• Length [mm]: 18
• Outer Diameter [mm]: 30
• External Thread Size: M24 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 5.8
• Spanner Size: 12
• Bolt Head-/Nut Design: Hexagon Socket
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 14
• Weight [kg]: 0.049
• Observe dimensions:
• Lisainfo: 10 90 5410 SWA
• Additional information: 10 90 5410 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 17
• Outer Diameter [mm]: 32
• External Thread Size: M26 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 6.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Hexagon Socket
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 14
• Weight [kg]: 0.064
• Supplementary Article/Info 2: without seal ring
• Manufacturer: SWAG
• Lisainfo: 10 90 3013 SWA
• Additional information: 10 90 3013 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 25
• Material: Copper
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Outer Diameter [mm]: 20
• Weight [kg]: 0.007
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 100
• Outer Diameter [mm]: 20
• Inner Diameter [mm]: 14
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• DIN/ISO: 7603
• Material: Copper
• Weight [kg]: 0.003
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 25
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• Thickness [mm]: 2.5
• Material: Copper
• Shape: C Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 036.400, 505.550, 505.540
• Manufacturer: ELRING

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• DIN/ISO: 7603
• Material: Copper
• Weight [kg]: 0.003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 4
• Length [mm]: 12
• Weight [kg]: 0.02
• Thread Size: M12 x 1,5
• Weight [g]: 20
• Manufacturer: METALCAUCHO

• Length [mm]: 21
• Outer Diameter [mm]: 17
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• DIN/ISO: 910
• Material: Steel
• Surface: Oiled
• Screw length below head [mm]: 12
• Weight [kg]: 0.02
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 21
• Outer Diameter [mm]: 17
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• DIN/ISO: 910
• Material: Steel
• Surface: Oiled
• Screw length below head [mm]: 12
• Weight [kg]: 0.02
• Supplementary Article/Info 2: without seal ring
• Manufacturer: SWAG
• Lisainfo: 99 90 5961 SWA
• Additional information: 99 90 5961 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 33
• Thread Size: M14 x 1,50
• Manufacturer: 3RG

• Thread Size: M26x1,5
• Length [mm]: 14
• Additionally required articles (article numbers): 224.150.100
• Manufacturer: FA1

• Length [mm]: 33
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 20
• Quality/ Grade: 8.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Screw length below head [mm]: 24
• Weight [kg]: 0.04
• Supplementary Article/Info 2: without seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 10
• for OE number: 111 997 0330
• Length [mm]: 33
• Thread Size: M14 x 1,5
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Length [mm]: 33
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 20
• Quality/ Grade: 8.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Screw length below head [mm]: 24
• Weight [kg]: 0.037
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 18
• Outer Diameter [mm]: 30
• External Thread Size: M24 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 5.8
• Spanner Size: 12
• Bolt Head-/Nut Design: Hexagon Socket
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 14
• Weight [kg]: 0.049
• Observe dimensions:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 111 997 0330 cpl.1
• Thread Size: M14 x 1,5
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Thread Size: M26x1,5
• Length [mm]: 14
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FA1 FISCHER

• Length [mm]: 21
• Outer Diameter [mm]: 17
• External Thread Size: M12 x 1,5
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• DIN/ISO: 910
• Material: Steel
• Surface: Oiled
• Screw length below head [mm]: 12
• for OE number: 002 997 34 30
• Supplementary Article/Info 2: without seal ring
• Manufacturer: ENERGY

• Length [mm]: 33
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 20
• Quality/ Grade: 8.8
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Screw length below head [mm]: 24
• Weight [kg]: 0.037
• Supplementary Article/Info 2: without seal ring
• for OE number: 111 997 03 30
• Manufacturer: ENERGY-NARZÊDZIA WARSZTATOWE

• Quantity per packing unit: 5
• Fitting Position: engine sided
• Thread Length [mm]: 24
• Thread Pitch [mm]: 1.5
• Required quantity: 1
• Material: Steel
• Surface: Zinc-coated
• Thread Size: M14 x 1,5
• Supplementary Article/Info 2: with seal ring
• Length [mm]: 33
• External Thread [mm]: M14 x 1,5
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Weight [kg]: 0.048
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 14
• Bolt Head-/Nut Design: Hexagon Socket
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FAST

• Thread Size: M14 x 1,5
• Screw length below head [mm]: 24
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 13
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 33
• Material: Steel
• Spanner Size: 13
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FAST

• Thread Size: M24x1,5
• Length [mm]: 13
• Bolt Head-/Nut Design: Hexagon Socket
• Spanner Size: 14 mm
• Additionally required articles (article numbers): 340.980.100

• Thread Size: M24x1,5
• Length [mm]: 13
• Spanner Size: 14 mm
• Bolt Head-/Nut Design: Hexagon Socket
• Supplementary Article/Info 2: with seal ring

• Length [mm]: 17
• Thread Size: M 26 x 1,50 x 14
• Spanner Size: 14
• Packing Type: Blister Pack
• Name: COU 220153S
• Manufacturer: CORTECO

• for OE number: A 130 997 00 32
• Material: Steel
• Thread Size: M26x1,5
• Length [mm]: 17
• Thread Length [mm]: 12
• Bolt Head-/Nut Design: Hexagon Socket
• Spanner Size: 14
• Seal Material: Copper
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• Thickness [mm]: 2.5
• Packing Type: Bag
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

• Length [mm]: 17
• Outer Diameter [mm]: 32
• External Thread Size: M26 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 6.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Hexagon Socket
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 14
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 10
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• Thickness [mm]: 2.5
• Material: Copper
• Shape: C Shape
• Alternatively:

• Length [mm]: 17
• Outer Diameter [mm]: 32
• External Thread Size: M26 x 1,5
• Thread Length [mm]: 12
• Quality/ Grade: 6.8
• Spanner Size: 15
• Bolt Head-/Nut Design: Hexagon Socket
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 14
• Weight [kg]: 0.064
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 100
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 32
• Thickness [mm]: 2.5
• Material: Copper
• Shape: C Shape