• Construction Year to: 12.2009
• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: Hallsensor
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Installatsiooni pool: esisild mõlemapoolselt
• Siseläbimõõt [mm]: 46,5
• Välisläbimõõt [mm]: 68,1
• Jämedus/Tugevus (mm): 9,5
• Piirangutega toode/piirangu info 2: magnetiline
• Hammastehulk: 96
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-ME-002
• Manufacturer: NTY

• Fitting Position: Rear Axle Right
• Fabrication Number: HCA-ME-001
• paired article number: HCA-ME-000
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-ME-000
• paired article number: HCA-ME-001

• Construction Year to: 12.2009
• Installatsiooni pool: Tagasild paremal
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 040
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Installatsiooni pool: Tagasild paremal
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 970
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Installatsiooni pool: Tagasild vasakul
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 125
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Construction Year to: 12.2009
• Installatsiooni pool: Tagasild vasakul
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 190
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Anduritüüp: Aktiivne andur
• vajaminev tükihulk: 2
• Kaablipikkus (mm): 565
• Pistikkontaktide arv: 2
• Installatsiooni pool: Esisild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Anduritüüp: Aktiivne andur
• vajaminev tükihulk: 1
• Kaablipikkus (mm): 970
• Pistikkontaktide arv: 2
• Installatsiooni pool: Tagasild paremal
• paaris tootenumbrid: 20-0366
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Anduritüüp: Aktiivne andur
• vajaminev tükihulk: 1
• Kaablipikkus (mm): 1 125
• Pistikkontaktide arv: 2
• Installatsiooni pool: Tagasild vasakul
• paaris tootenumbrid: 20-0367
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Installatsiooni pool: esisild vasakul, esisild paremal
• Tootja piirang: ABS-Ring magnetisch
• Välisläbimõõt [mm]: 68
• Siseläbimõõt [mm]: 47
• Laius (mm): 9,5
• Manufacturer: METZGER

• Installatsiooni pool: Tagasild paremal
• Kaablipikkus (mm): 948
• OE-numbri jaoks: A2035401417
• Kinnitusaukude hulk: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS070

• Installatsiooni pool: Tagasild vasakul
• OE-numbri jaoks: A2035401317
• Kinnitusaukude hulk: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS071

• Fitting Position: Rear Axle Right
• Construction Year to: 12.2009
• Pikkus (mm): 948
• Manufacturer: DENCKERMANN FILTRY

• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 565
• OE-numbri jaoks: A2035400417
• Pistikkontaktide arv: 2
• Kinnitusaukude hulk: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS069

• Required quantity: 2
• Fitting Position: Front Axle
• Construction Year to: 12.2009
• Pikkus (mm): 565
• Manufacturer: DENCKERMANN FILTRY

• Anduritüüp: Aktiivne andur
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 115
• Installatsiooni pool: Tagasild vasakul
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0110

• Anduritüüp: Aktiivne andur
• Kaablipikkus (mm): 580
• Pistikkontaktide arv: 2
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0095

• Fitting Position: Left Rear
• Installatsiooni pool: Tagasild vasakul
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Nominaalpinge (V): 12
• Kaal (kg): 0,058
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Left, Right
• Pistiku kesta tüüp: Pistikuhülsi korpus
• juhtmeisolatsiooni materjal: Silikoon
• Kaablipikkus (mm): 500
• Tootja piirang: BMW, Mercedes-Benz
• Asetuslaius (mm): 2,8
• Pistikkontaktide arv: 2
• Kaabli ristlõige [mm²]: 1
• Kokkupuutepind: hõbetatud
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +125
• SVHC: SVHS aineid ei esine
• Manufacturer: HBE

Name: Kaabli paranduskomplekt, v„ntvolli positsiooniandur

• Fitting Position: Front Axle
• Siseläbimõõt [mm]: 46,5
• Laius (mm): 9,5
• Välisläbimõõt [mm]: 68,1
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Pistikkontaktide arv: 96
• Name: ANDUR,ABS
• Manufacturer: TRI

• Construction Year from: 09.2006
• Construction Year to: 12.2009
• Fitting Position: Rear Axle
• Length [mm]: 990
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV134
• Manufacturer: ESEN SKV

• Construction Year to: 12.2009
• Fitting Position: Rear Axle
• Length [mm]: 1,130
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.08
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV061

• Construction Year to: 12.2009
• Fitting Position: Front Axle
• Length [mm]: 600
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.04
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV151
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Left
• pikkus üle kõige (mm): 1 180
• Pikkus (mm): 31
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 1 110
• paaris tootenumbrid: 30239
• Kaal (kg): 0,06
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• pikkus üle kõige (mm): 1 040
• Pikkus (mm): 31
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 970
• paaris tootenumbrid: 30238
• Kaal (kg): 0,06
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 650
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Front Axle
• pikkus üle kõige (mm): 690
• Pikkus (mm): 31
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 610
• paaris tootenumbrid: 30193
• Kaal (kg): 0,09
• Manufacturer: A.B.S.

