• Fitting Position: Charge Air Cooler
• Name: DRM 01675
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Weight [kg]: 0.005
• Inner Diameter [mm]: 62
• Packaging length [cm]: 6.9
• Packaging width [cm]: 6.9
• Packaging height [cm]: 0.5
• Manufacturer: FEBEST

• for OE number: 906 528 01 82
• Length [mm]: 73
• Inner Diameter [mm]: 55
• Inner Diameter 1 [mm]: 62
• Fabrication Number: GPP-ME-026
• Manufacturer: NTY

• Fitting Position: Intake Side
• Manufacturer: FAST

• for OE number: 906 528 11 82
• Material: Rubber with fabric lining
• Connector Ø pressure side [mm]: 65
• Connector Ø suction side [mm]: 65
• Fabrication Number: GPP-ME-016
• Manufacturer: NTY

• for OE number: 906 528 33 82
• Material: Rubber with fabric lining
• Fabrication Number: GPP-ME-030
• Manufacturer: NTY

• Fitting Position: Left
• for OE number: 9065280182
• Quantity Unit: Piece
• Weight [g]: 410
• Material, 1st layer: NBR (nitrile butadiene rubber)
• Material, 2nd layer: Aramid
• Material, 3rd layer: CR (chloroprene rubber)
• Name: Laadimisohu voolik
• Manufacturer: IBR

• Emission Standard: Euro 4/Euro 5/Euro 6
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: Polychloroprene (Neoprene)
• Colour: black
• Hose Length [mm]: 290
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 54.5
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Fitting Position: Charge Air Cooler
• Turbocharger Line: Hot Side
• Supplementary Article/Info 2: with clamps
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Inner Diameter 1 [mm]: 57
• Inner Diameter 2 [mm]: 50
• Fitting Position: Charge Air Cooler
• Supplementary Article/Info 2: with clamps
• Manufacturer: NRF

• Fitting Position: Charge Air Cooler, Inlet
• Supplementary Article/Info 2: with clamps
• Manufacturer: NRF

• Inner Diameter [mm]: 55
• Inner Diameter 1 [mm]: 62
• Manufacturer: FAST

• Thickness [mm]: 4.5
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 59
• Outer Diameter 1 [mm]: 66
• Inner Diameter 1 [mm]: 57
• Manufacturer: FAST

• Emission Standard: Euro 4/Euro 5/Euro 6
• Turbocharger Line: Cold Side, Charge air cooler to engine
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 290
• Inner Diameter 1 [mm]: 57
• Inner Diameter 2 [mm]: 50
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Inner Diameter 1 [mm]: 57
• Inner Diameter 2 [mm]: 50
• Weight [kg]: 0.35
• Guarantee: 3 years guarantee
• Hose Length [mm]: 290
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV655
• Manufacturer: ESEN SKV

• Fitting Position: Right, Charge Air Cooler
• for OE number: 9065280382
• Outer Diameter [mm]: 69
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Fitting Position: Charge Air Cooler, Right
• Inner Diameter 1 [mm]: 57
• Inner Diameter [mm]: 50
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Emission Standard: Euro 3
• Turbocharger Line: Charge air cooler to engine, Cold Side
• Fitting Position: Right Front
• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 50
• Weight [kg]: 0.54
• Guarantee: 3 years guarantee
• Hose Length [mm]: 360
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV670
• Manufacturer: ESEN SKV

• Turbocharger Line: Charge air cooler to intake manifold
• Fitting Position: Charge Air Cooler, Left
• Outer Diameter 1 [mm]: 67
• Outer Diameter 2 [mm]: 73
• Inner Diameter 1 [mm]: 55
• Weight [kg]: 0.482
• Inner Diameter 2 [mm]: 62
• Supplementary Article/Info 2: with clamp
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Emission Standard: Euro 3
• Turbocharger Line: Cold Side, Charge air cooler to engine
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 360
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 50
• Observe broschure:
• Manufacturer: GATES PASKI PRZEWODY

• for OE number: 9065283382
• Weight [g]: 486
• Length [mm]: 354
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 50
• Name: IM 222661
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 906 528 33 82
• Fitting Position: Charge Air Cooler, Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 62
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• for OE number: 906 528 25 82
• Material: Rubber with fabric lining
• Fabrication Number: GPP-ME-012

• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 9065283182
• Manufacturer: SASIC

• Compression ring material: Stainless Steel
• for OE number: 906 528 03 82
• Material: Rubber with fabric lining
• Weight [kg]: 0.517
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• not for emission standard: Euro 3
• Fitting Position: Left, Charge Air Cooler
• Material: CR (chloroprene rubber)
• Turbocharger Line: Hot Side
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MEY

