• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Monotube
• Suspension: for vehicles without increased ground clearance
• Shock Absorber Design: Suspension Strut
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• for special equipment code: 486+B00
• Weight [kg]: 0.097
• Packaging length [cm]: 5.8
• Packaging width [cm]: 5.8
• Packaging height [cm]: 2.4
• Manufacturer: FEBEST

• Jämedus/Tugevus (mm): 224
• Siseläbimõõt [mm]: 68
• Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Installatsiooni pool: Esisild
• Siseläbimõõt 1 [mm]: 88
• Kaal (kg): 0,09
• Manufacturer: FEB
• Additional information: FE40088
• Lisainfo: FE40088

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid DB P. CLA/CLS/C W204/A W176/B W246 LE/PR

• Installatsiooni pool: Esisild
• Kõrgus (mm): 224
• vajaminev tükihulk: 2
• soovitatav vahetada paarikaupa:
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: MEY

• Quantity per packing unit: 2
• Installatsiooni pool: Esisild
• Pikkus (mm): 224
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Country Specific Design: USA, Canada
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: GSP AMORTYZATOR

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-süsteem: Ükstoru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-Ehitusliik: Vedruamort
• Name: CFD 562312
• Manufacturer: DACO

Vehicle Equipment: for vehicles without level control, for vehicles with level control Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles with comfort suspension, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without heavy duty suspension, for vehicles without bad road version, for vehicles without increased ground clearance, for vehicles without comfort suspension

• Block Separation:
• Country Specific Design: USA, Canada
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Thread Size: M10x1
• Piston Rod Length [mm]: 18
• Piston Rod Diameter [mm]: 11
• Suspension Strut Outer Diameter [mm]: 40
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Monotube
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles with level control
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-Ehitusliik: Teleskoop-amort
• Manufacturer: ASHIKA-AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with increased ground clearance

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-süsteem: Ükstoru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-Ehitusliik: Teleskoop-amort
• Name: BM SA0785
• Manufacturer: BREMSI

• Vehicle Equipment: for vehicles with level control
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-Ehitusliik: Teleskoop-amort
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with increased ground clearance

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Monotube
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt
• Amort-süsteem: kaks toru
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles with bad road version, for vehicles with standard suspension

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Tagasild
• Amort-Ehitusliik: mitte vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-süsteem: Ükstoru
• Quality class: PJ
• Name: Gas shock absorber

Suspension: for vehicles with bad road version, for vehicles with standard suspension

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

Suspension: for vehicles without sports suspension, for vehicles without increased ground clearance

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort, Amortisaator, kinnitusvedruga
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: DACO

Vehicle Equipment: for vehicles without level control, for vehicles with level control Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles with comfort suspension, for vehicles with heavy duty suspension, for vehicles without sports suspension, for vehicles without heavy duty suspension, for vehicles without bad road version, for vehicles without increased ground clearance, for vehicles without comfort suspension

• Vehicle Equipment: for vehicles with level control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: Amort
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with increased ground clearance

• Vehicle Equipment: for vehicles with level control
• Amort-Ehitusliik: Vedruamort, Amortisaator, kinnitusvedruga
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Installatsiooni pool: Esisild
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension

• Fitting Position: Rear Axle
• Length [mm]: 622
• Length 2 [mm]: 439
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 40
• Spring Type: for vehicles with coil spring suspension
• Name: MM 7429G
• Manufacturer: MAGNETI MARELLI

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• not for country specific design: USA
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Quantity per axle: 1
• Manufacturer: TRW AMORTYZATORY

Suspension: for vehicles with bad road version, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Vehicle Equipment: for vehicles without level control
• Amort-Ehitusliik: Vedruamort
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Installatsiooni pool: Esisild
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: JAPKO

Suspension: for vehicles with sports suspension, for vehicles with bad road version, for vehicles without increased ground clearance

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Fitting Position: Front Axle
• Length [mm]: 502
• Length 2 [mm]: 359
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 58
• Diameter 2 [mm]: 36
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 7220G

• Fitting Position: Front Axle
• Check OE number:
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Quantity per axle: 1
• Manufacturer: TRW AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• for special equipment code: 486+B00
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Weight [kg]: 1.75
• Packaging length [cm]: 54
• Packaging width [cm]: 4.8
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Length [mm]: 502
• Length 2 [mm]: 359
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 58
• Diameter 2 [mm]: 36
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Block Separation:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with comfort suspension, for vehicles without sports suspension, for vehicles without bad road version, for vehicles without increased ground clearance, for vehicles with increased ground clearance, for vehicles without heavy duty suspension, for vehicles without comfort suspension Vehicle Equipment: for vehicles with level control, for vehicles without level control

• Fitting Position: Rear Axle
• not for country specific design: USA
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Parameter: ETOV36X147A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: Amort
• Manufacturer: SAA

Suspension: for vehicles with bad road version, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Quantity per axle: 2
• Manufacturer: TRW AMORTYZATORY

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-196918
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Vehicle Equipment: for vehicles without level control
• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with sports suspension, for vehicles without heavy duty suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 014 643 0001, 014 641 1004
• Replace in pairs only:
• Name: Amort
• Manufacturer: MEY

Suspension: for vehicles with standard suspension, for vehicles with comfort suspension, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Article number of recommended accessories: MK377, MK377A
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Bore Diameter [mm]: 36
• Piston Rod Diameter [mm]: 11
• Weight [kg]: 1.59
• Packaging length [cm]: 67.4
• Packaging width [cm]: 11.7
• Packaging height [cm]: 12.5
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance Guarantee: 5 years guarantee with accessories when replaced in pairs

• Vehicle Equipment: for vehicles without level control
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: KYB

Suspension: for vehicles with sports suspension, for vehicles without heavy duty suspension, for vehicles without comfort suspension, for vehicles without increased ground clearance

• Fitting Position: Front Axle
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X110A
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control SVHC: No information available, please contact the manufacturer!

• Block Separation:
• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA

Suspension: for vehicles with standard suspension, for vehicles with heavy duty suspension, for vehicles with comfort suspension, for vehicles without sports suspension, for vehicles without bad road version, for vehicles without increased ground clearance, for vehicles with increased ground clearance, for vehicles without heavy duty suspension, for vehicles without comfort suspension Vehicle Equipment: for vehicles with level control, for vehicles without level control

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Name: BI 22-197313
• Manufacturer: BILSTEIN
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with bad road version Additional information: "Tootja: BILSTEIN
MERCEDES GLK X204
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
MERCEDES GLK X204
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top yoke, Bottom Clamp
• Suspension: for vehicles without electronic suspension control
• Spring Type: for vehicles with coil spring suspension
• Replace in pairs only:
• Manufactured in: China
• Packaging length [cm]: 88
• Packaging width [cm]: 24
• Packaging height [cm]: 26.5
• Weight [kg]: 10.7
• Net weight [kg]: 9.3
• Manufacturer: ARNOTT