• Construction Year from: 04.2012
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Transmission Type: 7-Speed Automatic Transmission
• Filter type: Filter Insert
• Lisainfo: Hydraulic Filter, automatic transmission
• Additional information: Hydraulic Filter, automatic transmission

• Quantity per packing unit: 10
• Transmission Type: 7-Speed Automatic Transmission
• Material: Plastic
• Manufacturer: TOPRAN HANS PRIES

Transmission ID: 722.901, 722.902, 722.960-967,996,997, 722.998,999, 722.903, 722.904, 722.908, 722.909, 722.950 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission ID: 722.901 - 722.999
• Material: Plastic
• Name: Voolik,kastioliradiaator
• Manufacturer: HAN

Transmission Type: 7-Speed Automatic Transmission, for automatic transmission General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Transmission ID: 722.600 - 722.699
• Supplementary Article/Supplementary Info: without gasket/seal
• Filter type: Screen Filter, Suction Filter
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Automatic Transmission
• Transmission ID: 722.600 - 722.699
• Supplementary Article/Supplementary Info: with gaskets/seals
• Housing material: Plastic, GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: 5-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Width [mm]: 112
• Height [mm]: 46
• Transmission Code: 5G TRONIC
• Manufacturer: KAMOKA FILTRY

• Transmission Type: 5-Speed Automatic Transmission
• Length [mm]: 200
• Width [mm]: 120
• Height [mm]: 45
• Transmission Code: 722,6
• See accessories list for additionally required parts:
• Weight [kg]: 0.263
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 4
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Transmission ID: 722.600 - 722.699
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with seal
• for components see parts list:
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: Filter Insert
• Length [mm]: 186.9
• Width [mm]: 112
• Height [mm]: 50.4
• Inner Diameter 2 [mm]: 29
• Transmission Code: 722.6, W5A 330, W5A 380, W5A 580, W5A 900
• Supplementary Article/Supplementary Info: with seal
• Gasket Design: Fibre Composite
• Recommended change interval [km]: 50,000
• Packaging length [cm]: 17.9
• Net Weight [g]: 230
• Packaging height [cm]: 30.35
• Packaging width [cm]: 5.75
• Name: KN HX81D
• Manufacturer: KNECHT

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission

• Transmission Code: 722.683-722.686
• Filter type: Suction Filter
• Height [mm]: 18
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Suction Filter
• Weight [kg]: 0.34
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Transmission Code: 722.683/722.686
• Transmission Type: Automatic Transmission
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Transmission Code: 722.600-699
• Transmission Type: 5-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: 7-Speed Automatic Transmission
• Transmission ID: 722.902, 722.908
• Filter type: Screen Filter, Suction Filter
• Supplementary Article/Supplementary Info: without gasket/seal
• Housing Type: Metal Housing
• Observe system fill quantity:
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 18
• Supplementary Article/Info 2: with oil sump gasket
• SVHC: No SVHC present!
• Manufacturer: METALCAUCHO

• Filter type: Suction Filter
• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: W5A 300-580, 722.6.., DGJ/DGU
• Manufacturer: ELRING

• Transmission Code: 722.683-722.686
• Manufacturer: HENGST FILTER

Transmission Type: Automatic Transmission, Manual-/optional automatic transmission

• Transmission Code: 722.683-722.686
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with oil sump gasket
• Height [mm]: 18
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN
• Lisainfo: H 182 KIT MAN
• Additional information: H 182 KIT MAN

• Transmission Type: Automatic Transmission
• Transmission ID: 722.600 - 722.699
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter, with seal ring, with plug connector
• Supplementary Article/Supplementary Info: with gaskets/seals
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: 7-Speed Automatic Transmission
• Filter type: Filter Insert
• See accessories list for additionally required parts:
• Fabrication Number: FSF-ME-004
• Manufacturer: NTY
• Name: NTY FSF-ME-004

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Transmission Type: 5-Speed Automatic Transmission
• Transmission Code: W5A 300-580, 722.6.., DGJ/DGU
• Supplementary Article/Info 2: with oil sump gasket
• Manufacturer: ELRING

• Transmission Type: 7-Speed Automatic Transmission
• Transmission ID: 722.902, 722.908
• Filter type: Screen Filter
• Supplementary Article/Info 2: with filter
• Supplementary Article/Supplementary Info: with seal
• for components see parts list:
• Observe system fill quantity:
• Name: HšDRAULIKAFILTRIKOMPLEKT,AUTOMAATKŽIGUKAST
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 04.2012
• Construction Year to: 05.2016
• Transmission Code: 722.901-722.999, 7G-Tronic
• Filter type: Suction Filter
• Length [mm]: 267
• Inner Diameter [mm]: 21
• Width [mm]: 174
• Height [mm]: 18
• Manufacturer: DENCKERMANN FILTRY

• Transmission Code: 722.683/722.686
• Transmission Type: Automatic Transmission
• Filter type: Screen Filter
• Manufacturer: JAPKO

• Vehicle Equipment: for vehicles with automatic transmission
• Transmission Code: 7G-Tronic
• Construction Year from: 04.2012
• Transmission Type: Manual-/optional automatic transmission
• Manufacturer: HENGST FILTER
• Lisainfo: EG841H D449
• Additional information: EG841H D449

• Construction Year from: 04.2012
• Construction Year to: 05.2016
• Transmission Code: 722.901-722.999, 7G-Tronic
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Length [mm]: 267
• Width [mm]: 174
• Height [mm]: 18
• Inner Diameter [mm]: 21
• SVHC: No SVHC present!
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MAN

• Recommended change interval [km]: 50,000
• Recommended change interval [years]: 3
• Transmission Type: 5-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Transmission Code: 722,6
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with plug
• Weight [kg]: 0.473
• Manufacturer: VAICO
• Lisainfo: V30-7313 VAI
• Additional information: V30-7313 VAI

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Transmission Code: 722.9 ECO
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission ID: 722.908
• Production date from: 21.06.2010
• for PR number: A89
• Transmission Code: 722,9, 7G-Tronic Plus
• Transmission Type: 7-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Weight [kg]: 0.556
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity Unit: Set
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with accessories
• Transmission Code: 722.9 ECO
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Number: 722.908
• Production date from: 21.06.2010
• Specification: MB236.15
• for PR number: A89
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal
• Manufacturer Restriction: MERCEDES-BENZ
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Quality: OE-SPECIFICATION
• Additive Version: Reduced Friction
• Name: Hdraulikafiltrikomplekt,automaatk„igukast
• Manufacturer: MEY

Transmission Code: W7X 700, W7C 1000, 722.9, 7G-TRONIC +, K7C 1000, K7X 1000, W7B 700, W7C 700, W7N 700 General Information: MEYLE Hydraulic filter complies with the OEM specification Smart-Media™-Triple.

• Transmission ID: 722.908
• Production date from: 21.06.2010
• Transmission Type: 7-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with seal, with accessories
• for PR number: A89
• Transmission Code: 722,9, 7G-Tronic Plus
• Supplementary Article/Info 2: with bolts/screws
• See accessories list for additionally required parts:
• Weight [kg]: 0.731
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Production date from: 1996
• Transmission Code: W5A-580, W5A-330, 722,6
• Transmission Type: 5-Speed Automatic Transmission
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Transmission ID: 722.600 - 722.699
• Number of pins: 12
• Housing material: Plastic, GRP (Glass fibre Reinforced Plastic)
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 140 270 0861
• Name: JUHTSEADE,AUTOM.KŽIGUKAST
• Manufacturer: TRU

• Thickness [mm]: 100
• Length [mm]: 250
• Width [mm]: 250
• Operating Mode: Electric
• Observe service information:
• Fabrication Number: EAT-CH-000

• Transmission ID: 722.908
• Production date from: 21.06.2010
• Housing Colour: black
• Transmission Code: 722,9, K2,EPC,B1,K3
• Transmission Type: 7-Speed Automatic Transmission
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 722.683/722.686, 722,6xx
• Width [mm]: 241
• Height [mm]: 95
• Length [mm]: 226
• Plug Type: Round Plug
• Vehicle Equipment: for vehicles with automatic transmission
• Weight [kg]: 0.67
• Manufacturer: VAICO

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 722.683/722.686, 722,6xx
• Width [mm]: 315
• Height [mm]: 315
• Plug Type ID: VAICO V30-7642, V30-7642
• Length [mm]: 96
• Vehicle Equipment: for vehicles with automatic transmission
• Quantity Unit: Set
• Supplementary Article/Info 2: with plug
• Weight [kg]: 0.437
• Manufacturer: VEMO GERMANY

Transmission Type: Automatic Transmission, 5-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.