Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Transmission ID: 722.630
- Quantity per packing unit: 4
- Colour of operating fluid: red
- Capacity [litre]: 5
-
Specification: MB 236.14,
ATF 134, DSIH 6P805 - Weight [kg]: 4.235
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
- Lisainfo: 36449 FEBI
- Additional information: 36449 FEBI
Technical Information: Make sure that the colours of the previously filled liquid and the new liquid match! General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 12
- Height [mm]: 225
-
Article number of the recommended special tool: V99-
1017 - Transmission Type: for manual transmission
- Colour: yellow
- Capacity [litre]: 1
- Chemical Properties: Contains mineral oil
- Length [mm]: 60
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
-
SAE viscosity class: 80W-
90 -
Weight [kg]: 0.94,
1.19 - Observe service information:
- Packing Type: Bottle
- Width [mm]: 115
- Quantity Unit: Box
- Manufacturer: VAICO
-
Additional information: V60-
0044 VEMO -
Lisainfo: V60-
0044 VEMO
Oil manufacturer recommendation: ZF TE-ML 17A, ZF TE-ML 02B, MIL-L-2105, API GL-4, MAN 341 Typ Z2, MAN 341 Typ E1, Mercedes Benz 235,1, Ford SQM-2C-9008 A General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission ID: 722.630
- Colour of operating fluid: red
- Capacity [litre]: 1
-
Specification: MB 236.14,
ATF 134, DSIH 6P805 - Weight [kg]: 0.931
- Observe service information:
- Name: AUTOMAATKIGUKASTI OLI
- Manufacturer: FEB
- Additional information: F29449
- Lisainfo: F29449
Technical Information: Make sure that the colours of the previously filled liquid and the new liquid match! General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Manufacturer Approval: 236.14
-
Transmission Type: 5-
Speed Automatic Transmission - Transmission ID: 722.6
- Quality: ZF LifeGuardFluid
- Specification: 7.1 MB ATF
- Capacity [litre]: 1
- Packing Type: Bottle
- Manufacturer: ZF
-
Transmission Number: 722.630 5/
1 - Manufacturer Approval (licensed): 236.14
-
Transmission Code: NAG1,
NAG2 -
Transmission Type: 7-
Speed Automatic Transmission - Colour: red
- Packing Type: Bottle
- Chemical Properties: Synthetic
- Capacity [litre]: 1
- Recommended change interval [years]: 5
- Observe system fill quantity:
-
Recommended change interval [km]: 60,
000 - Observe the vehicle manufacturer specifications:
- Length [mm]: 60
- Height [mm]: 225
- Width [mm]: 115
- Weight [kg]: 1.19
-
Article number of the recommended special tool: V99-
1017 -
Article number of recommended accessories: V30-
2254, V30- 2255, V30- 2258 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Number: 722.630 5/
1 -
Transmission Code: NAG1,
NAG2 - Oil manufacturer recommendation: ATF MB 14
- Manufacturer Approval (licensed): 236.14
-
Transmission Type: 7-
Speed Automatic Transmission -
Article number of recommended accessories: V30-
2254, V30- 2255, V30- 2258 - Colour: red
- Capacity [litre]: 5
- Chemical Properties: Synthetic
- Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Length [mm]: 300
- Observe system fill quantity:
-
Recommended change interval [km]: 60,
000 - Width [mm]: 115
- Height [mm]: 230
- Weight [kg]: 4.51
-
Article number of the recommended special tool: V99-
1017 - Packing Type: Canister
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission ID: 722.630
- Colour of operating fluid: red
- Capacity [litre]: 60
-
Specification: MB 236.14,
ATF 134, DSIH 6P805 - Weight [kg]: 54.7
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Technical Information: Make sure that the colours of the previously filled liquid and the new liquid match! General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission ID: 722.630
- Quantity per packing unit: 2
- Colour of operating fluid: red
- Capacity [litre]: 200
-
Specification: MB 236.14,
ATF 134, DSIH 6P805 - Weight [kg]: 186
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Technical Information: Make sure that the colours of the previously filled liquid and the new liquid match! General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Number: 722.630 5/
1 - Fill quantity from [l]: 8.6
- Fill capacity to [l]: 9.1
- Oil manufacturer recommendation: VW G 05
Specification: SPH-IV, Aisin Warner AW-1, HYUNDAI NWS-9638, Hyundai SP IV, MB 236.12, MB 236.14, MB 236.15, MB 236.17, Mitsubishi ATF-J3, Mitsubishi ATF-PA, Mitsubishi SP-IV, Nissan Matic S, SAAB 93 165 147, Toyota Type WS (JWS, VW G 05, VW G 055 162, VW G 055 190
-
Transmission Number: 722.630 5/
1 - Fill quantity from [l]: 8.6
- Fill capacity to [l]: 9.1
- Oil: Full Synthetic Oil
- Oil manufacturer recommendation: JW
Specification: Aisin Warner AW-1, CHRYSLER 68157995AA, DSI H 6-SPEED TRANSM, Fiat 9.55550-AV2, Fiat 9.55550-AV5, Ford WSS-M2C924-A, GM Dexron VI, Honda ATF DW-1, HYUNDAI NWS-9638, Hyundai SP IV, JAGUAR 02JDE26444, Jaguar Fluid 8432, JW
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks