSPARTS
- Installatsiooni pool: Tagasild vasakul
- OE-numbri jaoks: A2035401317
- Kinnitusaukude hulk: 1
- Manufacturer: MAGNETI MARELLI
- Name: MM MWSS071
- Installatsiooni pool: Tagasild paremal
- Kaablipikkus (mm): 948
- OE-numbri jaoks: A2035401417
- Kinnitusaukude hulk: 1
- Manufacturer: MAGNETI MARELLI
- Name: MM MWSS070
- Fitting Position: Rear Axle Right
- Manufacturer: OYODO
-
Fitting Position: Rear Axle,
Right - Diameter 1 [mm]: 350
- Diameter 2 [mm]: 100
- Material: Sheet Steel
- Name: CFD 612313
- Manufacturer: DACO
-
Fitting Position: Rear Axle,
Left - Diameter 1 [mm]: 350
- Diameter 2 [mm]: 100
- Material: Sheet Steel
- Name: CFD 612314
- Manufacturer: DACO
- Fitting Position: Rear Axle Left
- Manufacturer: OYODO
- Installatsiooni pool: Esisild
- Kaablipikkus (mm): 565
- OE-numbri jaoks: A2035400417
- Pistikkontaktide arv: 2
- Kinnitusaukude hulk: 1
- Manufacturer: MAGNETI MARELLI
- Name: MM MWSS069
- Fitting Position: Rear Axle Right
- Length [mm]: 948
- Manufacturer: DENCKERMANN FILTRY
-
paaris tootenumbrid: 19-
3437 - Installatsiooni pool: esisild vasakul
-
Name: Plekk,
piduriketas - Manufacturer: MAX
- Installatsiooni pool: Tagasild paremal
- Välisläbimõõt [mm]: 350
- Siseläbimõõt [mm]: 100
-
Lisainfo: Splash Panel,
brake disc -
Additional information: Splash Panel,
brake disc
- Installatsiooni pool: Tagasild vasakul
- Välisläbimõõt [mm]: 350
- Siseläbimõõt [mm]: 100
- Manufacturer: JP GROUP
-
Lisainfo: Splash Panel,
brake disc -
Additional information: Splash Panel,
brake disc
-
paaris tootenumbrid: 19-
3436 - Installatsiooni pool: esisild paremal
-
Name: Plekk,
piduriketas - Manufacturer: MAX
- Required quantity: 2
- Fitting Position: Front Axle
- Length [mm]: 565
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle Right
- Guarantee: 3 years guarantee
- paired article number: 57SKV111
- Weight [kg]: 0.44
- Always compare old and new part (in particular OE No.):
- Name: CE 57SKV112
- Manufacturer: ESEN SKV
- Fitting Position: Front Axle Left
- Guarantee: 3 years guarantee
- paired article number: 57SKV112
- Weight [kg]: 0.43
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 57SKV111
- Fitting Position: Front Axle Left
- Manufacturer: YSPARTS
- Fitting Position: Front Axle Right
- Manufacturer: YSPARTS
- Fitting Position: Rear Axle Left
- Guarantee: 3 years guarantee
- paired article number: 57SKV620
- Weight [kg]: 0.49
- Always compare old and new part (in particular OE No.):
- Name: CE 57SKV619
- Manufacturer: ESEN SKV
- Fitting Position: Rear Axle Right
- Guarantee: 3 years guarantee
- paired article number: 57SKV619
- Weight [kg]: 0.49
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 57SKV620
- Installatsiooni pool: Tagasild vasakul
- Materjal: Metall
- paaris tootenumbrid: 8125 23204
- Pealispind: Krundeeritud keemiliselt
-
Läbimõõt 1/Läbimõõt 2 (mm): 350/
100 -
Name: Plekk,
piduriketas - Manufacturer: TRI
- Installatsiooni pool: Tagasild paremal
- Materjal: Metall
- paaris tootenumbrid: 8125 23203
- Pealispind: Krundeeritud keemiliselt
-
Läbimõõt 1/Läbimõõt 2 (mm): 350/
100 -
Name: Plekk,
piduriketas - Manufacturer: TRI
- Installatsiooni pool: Tagasild vasakul
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Nominaalpinge (V): 12
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Installatsiooni pool: esisild paremal
- Materjal: Metall
- paaris tootenumbrid: 8125 23115
- Pealispind: Krundeeritud keemiliselt
-
Name: Plekk,
piduriketas - Manufacturer: TRI
- Installatsiooni pool: esisild vasakul
- Materjal: Metall
- paaris tootenumbrid: 8125 23116
- Pealispind: Krundeeritud keemiliselt
-
Name: Plekk,
piduriketas - Manufacturer: TRI
- Fitting Position: Rear Axle Right
- Inner Diameter [mm]: 100
- Outer Diameter [mm]: 350
-
paired article number: 131-
07- 603 - Colour: black
- Material: Sheet Steel
- Surface: Cathodic Painting
-
Article number of recommended accessories: 231-
04- 016 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- paaris tootenumbrid: 171538
- Installatsiooni pool: esisild vasakul
-
Kaal (kg): 0,
383 - Hooldusinfot jälgida:
-
Name: Plekk,
piduriketas - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- OE-numbri jaoks: 203 423 0320
- Installatsiooni pool: Tagasild vasakul
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: TRU
- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Kaablipikkus (mm): 1 115
- Installatsiooni pool: Tagasild vasakul
- Manufacturer: AUTOFREN SEINSA
- Name: SE DS0110
- OE-numbri jaoks: 203 420 0244
- Installatsiooni pool: esisild paremal
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: TRU
- OE-numbri jaoks: 203 423 0420
- Installatsiooni pool: Tagasild paremal
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: TRU
-
Fitting Position: Rear Axle,
Rear Axle Left -
paired article number: GH-
483386H -
Manufacturer: AUTO-
GH
- Anduritüüp: Aktiivne andur
- Kaablipikkus (mm): 970
- Pistikkontaktide arv: 2
- Installatsiooni pool: Tagasild paremal
- paaris tootenumbrid: 014 899 0056
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Anduritüüp: Aktiivne andur
- Kaablipikkus (mm): 1 125
- Pistikkontaktide arv: 2
- Installatsiooni pool: Tagasild vasakul
- paaris tootenumbrid: 014 899 0057
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Anduritüüp: Aktiivne andur
- Kaablipikkus (mm): 580
- Pistikkontaktide arv: 2
-
Installatsiooni pool: esisild paremal,
esisild vasakul - Manufacturer: AUTOFREN SEINSA
- Name: SE DS0095
- OE-numbri jaoks: 203 420 0144
- Installatsiooni pool: esisild vasakul
-
Name: PLEKK,
PIDURIKETAS - Manufacturer: TRU
- Installatsiooni pool: Tagasild paremal
- Materjal: Raudplekk
- paaris tootenumbrid: 409 524
- Manufacturer: TOPRAN HANS PRIES
Pealispind: Must, värvitud, KTL-kattega (katoodne sukelduskatmine) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Length [mm]: 990
- Number of pins: 2
- Plug Type: Male
- Connector Shape: oval
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- Weight [kg]: 0.09
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 06SKV134
- Manufacturer: ESEN SKV
- Anduritüüp: Aktiivne andur
- Kaablipikkus (mm): 590
- Pistikkontaktide arv: 2
- Installatsiooni pool: Esisild
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Fitting Position: Rear Axle
-
Length [mm]: 1,
130 - Number of pins: 2
- Plug Type: Male
- Connector Shape: oval
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- Weight [kg]: 0.08
- Colour: black
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 06SKV061
- paaris tootenumbrid: 171537
- Installatsiooni pool: esisild paremal
-
Kaal (kg): 0,
383 - Hooldusinfot jälgida:
-
Name: Plekk,
piduriketas - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Left
- Läbimõõt 1 (mm): 350
- Läbimõõt 2 (mm): 100
- Materjal: Raudplekk
- paaris tootenumbrid: 11266
-
Kaal (kg): 0,
55 - Manufacturer: A.B.S.
