• Fitting Position: Rear Axle
• Outer Diameter [mm]: 271
• Brake Disc Thickness [mm]: 15.8
• Minimum thickness [mm]: 14
• Height [mm]: 96.6
• Rim Hole Number: 5
• Brake Disc Type: solid
• Centering Diameter [mm]: 85
• Surface: Oiled
• Net weight [kg]: 6.87
• Lisainfo: 1tk. juurde tellida ei saa
• Additional information: 1tk. juurde tellida ei saa

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 16
• Number of Holes: 5
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Quantity per packing unit: 2
• Brake Disc Hub Height [mm]: 80.8
• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Height [mm]: 96.7
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Outer Diameter [mm]: 272
• Centering Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 130
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Miinimumjämedus (mm): 14
• Piduriketta liik: täis
• Ava läbimõõt [mm]: 15
• Pidurikettajämedus [mm]: 16
• Ava Ø (mm): 130
• Aukude arv: 5
• Siseläbimõõt [mm]: 160
• Kõrgus (mm): 96,7
• Tsentri läbimõõt (mm): 85
• Välisläbimõõt [mm]: 272
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Construction Year from: 09.1999
• Piduriketta liik: täis
• Piirangutega toode/piirangu info 2: koos kruvidega
• Kõrgus (mm): 97
• Trumli läbimõõt [mm]: 160
• Pidurikettajämedus [mm]: 16
• Keermemõõt: 15
• Miinimumjämedus (mm): 14
• Välisläbimõõt [mm]: 272
• Aukude arv: 5
• Tsentri läbimõõt (mm): 85
• Ava Ø (mm): 130
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 96
• Outer Diameter [mm]: 258
• Centering Diameter [mm]: 85
• Brake Disc Thickness [mm]: 12
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0241/1832
• Surface: Oiled
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Height [mm]: 96.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3237

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0344/1403
• Surface: Oiled
• Outer Diameter [mm]: 258
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Centering Diameter [mm]: 85
• Height [mm]: 96.6
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3235

• Construction Year to: 09.2005
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 96
• Outer Diameter [mm]: 272
• Centering Diameter [mm]: 85
• Brake Disc Thickness [mm]: 16
• Manufacturer: KAMOKA UK£ADY HAMULCOWE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Axle number to: 119848
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 16
• Height [mm]: 96.5
• Rim Hole Number: 5
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 130
• Hub Diameter [mm]: 180
• Weight [kg]: 6.93
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0100/1658
• Surface: Oiled
• Outer Diameter [mm]: 303
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 13
• Centering Diameter [mm]: 85
• Height [mm]: 83.1
• Name: DE BG2556
• Manufacturer: DELPHI

• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 16
• Välisläbimõõt [mm]: 272
• Kõrgus (mm): 97
• Aukude arv: 5
• Tsentri läbimõõt (mm): 85
• Ava Ø (mm): 130
• Pealispind: värvitud
• Kaal (kg): 7,45
• Trumli läbimõõt [mm]: 160
• Miinimumjämedus (mm): 14
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Construction Year from: 09.1999
• Brake Disc Type: solid
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Centering Diameter [mm]: 85
• Height [mm]: 97
• Number of Holes: 5
• Thread Size: 15
• Bolt Hole Circle Ø [mm]: 130
• Drum diameter [mm]: 160
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0204/0187
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 16
• Height [mm]: 96
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ECE R90 APPROVED
• Registration Type: permitted for vehicles of Class M1/N1
• Minimum thickness [mm]: 14
• Weight [kg]: 6.65
• Hole Arrangement/Number: 7/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Construction Year from: 05.2001
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Number of Holes: 5
• Height [mm]: 97
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 272
• Machining: High-carbon
• Minimum thickness [mm]: 14
• Tightening Torque [Nm]: 130
• Name: BR 08.7725.20
• Manufacturer: BREMBO
• Quantity per packing unit: 2

• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 16
• Ava Ø (mm): 130
• Aukude arv: 5
• Piirangutega toode/piirangu info 2: koos kruvidega
• Kõrgus (mm): 97
• Tsentri läbimõõt (mm): 85
• Värv: must
• Välisläbimõõt [mm]: 272
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Construction Year to: 04.2001
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 16
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 97
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 272
• Machining: High-carbon
• Minimum thickness [mm]: 14
• Tightening Torque [Nm]: 130
• Manufacturer: BREMBO
• Name: BR 08.7725.10
• Quantity per packing unit: 2
• Quality class: Q

• Axle Code: 730.306,386,387,394, 730.395,398,390,399
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 83
• Outer Diameter [mm]: 315
• Bolt Hole Circle Ø [mm]: 85
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27.4
• Centering Diameter [mm]: 85
• Weight [kg]: 10.6
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 16
• Minimum thickness [mm]: 14
• Brake Disc Type: solid
• Number of Holes: 5
• Machining: Alloyed/High-carbon
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 96.7
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 160
• Bore Diameter [mm]: 15
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0248/0947
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 15.9
• Height [mm]: 96.6
• Minimum thickness [mm]: 14
• Surface: Coated
• Inner Diameter [mm]: 160.1
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 05/07
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 7
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355111901
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Kõrgus (mm): 96
• Kaal (kg): 6
• Ava läbimõõt [mm]: 26
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 12
• Miinimumjämedus (mm): 10
• Välisläbimõõt [mm]: 258
• Aukude arv: 5
• Tsentri läbimõõt (mm): 85
• Väändejõud [Nm]: 130
• Ava Ø (mm): 112
• Pealispind: õlitatud
• Pidurisüsteem: Ate / Bosch
• Sillanumber: 7027519, bis L874988/X304860, Z161213/1040000
• Konteineri tüüp: Sahtel
• Hulgaühik: Tükk
• Piirangutega toode/piirangu info 2: ilma kruvideta
• Keskaugu läbimõõt (mm): 5
• Versioon: J
• Kinnitusaukude hulk: 2
• pakendi pikkus [cm]: 26
• pakendi laius [cm]: 26
• pakendi kõrgus [cm]: 10,5
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 272
• Brake Disc Thickness [mm]: 15.9
• Height [mm]: 96.6
• Minimum thickness [mm]: 14
• Surface: Coated
• Inner Diameter [mm]: 160.1
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Diameter [mm]: 15
• Packaging length [cm]: 29.8
• Packaging width [cm]: 29.8
• Packaging height [cm]: 21.5
• Weight [kg]: 7
• Manufacturer: TEXTAR TARCZE HAMULCOWE

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Axle Code: 730.306,386,387,394, 730.395,398,390,399
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 83
• Outer Diameter [mm]: 315
• Bolt Hole Circle Ø [mm]: 85
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27.4
• Centering Diameter [mm]: 85
• Weight [kg]: 11.1
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Kõrgus (mm): 96
• Kaal (kg): 7
• Ava läbimõõt [mm]: 26
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 16
• Miinimumjämedus (mm): 14
• Välisläbimõõt [mm]: 272
• Aukude arv: 5
• Tsentri läbimõõt (mm): 85
• Väändejõud [Nm]: 130
• Ava Ø (mm): 112
• Pealispind: õlitatud
• Pidurisüsteem: Ate / Bosch
• Konteineri tüüp: Sahtel
• Hulgaühik: Tükk
• Piirangutega toode/piirangu info 2: ilma kruvideta
• Versioon: J
• Kinnitusaukude hulk: 2
• pakendi pikkus [cm]: 28
• pakendi laius [cm]: 28
• pakendi kõrgus [cm]: 10
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E4 90R-02C0703/2626
• Surface: Coated
• Machining: High-carbon
• Outer Diameter [mm]: 315
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27.4
• Centering Diameter [mm]: 85
• Height [mm]: 83
• Name: DE BG9145C
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Number of Holes: 5
• Outer Diameter [mm]: 315
• Centering Diameter [mm]: 85
• Height [mm]: 83
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27.4
• Bolt Hole Circle Ø [mm]: 130
• Thread Size: 15
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0176/0691
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Construction Year from: 09.1999
• Piduriketta liik: täis
• Piirangutega toode/piirangu info 2: koos kruvidega
• Kõrgus (mm): 97
• Trumli läbimõõt [mm]: 160
• Pidurikettajämedus [mm]: 16
• Keermemõõt: 15
• Miinimumjämedus (mm): 14
• Välisläbimõõt [mm]: 272
• Aukude arv: 5
• Tsentri läbimõõt (mm): 85
• Ava Ø (mm): 130
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Surface: Coated
• Outer Diameter [mm]: 315
• Brake Disc Thickness [mm]: 30
• Height [mm]: 83
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 27.4
• Weight [kg]: 11
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• for special equipment code: 50401976
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 315
• Brake Disc Thickness [mm]: 30
• Height [mm]: 83
• Minimum thickness [mm]: 27.4
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 157
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Diameter [mm]: 15
• Weight [kg]: 10.9
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355132151
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 30
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 83
• Centering Diameter [mm]: 85
• Outer Diameter [mm]: 315
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 27.4
• Manufacturer: BREMBO
• Name: BR 09.A917.11

• Fitting Position: Front Axle
• for special equipment code: 50401976
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 315
• Brake Disc Thickness [mm]: 30
• Height [mm]: 83
• Minimum thickness [mm]: 27.4
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 157
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Diameter [mm]: 15
• Packaging length [cm]: 32.8
• Packaging width [cm]: 32.8
• Packaging height [cm]: 12.5
• Weight [kg]: 10.9
• Manufacturer: TEXTAR TARCZE HAMULCOWE
• Quantity per packing unit: 2

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, Perforated
• Surface: Coated
• Outer Diameter [mm]: 315
• Brake Disc Thickness [mm]: 30
• Height [mm]: 83
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 85
• Test Mark: ohne ABE
• Minimum thickness [mm]: 27.4
• Weight [kg]: 11
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Outer Diameter [mm]: 315
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27.4
• Brake Disc Type: Vented
• Machining: Alloyed/High-carbon
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 83
• Centering Diameter [mm]: 85
• Inner Diameter [mm]: 157
• Bore Diameter [mm]: 15
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs