Lisainfo: Sensor, brake lining wear

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 310

• Fitting Position: Front Axle
• Required quantity: 1
• Braking System: for vehicles without ceramic brakes
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Braking System: for vehicles without ceramic brakes
• Block Separation:
• Weight [kg]: 0.005
• Warning Contact Length [mm]: 119
• Brake Type: Disc Brake
• Manufacturer: VEMO GERMANY

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Braking System: for vehicles without ceramic brakes
• Block Separation:
• Length [mm]: 117.5
• Brake Type: Disc Brake
• Weight [kg]: 0.005
• Manufacturer: FEBI HAMULCE
• Additional information: F26370
• Lisainfo: F26370

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• Braking System: not for carbon-ceramic brake discs
• Brake Type: Disc Brake
• Length [mm]: 120
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 470

• Braking System: for vehicles without ceramic brakes
• Block Separation:
• Length [mm]: 117.5
• Brake Type: Disc Brake
• Weight [kg]: 0.005
• Manufacturer: SWAG
• Name: SW 10 92 6370

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo
• Braking System: for vehicles with ceramic brakes
• Length [mm]: 310
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0395A

• Engine Code: M 157.981
• Construction Year to: 04.2013
• Fitting Position: Front Axle, Rear Axle
• Braking System: not for carbon-ceramic brake discs
• Block Separation:
• Length [mm]: 120
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo
• Braking System: for vehicles without ceramic brakes
• Quantity per packing unit: 2
• Length [mm]: 119
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0242A

• Fitting Position: Front Axle
• Brake System: Brembo
• Braking System: for vehicles without ceramic brakes
• Quantity per packing unit: 2
• Length 1 [mm]: 98
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0204

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 98
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Required quantity: 1
• Braking System: for vehicles without ceramic brakes
• Brake Type: Disc Brake
• Length [mm]: 119
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake System: Brembo
• Braking System: for vehicles with ceramic brakes
• Length 1 [mm]: 310
• Brake Type: Disc Brake
• Name: DE LZ0321
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 367
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Brake Caliper Colour: silver, red
• Block Separation:
• Length [mm]: 109.8
• Width [mm]: 75.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 14.5
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.186
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D1373-8485 D1292-840
• Test Mark: E1 90R-011041/1918
• WVA Number: 24473
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 111.6
• Width 2 [mm]: 111.5
• Height 1 [mm]: 64.7
• Height 2 [mm]: 64.7
• Thickness 1 [mm]: 14.8
• Thickness 2 [mm]: 14.8
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Braking System: for vehicles without ceramic brakes
• Length [mm]: 189.3
• Width [mm]: 93.1
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 16.6
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 4.274
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.2011
• Construction Year to: 02.2013
• Braking System: for vehicles with ceramic brakes
• Fitting Position: Rear Axle
• Brake System: BREMBO
• Width [mm]: 131
• Height [mm]: 76.1
• Thickness [mm]: 15.4
• WVA Number: 24702
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 2.19
• Name: VA 302228
• Manufacturer: VALEO

• Braking System: for vehicles with ceramic brakes
• Length [mm]: 131.3
• Width [mm]: 76
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.246
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D1291-8408
• Test Mark: E9 90R-02A0841/3605
• WVA Number: 24681
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 189.8
• Width 2 [mm]: 189.3
• Height 1 [mm]: 93.1
• Height 2 [mm]: 93.1
• Thickness 1 [mm]: 16.6
• Thickness 2 [mm]: 16.6
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2149

• Braking System: for vehicles without ceramic brakes
• Length [mm]: 189
• Width [mm]: 93
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 4.274
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Braking System: not for carbon-ceramic brake discs
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 15.3
• Width [mm]: 109.9
• Height [mm]: 75.9
• Supplementary Article/Supplementary Info: with counterweights
• Brake System: Brembo
• Weight [kg]: 2.05
• Manufacturer: TOMEX BRAKES

• Construction Year from: 06.2011
• Construction Year to: 02.2013
• Fitting Position: Rear Axle
• Brake System: BREMBO
• Width [mm]: 110
• Height [mm]: 75.8
• Thickness [mm]: 15.2
• WVA Number: 24733
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 4
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 2.015
• Manufacturer: VALEO

• Engine Code: M 157.981
• Construction Year to: 04.2013
• Fitting Position: Rear Axle
• Braking System: not for carbon-ceramic brake discs
• Supplementary Article/Info 2: with anti-squeak plate
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 24733
• Thickness [mm]: 15.2
• Width [mm]: 110.1
• Height [mm]: 75.8
• Manufacturer: BOSCH

• Braking System: for vehicles with ceramic brakes
• Length [mm]: 189.7
• Width [mm]: 107.7
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17.6
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 5.356
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for SA code: B06
• Quantity per packing unit: 4
• Manufacturer Restriction: BREMBO
• Width [mm]: 189.3
• Height [mm]: 93.1
• Thickness [mm]: 16.6
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R - 01107/2379
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