• Fitting Position: Right
• for OE number: 9065280382
• Outer Diameter [mm]: 69
• Supplementary Article/Info 2: with clamp
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Fitting Position: Left, Charge Air Cooler
• for OE number: 9065282282
• Outer Diameter [mm]: 68
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Emission Standard: Euro 4 (D4)
• Inner Diameter [mm]: 49.5
• Outer Diameter [mm]: 58.5
• Turbocharger Line: Turbocharger to charge air cooler
• Wall Thickness [mm]: 4.5
• Fitting Position: Charge Air Cooler, Right
• Outer Diameter 1 [mm]: 65.5
• Inner Diameter 1 [mm]: 56.5
• Weight [kg]: 0.299
• Supplementary Article/Info 2: with clamp
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left Front
• Length [mm]: 303
• Colour: black
• Material: Polychloroprene (Neoprene)
• Supplementary Article/Info 2: with hose clip
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Weight [kg]: 0.42
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV605
• Manufacturer: ESEN SKV

• Fitting Position: Right Front
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 80
• Weight [kg]: 0.5
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV604
• Manufacturer: ESEN SKV

• Emission Standard: Euro 4 (D4)
• Inner Diameter [mm]: 49.5
• Outer Diameter [mm]: 58.5
• Turbocharger Line: Turbocharger to charge air cooler
• Wall Thickness [mm]: 4.5
• Fitting Position: Charge Air Cooler, Right
• Outer Diameter 1 [mm]: 65.5
• Inner Diameter 1 [mm]: 56.5
• Weight [kg]: 0.299
• Supplementary Article/Info 2: with clamp
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 80
• Manufacturer: FAST

Manufacturer: FAST

• Fitting Position: Left Front
• Length [mm]: 442
• Colour: black
• Material: AEM (Ethylene Acrylate Rubber)
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Weight [kg]: 0.69
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV606

• for OE number: 906 528 33 82
• Fitting Position: Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 62
• Supplementary Article/Info 2: with clamps
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Connector Ø pressure side [mm]: 60
• Connector Ø suction side [mm]: 70
• Material: Rubber with fabric lining
• Fitting Position: Left
• Weight [kg]: 0.41
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Emission Standard: Euro 3
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: Polychloroprene (Neoprene)
• Colour: black
• Hose Length [mm]: 305
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 55
• Observe broschure:
• Manufacturer: GATES

• Material: Rubber
• Manufacturer: FAST

• for OE number: 906 528 0382
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: TRU

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 9065281182
• Manufacturer: SASIC

• Fabrication Number: GPP-ME-123
• for OE number: A9065282682
• Fitting Position: Charge Air Cooler, Right

• for OE number: 906 528 25 82
• Fitting Position: Charge Air Cooler, Left
• Outer Diameter 1 [mm]: 69
• Outer Diameter 2 [mm]: 69
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Inner Diameter [mm]: 54
• Manufacturer: FAST

• for OE number: 906 528 26 82
• Fitting Position: Charge Air Cooler, Right
• Outer Diameter 1 [mm]: 63
• Outer Diameter 2 [mm]: 69
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Fitting Position: Left
• Inner Diameter [mm]: 65
• Manufacturer: FAST

• Connector type: OE PUSH CONNECTOR
• Length [mm]: 303
• Colour: black
• Material: Polychloroprene (Neoprene)
• Supplementary Article/Info 2: with hose clip
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Manufacturer: BORG & BECK

• for OE number: 9065281582
• Fitting Position: Left
• Material: Rubber
• Supplementary Article/Supplementary Info: with pipe socket
• Weight [g]: 493
• Connector Manufacturer: HENN
• Length [mm]: 326
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 50
• Name: IM 224483
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Left
• for OE number: 9065282282
• Outer Diameter [mm]: 68
• Supplementary Article/Info 2: with clamp
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Fitting Position: Charge Air Cooler, Right
• Material: AEM (Ethylene Acrylate Rubber)
• Name: Laadimisohu voolik
• Manufacturer: MEY

• for OE number: 9065282582
• Weight [g]: 700
• Connector Manufacturer: HENN
• Length [mm]: 392
• Inner Diameter 1 [mm]: 57
• Inner Diameter 2 [mm]: 55
• Name: IM 222659
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Charge Air Cooler, Left
• Manufacturer: FAST

• Fitting Position: Charge Air Cooler, Left
• Turbocharger Line: Piping to charge air cooler
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MEY

Material: FKM (fluorocarbon rubber), FVMQ [fluorosilicone rubber)

• Material: FVMQ [fluorosilicone rubber)
• Fitting Position: Charge Air Cooler, Right
• Weight [kg]: 0.526
• Supplementary Article/Info 2: with quick couplers
• Name: Laadimisohu voolik
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right
• Inner Diameter [mm]: 64
• Outer Diameter [mm]: 66
• Manufacturer: FAST

Material: FPM (fluoride rubber)/ACM (polyacrylate rubber), FVMQ [fluorosilicone rubber)

• for OE number: 906 528 25 82
• Material: Rubber with fabric lining
• Compression ring material: Stainless Steel
• Weight [kg]: 0.691
• Fitting Position: Charge Air Cooler, Left
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 68
• Inner Diameter 1 [mm]: 51
• Manufacturer: FAST