- Fitting Position: Rear Axle Right
- Läbimõõt 1 (mm): 350
- Läbimõõt 2 (mm): 100
- Materjal: Raudplekk
- paaris tootenumbrid: 11265
-
Kaal (kg): 0,
55 - Manufacturer: A.B.S.
- Installatsiooni pool: Tagasild vasakul
- Materjal: Raudplekk
- paaris tootenumbrid: 409 525
- Manufacturer: TOPRAN HANS PRIES
Pealispind: Must, värvitud, KTL-kattega (katoodne sukelduskatmine) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- paaris tootenumbrid: 171534
- Installatsiooni pool: Tagasild vasakul
-
Kaal (kg): 0,
43 - Hooldusinfot jälgida:
-
Name: Plekk,
piduriketas - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paaris tootenumbrid: 171533
- Installatsiooni pool: Tagasild paremal
-
Kaal (kg): 0,
43 - Hooldusinfot jälgida:
-
Name: Plekk,
piduriketas - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paaris tootenumbrid: 233317
- Installatsiooni pool: esisild paremal
-
Netokaal [kg]: 0,
38 -
Name: PLEKK,
PIDURIKETAS - Manufacturer: NK
- paaris tootenumbrid: 233318
- Installatsiooni pool: esisild vasakul
-
Netokaal [kg]: 0,
38 -
Name: PLEKK,
PIDURIKETAS - Manufacturer: NK
- Installatsiooni pool: Tagasild vasakul
- Materjal: Raudplekk
- Pealispind: tsingitud
-
paaris tootenumbrid: V30-
2560 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle Left
- pikkus üle kõige (mm): 1 180
- Pikkus (mm): 31
- Anduritüüp: Aktiivne andur
- Pistiku värv: must
- Kaablipikkus (mm): 1 110
- paaris tootenumbrid: 30239
-
Kaal (kg): 0,
06 - Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Length [mm]: 600
- Number of pins: 2
- Plug Type: Male
- Connector Shape: oval
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- Weight [kg]: 0.04
- Colour: black
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Installatsiooni pool: Tagasild paremal
- Materjal: Raudplekk
-
paaris tootenumbrid: V30-
2559 - Pealispind: tsingitud
- Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Right
- Materjal: Raudplekk
- paaris tootenumbrid: 11318
-
Kaal (kg): 0,
39 - Manufacturer: A.B.S.
- Fitting Position: Front Axle Left
- Materjal: Raudplekk
- paaris tootenumbrid: 11319
-
Kaal (kg): 0,
39 - Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Anduritüüp: Aktiivne andur
- kasutatud klemmide arv: 2
- Kaablipikkus (mm): 650
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Quality class: PJ
- Fitting Position: Rear Axle Right
- Required quantity: 1
- Kaablipikkus (mm): 1 000
-
Installatsiooni sügavus (mm): 31,
2 - Pistikkontaktide arv: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Fitting Position: Rear Axle Left
- Required quantity: 1
- Kaablipikkus (mm): 1 155
-
Installatsiooni sügavus (mm): 31,
2 - Pistikkontaktide arv: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Kaablipikkus (mm): 1 000
- Anduritüüp: Aktiivne andur
- Pistikkontaktide arv: 2
- Installatsiooni pool: Tagasild paremal
- Manufacturer: FAE
- Fitting Position: Rear Axle Right
- pikkus üle kõige (mm): 1 040
- Pikkus (mm): 31
- Anduritüüp: Aktiivne andur
- Pistiku värv: must
- Kaablipikkus (mm): 970
- paaris tootenumbrid: 30238
-
Kaal (kg): 0,
06 - Manufacturer: A.B.S.
- Required quantity: 1
- Fitting Position: Rear Axle Right
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
- Pikkus (mm): 648
- Ühenduste arv: 2
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Kaal (kg): 0,
035 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 2
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
- Required quantity: 1
- Fitting Position: Rear Axle Left
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
- Fitting Position: Rear Axle Left
- Anduritüüp: Aktiivne andur
- kasutatud klemmide arv: 2
- Kaablipikkus (mm): 1 181
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Fitting Position: Front Axle
- pikkus üle kõige (mm): 690
- Pikkus (mm): 31
- Anduritüüp: Aktiivne andur
- Pistiku värv: must
- Kaablipikkus (mm): 610
- paaris tootenumbrid: 30193
-
Kaal (kg): 0,
09 - Manufacturer: A.B.S.