Braking System: only in conjunction with steel brake discs, not for carbon-ceramic brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: BREMBO
• Width [mm]: 131.3
• Height [mm]: 76
• Thickness [mm]: 15.5
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R - 01120/2358
• Braking System: for vehicles without ceramic brakes
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Braking System: for vehicles with ceramic brakes
• Length [mm]: 189.7
• Width [mm]: 107.7
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17.6
• Wear Warning Contact: prepared for wear indicator
• Name: SW 10 11 6143
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 157.981
• Construction Year to: 04.2013
• Fitting Position: Front Axle
• Braking System: not for carbon-ceramic brake discs
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 24681
• Thickness [mm]: 16.6
• Width [mm]: 187.5
• Height [mm]: 93.1
• Manufacturer: BOSCH

• Construction Year from: 06.2011
• Construction Year to: 02.2013
• Fitting Position: Front Axle
• Brake System: BREMBO
• Width [mm]: 188
• Height [mm]: 93
• Thickness [mm]: 16.7
• WVA Number: 24681
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 4
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 4.03
• Manufacturer: VALEO
• Name: VA 302231

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: BREMBO
• Width [mm]: 189.7
• Height [mm]: 107.7
• Thickness [mm]: 17.6
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R - 01107/2926
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

Braking System: only in conjunction with steel brake discs, not for carbon-ceramic brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• for SA code: B06
• Quantity per packing unit: 4
• Manufacturer Restriction: BREMBO
• Width [mm]: 189.3
• Height [mm]: 93.1
• Thickness [mm]: 16.6
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9-90R-02A1148/2796
• Manufacturer: TRW

Braking System: Low dust brake pads, also for perforated brake discs, only in conjunction with steel brake discs, not for carbon-ceramic brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• for SA code: B06
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 16.6
• Length [mm]: 187.4
• Height [mm]: 93.4
• Wear Warning Contact: incl. wear warning contact
• Brake Pad: With bevelled edges
• Brake System: Brembo
• WVA Number: 24455, 24681
• Name: SK VKBP80643E
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 110
• Thickness [mm]: 15
• Height [mm]: 76
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories, with counterweights
• Brake System: Brembo
• directional:
• WVA Number: 24733
• Manufacturer: BREMBO
• Name: BR P 50 110

Braking System: for vehicles without ceramic brakes, not for carbon-ceramic brake discs

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 360
• Quantity per packing unit: 4
• Thickness [mm]: 17.6
• Test Mark: R90 Homologated
• Width [mm]: 189.7
• Height [mm]: 93.2
• Weight [kg]: 4.638
• Height 1 [mm]: 93.2
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Packing Type: Box
• WVA Number: 24681
• Packaging length [cm]: 20.6
• Packaging width [cm]: 12.2
• Packaging height [cm]: 7.8
• Manufacturer: JURID

• Fitting Position: Front Axle
• for SA code: B06
• Quantity per packing unit: 4
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 325
• Width [mm]: 189.3
• Height [mm]: 93.1
• Thickness [mm]: 16.6
• Test Mark: E9 90R - 01107/2379
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Braking System: for vehicles without ceramic brakes
• Width [mm]: 109.9
• Height [mm]: 75.9
• Thickness [mm]: 15.3
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 24733
• Brake System: Brembo
• Weight [kg]: 1.6
• Technical Information Number: T2043
• Name: HE 8DB355015721
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 360
• Quantity per packing unit: 4
• Thickness [mm]: 15.5
• Test Mark: R90 Homologated
• Width [mm]: 110
• Height [mm]: 84
• Weight [kg]: 2.12
• Height 1 [mm]: 84
• Wear Warning Contact: prepared for wear indicator
• Brake System: BREMBO
• Packing Type: Box
• WVA Number: 24733
• Packaging length [cm]: 15.5
• Packaging width [cm]: 8.7
• Packaging height [cm]: 8.7
• Manufacturer: JURID

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 189
• Thickness [mm]: 17
• Height [mm]: 93
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• WVA Number: 24681
• Manufacturer: BREMBO
• Name: BR P 50 142

• Fitting Position: Front Axle
• Braking System: for vehicles without ceramic brakes
• Brake Caliper Colour: silver, red
• Quantity per packing unit: 4
• Brake System: BREMBO
• Width [mm]: 189
• Height [mm]: 93
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

Supplementary Article/Supplementary Info: with counterweights, Photo corresponds to scope of supply

• Fitting Position: Front Axle
• Braking System: for vehicles without ceramic brakes
• Width [mm]: 189
• Height [mm]: 93.1
• Thickness [mm]: 16.9
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 24681
• Brake System: Brembo
• Weight [kg]: 4.4
• Technical Information Number: T2047
• Name: HE 8DB355036461
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Braking System: for vehicles without ceramic brakes
• Width [mm]: 189.2
• Height [mm]: 93.2
• Thickness [mm]: 16.9
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with counterweights
• WVA Number: 24455
• Brake System: Brembo
• Technical Information Number: T2698
• Name: HE 8DB355040091
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Brake Caliper Colour: silver, red
• Quantity per packing unit: 4
• Brake System: BREMBO
• Width [mm]: 189
• Height [mm]: 93
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

Braking System: for vehicles without ceramic brakes, Low dust brake pads Supplementary Article/Supplementary Info: with counterweights, Photo corresponds to scope of supply