• Transmission Type: 7-Speed Automatic Transmission
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 17
• DIN/ISO: 7603
• Material: Copper
• Shape: A Shape
• Weight [kg]: 0.001
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: FEB
• Lisainfo: 04054 FEBI
• Additional information: 04054 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 25
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 16
• Thickness [mm]: 1.5
• Material: Copper
• Shape: A Shape
• Alternative Repair Kit: 017.655, 505.540
• Manufacturer: ELRING

• Quantity per packing unit: 25
• Material: Copper
• Inner Diameter [mm]: 12.5
• Thickness [mm]: 1.5
• Outer Diameter [mm]: 17
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 2
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.001
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 100
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 1,5
• Materjal: Vask
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per packing unit: 4
• Pikkus (mm): 12
• Kaal (kg): 0,02
• Keermemõõt: M12 x 1,5
• Kaal (g): 20
• Manufacturer: METALCAUCHO

• Pikkus (mm): 21
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 12
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Pealispind: õlitatud
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 21
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• DIN/ISO: 910
• Materjal: Metall
• Pealispind: õlitatud
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M12x1,5
• Pikkus (mm): 12
• lisaks vajatav toode (tootekood): 310.980.100, 397.980.100
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FIS

• Pikkus (mm): 33
• Keermemõõt: M14 x 1,50
• Manufacturer: 3RG

• Outer Diameter [mm]: 17
• Inner Diameter [mm]: 12.3
• Thickness [mm]: 1.5
• Material: Aluminium
• Shape: round
• Packing Type: Blister Pack
• Manufacturer: CORTECO

• Keermemõõt: M12
• Pikkus (mm): 21
• Manufacturer: BGA

• Pikkus (mm): 33
• Välisläbimõõt [mm]: 19
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 20
• Kvaliteet/klass: 8.8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Kruvipikkus kruvipea all [mm]: 24
• Kaal (kg): 0,037
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 33
• Välisläbimõõt [mm]: 19
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 20
• Kvaliteet/klass: 8.8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Kruvipikkus kruvipea all [mm]: 24
• Kaal (kg): 0,04
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Manufacturer: BLUE PRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M12x1,5
• Pikkus (mm): 12
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• valikuliselt:
• Manufacturer: FISCHER

• Keermemõõt: M12x1,5x12
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 13 mm
• alternatiivne remondikomplekt: 878.020
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Name: Sulgurkruvi, olivann
• Manufacturer: ELR

• Transmission Type: 7-Speed Automatic Transmission
• Pikkus (mm): 15
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 9
• Võtmekaugus: 6
• Kruvipea-/Mutriprofiil: sisekuuskant
• DIN/ISO: 908
• Materjal: Metall
• Pealispind: Tsink-lamell-kattega
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,011
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Name: SULGURKRUVI
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 10
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 16
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper
• Alternatively:

• Pikkus (mm): 33
• Välisläbimõõt [mm]: 18,85, 19
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 20
• Kvaliteet/klass: 8.8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Kruvipikkus kruvipea all [mm]: 24
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 21
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• DIN/ISO: 910
• Materjal: Metall
• Pealispind: õlitatud
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Manufacturer: ENERGY

• Pikkus (mm): 15
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 9
• Võtmekaugus: 6
• Kruvipea-/Mutriprofiil: sisekuuskant
• DIN/ISO: 908
• Materjal: Metall
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 000908 012009 S2
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB
• Additional information: FE46409
• Lisainfo: FE46409

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M12 x 1,5
• Kruvipikkus kruvipea all [mm]: 12
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pikkus (mm): 33
• Välisläbimõõt [mm]: 19
• Väliskeerme mõõde: M14 x 1,5
• Keermepikkus (mm): 20
• Kvaliteet/klass: 8.8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Materjal: Metall
• Kruvipikkus kruvipea all [mm]: 24
• Kaal (kg): 0,037
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Manufacturer: ENERGY-NARZÊDZIA WARSZTATOWE

• Keermemõõt: M12x1,5x12
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: ELRING

• Keermemõõt: M14 x 1,5
• Kruvipikkus kruvipea all [mm]: 24
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Materjal: Metall, Alumiinium
• Keermemõõt: M12x1,75
• Pikkus (mm): 21
• Kruvipikkus kruvipea all [mm]: 12
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 13
• Piirangutega toode/piirangu info: koos tihenditega
• Materjal tihend: Vask
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 17
• Jämedus/Tugevus (mm): 1,5
• Konteineri tüüp: Kott
• Manufacturer: METZGER

• Pikkus (mm): 33
• Materjal: Metall
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Manufacturer: FAST

• Quantity per packing unit: 5
• Installatsiooni pool: mootoripoolne
• Keermepikkus (mm): 24
• Keerme samm (mm): 1,5
• vajaminev tükihulk: 1
• Materjal: Metall
• Pealispind: tsingitud
• Keermemõõt: M14 x 1,5
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pikkus (mm): 33
• Väliskeere [mm]: M14 x 1,5
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Keermemõõt: M 12 x 1,50 x 12
• Pikkus (mm): 21
• Konteineri tüüp: Blisterpack
• Võtmekaugus: 13
• Manufacturer: CORTECO
• Name: COU 220118S

• Käigukasti liik: automaatkast 6 käiku
• Materjal: Metall
• Keermemõõt: M8x1,0
• Pikkus (mm): 10
• Kruvipikkus kruvipea all [mm]: 7,5
• Kruvipea-/Mutriprofiil: sise-Torx
• Võtmekaugus: 4
• Materjal tihend: Vask
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: METZGER

• Pikkus (mm): 15
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 9
• Võtmekaugus: 6
• Kruvipea-/Mutriprofiil: sisekuuskant
• DIN/ISO: 908
• Materjal: Metall
• Pealispind: tinutatud
• Kruvipikkus kruvipea all [mm]: 13
• Kaal (kg): 0,011
• OE-numbri jaoks: 000908 012009 S1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SULGURKRUVI
• Manufacturer: FEB
• Lisainfo: 46398 FEBI
• Additional information: 46398 FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 15
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 9
• Võtmekaugus: 6
• Kruvipea-/Mutriprofiil: sisekuuskant
• DIN/ISO: 908
• Materjal: Metall
• Pealispind: tinutatud
• Kruvipikkus kruvipea all [mm]: 13
• OE-numbri jaoks: 000908 012009 S1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 10 94 6398
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 100
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 16
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper
• Manufacturer: FISCHER