• Construction Year to: 12.2009
• Installatsiooni pool: Pidurivõimendi
• Pidurisüsteem: ATE
• Name: Pedaali asendi andur, piduripedaal
• Manufacturer: ATE

• Pikkus (mm): 648
• Ühenduste arv: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,035
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: Rear Axle Right
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• Required quantity: 2
• Fitting Position: Front Axle
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• Fitting Position: Rear Axle Left
• Required quantity: 1
• Kaablipikkus (mm): 1 155
• Installatsiooni sügavus (mm): 31,2
• Pistikkontaktide arv: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle Right
• Required quantity: 1
• Kaablipikkus (mm): 1 000
• Installatsiooni sügavus (mm): 31,2
• Pistikkontaktide arv: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Anduritüüp: Aktiivne andur
• Kaablipikkus (mm): 1 125
• Pistikkontaktide arv: 2
• Installatsiooni pool: Tagasild vasakul
• paaris tootenumbrid: 014 899 0057
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Anduritüüp: Aktiivne andur
• Kaablipikkus (mm): 970
• Pistikkontaktide arv: 2
• Installatsiooni pool: Tagasild paremal
• paaris tootenumbrid: 014 899 0056
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Required quantity: 1
• Fitting Position: Rear Axle Left
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• Fitting Position: Rear Axle Left
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 181
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Pistikkontaktide arv: 2
• Anduritüüp: Aktiivne andur
• Kaablipikkus (mm): 960
• Installatsiooni pool: Tagasild paremal
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0111

• Fitting Position: Rear Axle Right
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 030
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Right, Rear Axle, Front Axle
• Kaablipikkus (mm): 1 000
• Manufacturer: SNR /NTN-SNR/

• Fitting Position: Left, Rear Axle, Front Axle
• Kaablipikkus (mm): 1 154
• Manufacturer: SNR

• paaris tootenumbrid: 10 93 0033
• Ühenduste arv: 2
• pikkus väljast (mm): 1 192
• Installatsiooni pool: Tagasild vasakul
• Kaal (kg): 0,058
• Name: SW 10 93 0032
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• Kaablipikkus (mm): 580
• Installatsiooni sügavus (mm): 31
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Engine Code: M 273.967
• Installatsiooni pool: Esisild
• Garantii: 5 aastat garantii
• Manufacturer: HUCO

• Anduritüüp: Aktiivne andur
• Kaablipikkus (mm): 590
• Pistikkontaktide arv: 2
• Installatsiooni pool: Esisild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Construction Year to: 12.2009
• Fitting Position: Front Axle
• Anduritüüp: Aktiivne andur
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 650
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Manufacturer: BOSCH

• Construction Year to: 12.2009
• Required quantity: 2
• Fitting Position: Front Axle
• Pikkus (mm): 565
• MAPP-code olemas:
• Manufacturer: ATE

• Fitting Position: Rear Axle Right
• Anduritüüp: Aktiivne andur
• Pikkus (mm): 1 040
• paaris tootenumbrid: GBS1910
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Fitting Position: Rear Axle Left
• Anduritüüp: Aktiivne andur
• Pikkus (mm): 1 190
• paaris tootenumbrid: GBS1909
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Construction Year to: 12.2009
• Fitting Position: Rear Axle Left
• Pikkus (mm): 1 102
• MAPP-code olemas:
• Manufacturer: ATE

• Required quantity: 2
• Pinge [V]: 12
• Tootja piirang: Teves
• Kaablipikkus (mm): 565
• Anduritüüp: Hallsensor
• Installatsiooni pool: Esisild
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2009
• Fitting Position: Rear Axle Left
• Anduritüüp: Aktiivne andur
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 1 190
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Manufacturer: BOSCH

• Construction Year to: 12.2009
• Installatsiooni pool: Pidurivõimendi
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 3
• OE-numbri jaoks: 163 540 12 17
• Pidurisüsteem: ATE
• Kaal (kg): 0,064
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.