-
Fitting Position: Left,
Rear Axle, Front Axle - Kaablipikkus (mm): 1 154
-
Manufacturer: SNR /
NTN- SNR/
-
Fitting Position: Right,
Rear Axle, Front Axle - Kaablipikkus (mm): 1 000
-
Manufacturer: SNR /
NTN- SNR/
- Fitting Position: Rear Axle Right
- Anduritüüp: Aktiivne andur
- kasutatud klemmide arv: 2
- Kaablipikkus (mm): 1 030
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE SS20224
- Fitting Position: Front Axle
- Required quantity: 2
- Kaablipikkus (mm): 580
- Installatsiooni sügavus (mm): 31
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Pistikkontaktide arv: 2
- Anduritüüp: Aktiivne andur
- Kaablipikkus (mm): 960
- Installatsiooni pool: Tagasild paremal
- Manufacturer: AUTOFREN SEINSA
- Name: SE DS0111
- Fitting Position: Rear Axle Right
- paired article number: 6115005
- Material: Sheet Steel
- Surface: Cathodic Painting
- Manufacturer: METZGER
- Fitting Position: Rear Axle Left
- paired article number: 6115006
- Material: Sheet Steel
- Surface: Cathodic Painting
- Manufacturer: METZGER
- Fitting Position: Front Axle
- Required quantity: 2
- Pikkus (mm): 565
- MAPP-code olemas:
- Manufacturer: ATE
- Fitting Position: Rear Axle Left
- Läbimõõt 1 (mm): 351
-
Läbimõõt 2 (mm): 100,
6 -
Pealispind: tsingitud,
värvimisviis - paaris tootenumbrid: J3350813
- SVHC: SVHS aineid ei esine
-
Name: Plekk,
piduriketas - Manufacturer: HBJ
- Fitting Position: Rear Axle Right
- Läbimõõt 1 (mm): 351
-
Läbimõõt 2 (mm): 100,
6 -
Pealispind: tsingitud,
värvimisviis - paaris tootenumbrid: J3340813
- SVHC: SVHS aineid ei esine
-
Name: Plekk,
piduriketas - Manufacturer: HBJ
- Engine Code: M 111.955
- Installatsiooni pool: Esisild
- Garantii: 5 aastat garantii
- Manufacturer: HUCO
-
Fitting Position: Left,
Right - Required quantity: 2
- Pistikkontaktide arv: 2
- Pinge [V]: 12
- Tootja piirang: Teves
- Kaablipikkus (mm): 565
- Anduritüüp: Hallsensor
- Installatsiooni pool: Esisild
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Front Axle
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: koos kaabliga
- pikkus üle kõige (mm): 650
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
- Manufacturer: BOSCH
- Fitting Position: Rear Axle Left
- Anduritüüp: Aktiivne andur
- Pikkus (mm): 1 190
- paaris tootenumbrid: GBS1909
- Manufacturer: TRW
- Fitting Position: Rear Axle Right
- Anduritüüp: Aktiivne andur
- Pikkus (mm): 1 040
- paaris tootenumbrid: GBS1910
- Manufacturer: TRW
- Fitting Position: Rear Axle Right
- Pikkus (mm): 948
- MAPP-code olemas:
- Manufacturer: ATE
- Fitting Position: Rear Axle Left
- Pikkus (mm): 1 102
- MAPP-code olemas:
- Manufacturer: ATE
- Fitting Position: Rear Axle Right
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: koos kaabliga
- pikkus üle kõige (mm): 1 040
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
- Manufacturer: BOSCH UK£ADY HAMULCOWE
- Fitting Position: Rear Axle Left
- Anduritüüp: Aktiivne andur
- Piirangutega toode/piirangu info 2: koos kaabliga
- pikkus üle kõige (mm): 1 190
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 150
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks